Tender For Incorporation Of Actuator Operated Delivery Valve On Delivery Header And Providing Shade Over Valve Compartment At Bhalki Pwss Under Cmd, P.H.E. Dte., Dist.- Purba Bardhaman
Tender Value
9.89 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
6 days left
EMD
20500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Incorporation Of Actuator Operated Delivery Valve On Delivery Header And Providing Shade Over Valve Compartment At Bhalki Pwss Under Cmd, P.H.E. Dte., Dist.- Purba Bardhaman
BOQ
| Sl. No. | Item Description |
| 1 | Supply & delivery of following materials - |
| 2 | Actuator Synchropak type model K150F10E 48 RPM, 415V 3 ph AC 50Hz,2 nos, no + NC Torque+ Travel Combined Limit Swutches & 4 nos NO + 1NC Auxilliary Limit Switches, Wiring Diagram no 1610Z00 (Make : Actuator - Rotork/ PHED approved make, Valve : IVI/Jupiter /Cair/ PHED approved make. TC needed for valve & actuator.) |
| 3 | Cast Iron Head Stock 800 mm Height with actuator Base Pad each set for Actuator Base Pad each set for Actuator Mounting with extension shaft 1.5 m Long 28 dia with 2 nis Joint Coupling, no bearing Housing |
| 4 | Operatinng Push button Duel Panel Comprising with close, open, stop push button with element switches close, open & running indicating lamp. 3 phase main switches for each Actuator operation with joint Box 3ph,415V 50Hz AC Panel size 400mm x 300 mm x 600mm |
| 5 | 6 Nos 4\\" x 2\\" x 8ft Long MS Channel for Head Stock Mounting, 8ft x 5 ft MS frame Made by 1/2\\" angle with 3 sets checker plate by 8ft x 5ft x 6mm thick for Platform |
| 6 | Supply 2.5 sq mm 10 core Copper Armoured Cable from Actuator to Panel box in operating Room for power supply 415 V AC 3 ph 50Hz for 2 no actuators |
| 7 | Supply 2.5 sq mm 4 core Copper Armoured Cable from Actuator to Panel box in operating Room for power supply 415 V AC 3 ph 50Hz for 2 no actuators |
| 8 | Fitting Fixing extension shaft with 2 nos coupling & head stock mounting on 2 nos 4\\" x 2\\" channel with proper grouting with concrete & tie nuts bolts & installl actuator on head stock & bearing Housing ,Titghtened by bolt nuts |
| 9 | Fitting Fixing 8 ft x 5 ft MS Grating on upper level of pit as for platform with 1\\" x 1 Angle Made 8 ft x 5ft Framed properly |
| 10 | Cable Laying charges for 4nos cable by Earth cutting with 3\\" dia x 20 mts Long GI pipe |
| 11 | Mounting Charges for Operating Push button Panel with proper Angle support & fastner |
| 12 | Electrical Connection of poer cables & control cable to actuator with control push button panel and switch setting close 7 open both sides and synchronising with dumload conditinn |
| 13 | Making 16 ft Long x 10ft wide x 10 ft height shade by making 1/2\\" x 1/2 \\" Angle, Base Grouting & Corrugated Tie sheet |
| 14 | Add GST @ 18% |
| 15 | Add CESS @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender