Tender For special Repair/Replacement Of Plain Cement Concrete Poles, Street Lights And Connected Items At Si Lines Under Ge Bhopal
Tender Value
47.45 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair/Replacement Of Plain Cement Concrete Poles, Street Lights And Connected Items At Si Lines Under Ge Bhopal
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Aug-2026 | CERTAIN AMENDMENT | BOQ | 29-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in hard/dense soil complete all as specified and directed. |
| 3 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable pipe and getting out in soft disintegrated rock all as specified and directed. |
| 4 | M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for making PCC base and to match with existing surfaces all as specified and directed. |
| 5 | Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 6 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed |
| 7 | M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed. |
| 8 | S&F 40 mm bore GI tubing 'medium grade' for cable raod crossing with all connected fittings, laid in trenches/road/hardstanding and all accessories required for completion of work all as specified and directed. |
| 9 | M&L for road/ hard standing cutting and repairing to damaged roads section in patches with instant ready made premix superior road patching cold bitumen compound with a blend of bitumen, aggregates and high grade polymers to immediate bonding complete all as specified and directed. |
| 10 | M&L for providing of new type - I flat LV unreinforced precast cable cover, size 250mm x 150mm x 40mm for protection of under ground cable complete all as specified and directed. |
| 11 | Supply, Laying, connecting and testing LT XLPE alluminium conductor of size 10 sq mm 4 core, insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade, ISI marked laid in trenches, passing through pipes/ducts, on walls with shadel, etc including taking out old unserviceable cable , any type of following size/core complete all as specified and directed. |
| 12 | Dismantiling and removing of existing plain cement concrete (PCC) Poles including, coping and GI bracket (of any size or type) carefully without making any damage to existing system from site and leveling, matching with existing surface ground level for taking credit complete all as specified and as directed by the Engineer in Charge. |
| 13 | Supply and erection of designer pole made of mild steel painted in Polyester/PU paint with single arm designer bracket height 7.0 mtrs in single or double section having top dia 76 mm and bottom dia 114 mm made up of 3mm thick sheet , suitable for single side mounting of drop down luminaires and welded with a base plate of size 220mm x 220mm x 12mm thick and provided with 1000 mm long single arm bracket for mounting street light fitting complete with provision of 04 Nos of ‘J’ type foundation bolts of size not less than 20 mm dia, 600 mm long embedded in RCC foundation concrete as per manufacturer’s recommendation inclusive of RCC foundation concrete, necessary excavation, earth work & RFR etc complete. A door should be provided at a height of 500 mm from the base plate for accommodating and including provision of TPN aluminium bus bar system suitable for connecting up to 4 core, 16 sqmm aluminium cable and 01 No. of 20 Amp SP MCB for street light protection inside the pole shaft including provision of 3 core 2.5 sqmm PVC insulated PVC sheathed copper conductor cable 1100 volts grade confirming to IS:694 from pole junction box to street light fitting drawn through inside of pole . Radium reflector band / strips of 5cm wide in Black(02 Nos) & Yellow (01 No.) colour shall be provided at a height of 1.25mtr from base plate. Numbering of pole shall be done in black colour on yellow background at suitable place on the pole complete as specified and directed. Make Halonix CAT PART NO HLOP-S95-114/76 or equivalent makeHavells/Bajaj/Crompton as approved by GE. |
| 14 | Supply and fixing of Energy efficient 80W LED ornamental street light fitting made up of spun aluminium alloy housing die cast aluminium heat sink with toughened glass, IP65 protection and impact resistance of IK05 and individual high power LEDs with secondary optics having system lumen efficacy ≥100 lm/W, CCT 5700K, Inbuilt potted electronic LED driver , less than 10% THD, LM 80 certified LED,Open & short Circuit protection,reverse polarity protection, 5 kv internal Surge protection, operating temperature -10 degree to 50 degree C, Over Voltage cut off protection at 310 V(+/-)20 V, LED Indications Red Stable- 230 V AC Available,complete all as specified and directed. Make Halonix CAT PART NO HLOSL-04-80-CWL-01 or equivalent make Crompton/Havells/Bajaj . |
| 15 | Taking down carefully existing serviceable street light fitting of any type/ description from any position (old PCC/steel tubelar pole) including GI pipe bracket and clamps and refixing at new location on new pole/wall incl connecting with pvc insulated flexible 2.5 Sq mm 3 core copper cable upto junction box complete all as specified and as directed by the Engineer in Charge. |
| 16 | M&L for fixing of double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed. |
| 17 | Supply & fix in replacement, testing, commissioning of LT panel board, weather proof, outdoor type powder coated, double door shutter, made out of CRCA sheet 3.15 mm thick outer and 2.00 mm thick for inner door confirming degree of protection IP 66 to with bottom frame made of angle iron 50x50x6 mm outoor,60cm high, floor mounting type with closed Aluminium bus bar chamber of size not less than 1.5 times of incomer including necessary insulator suitable for 3 phase, 4 wire 50 Hz AC, CPRI approved including provn of digital ammeter 0-350A, digital voltemeter 0-500 Volts, CT's of suitable ratio,indicator lamps R-Y-B,selector switches and internal wiring including making PCC block type 30 cm grouting etc all as specified and directed with the following work also includes provision of suitable size of cable glands, cable lugs, nut, bolts,washers etc. )(a) Bus bar chamber comprising 4 Nos Aluminium strip bus bars air insulated and PVC sheathed capacity of size not less than 1.5 times of incomer with colour coding in separate sheet steel chamber of panel box. INCOMING:(b) MCCB 415 volts, 63 amps rating TPN , thermal magnetic based release incoming supply with overload , short circuit and earth fault protection , breaking capacity 16 KA- 1No(c) Digital ammeter 0-500 V with selector switch 96mm x96 mm square flush mounted -1 No(d) Digital ammeter 0-500A with selector switch 96mm x96 mm square flush mounted -1 No(e) Indicating lamps LED panel mounted type RYB-03 NosOUTGOING:(h) Digital timer switch of 5 KW three phase (i) contactor 63 A TPN (Suitable capacity as per sr no - h) -with 2 No + 2 NC(j) 3 way selector switch for manual ON/OFF/Auto switching of street light fittings(k) Internal wiring with single core copper conductor cable /PVC insulated copper strip of suitable size incoming to bus bar and bus bar to outgoing MCCB : 1 Job |
| 18 | M&L earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron including brazing and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 using 20 mm gradded stone aggregate earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 19 | Deduct Schedule of credit (calculation will be done off line) Rs. 146460.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender