Tender For Construction Of Prefabricated Office Accomodation Block At Civil Secretaiat, Jammu For Rs.203.00 Lacs
Tender Value
2.03 Crore
Estimated cost
Bid Submission
17 Aug 2026
5 days left
EMD
4.06 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Prefabricated Office Accomodation Block At Civil Secretaiat, Jammu For Rs.203.00 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing of prefabricated structrure made up of structural steel and polyurethane foam pannels in walls with attached general washroom on ground floor. The prefabricated double storey structure shall be made up of structutal steel and PUF pannels, prepainted coloured profile steel sheets with all design parametres in compliance to all relevent latest codes of design for steel and concrete structure and shall be inclusive of all sub items given below:- The main and partition walls shall be made up of 50mm thick polyurethane foam pannels which shall consists of wall pannels manufactured in sandwitch panel system using two nos. of precast/precoloured steel profile sheets of 0.50mm thickness fitted with 50mm thick insulation of Polyurethene foam (Density 40 KG + 2 kg/cum). The wall panels will be provided with tongue and grooves joint and will be cam lock system for interlocking. All materials required for the manufacture of shelter will be new and shall comply with relevant Bureau of Indian Standard Specifications. The brand of PUF wall panels shall be got approved by the E.I.C. Windows and Ventilators :- Windows shall be made up of three track powder coated Aluminium Sliding window ( of minimum 10 gauge sections having 5 mm thick float glass panes fixed on two leaves and one leaf shall be provided with fixed flyproofing using stainless steel mesh of 1.5 mm aperature). Doors/Shutters :- 35 mm Thick flush door shutters with necessary locking arrangement of approved brand godrej/Harrison stainless steel towerbolts, handles shall be provided with appropriate 10 gauge Aluminium profile sections including all necessary fittings and fixtures. False Ceiling :- Providing and Fixing of false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from MS sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277. The ceiling system is to be fixed to the concealed GI frame work which shall be suspened from the truss member/ roof with all necessary arrangements. The false ceiling shall be made up of calcium silicate /gypsum board tiles of size 600 x 600 mm and 8 mm thick with provision for lights. The roofing shall be provided with 0.5 mm thick pre coated steel profile sheets supposed on purlins/designed steel structural truss with provision of adequate rain water drain/pipes. The minimum prjection all around the roof should be 600mm. The sheets shall be fixed using hot dip zinc coated self drilling hexagonal washer head fasteners. the steel sheet shall be laid with minimum end and side lap of 150mm. Eaves boarding of 150mm height shall be provided with necessary frame work all around the roof structure. Eaves boarding and soffit shall be provided with ACP sheet 4mm thick over necessary frame work. TB1 122X61X3.6 TB2 145X82X4.8 , P1 75X75X4.0 TRUSS HT. 4'-0 40X6 WIND TIE OVER ISA (35X35X5) COLUMN TOP PLATE (40X40X16) ,WITH 12 MM STIFFNER PLATE. Cable End :- Cable end will be covered with same puf panels as of wall upto bottom chord of truss. The triangular truss portion shall be covered with 0.50 mm thick precoated steel profile sheets. Sunshades:- Suitable sunshades made out of prepainted coloured steel profile sheets with angle iron frames shall be provided to the external windows. the minimum projection of sunshaded shall be 450mm and 300 mm wider than the width of the opening. Under flooring :- The plain cement concrete 1:4:8 mix 100 mm thick shall be laid using crushed stone aggregate of 40mm nominal size. Cement concrete flooring 50mm thick shall be provided using cement concrete 1:2:4 mix. All steel members will be provided with 2 coats of red oxide zinc chromate primer before fabrication. The complete cement concrete flooring of 1:2:4 mix , electrification, painting work hwnever required and internal sanitary works as required and approved by Engineer in charge shall be provided. Fasteners and Fittings :- The fastners and fittings for prefabricated structure shall be as per approved/vetted structural design and shall conform to relevant specifications. 450x450x25 MS BASE PLATE ,20DIA J BOLT 750 MM LONG 600 MM EMBEDED IN CONCRETE ,12MM THICK STIFNER PLATE , MB1 3000X150X8MM, MB2 145X82X4.8MM, SB1 145X82X4.8MM, DECK TYPE TR60, 125MM THICK RCC DECK SLAB , SB2 200X100X4.0MM shear studs 19mm dia 75mm long to be provided strictly by using drawn-arc stud welding with specialized welding gun. Staircase details. MB1, MB1A, MB2, MB3 SB1 , SB2 , 8 mm thick chequred plate . Finishes :- All structural steel member shall be applied two coats of red oxide zinc chromate steel primer of apporoved brand and thereafter shall be painted with two coats of synthetic enamel paint. Ground Floor plinth area , First Floor plinth area |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, column footing, Septic tank, Foundation for staging. |
| 10 | Column Pedastal |
| 11 | Suspended floors, roofs, landings, balconies and access platforms. Septic Tank |
| 12 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Edges of slabs and breaks in floors and walls under 20 cm wide |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 16 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five leve |
| 17 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1: 4 ( 1 cement : 4 fine sand) |
| 18 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 19 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 20 | 15mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 21 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design |
| 22 | Constructing brick masonry in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (lightduty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 23 | Providing and fixing 150mm Rigid PVC pipes including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. |
| 24 | Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed. 75mm diameter |
| 25 | 110mm diameter |
| 26 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 27 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, twoor more coats on new work. |
| 29 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade |
| 30 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm) |
| 31 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 32 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete |
| 34 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In all colours, shades, except White, Ivory, Fume Red Brown |
| 36 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 37 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75mm |
| 38 | 110mm |
| 39 | Single Tee with door. 75x75x7 mm |
| 40 | 110x110x10mm |
| 41 | Single Tee without door, 75x75x7 mm |
| 42 | 110x110x10mm |
| 43 | Bend 87.5°. 75mm |
| 44 | 110mm |
| 45 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 46 | \\"Providing and fixing white vitreous china flat back half stall urinal ofsize580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Range of three half stall urinals with 10 liter P.V.C automatic flushing cistern |
| 47 | \\"Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap\\" |
| 48 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 49 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 50 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe 32mm dia |
| 51 | Providing and Fixing Flexible pipe |
| 52 | Providing and fixing 100mm CP Grating |
| 53 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 54 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 55 | Providing and fixing toilet paper holder C.P. brass Vitreous china |
| 56 | Providing and fixing CP towel Ring complete (standard make) |
| 57 | Providing and fixing CP towel Rod complete (standard Make) |
| 58 | Providing and fixing CP angle valve Heavy(standard make) |
| 59 | Providing and fixing of hand jet (for flushing ) |
| 60 | Providing and fixing of long nose bib cock |
| 61 | Providing and fixing of short body bib cock |
| 62 | Providing and fixing of PVC connection (standard make) |
| 63 | Engaging of skilled Labour for skilled nature job required at site during the Execution of work |
| 64 | Engaging of unskilled labour for cleaning the site after the execution of work |
| 65 | Engaging trolley for shifting of mulba from site to beyond the munciplity limit including loading and unloading |
| 66 | Providing and fixing of 4\\" Floor Trap |
| 67 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipesand fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15 mm nomial outer dia pipes |
| 69 | 20 mm nomial outer dia pipes |
| 70 | 25 mm nomial outer dia pipes |
| 71 | \\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipesand fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. \\" External work including trenching, refilling etc. 25 mm nomial outer dia pipes |
| 72 | 32 mm nomial outer dia pipes |
| 73 | 40 mm nomial outer dia pipes |
| 74 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 75 | Providing and fixing of Architectural/Structural design working drawings including services such as Electrical/Plumbing for double story prefabricated structure duly approved by the user department and structural design vetted from IIT/NIT/SMVDU before execution Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender