Tender For Uprating Of 1.8 Km Line Section (1.5 Km Zebra Conductor Line At 400 Kv Hindaun End & 0.3 Km Zebra Conductor Line At Dccpp End) Of Hindaun (400 Kv Gss)- Dholpur Ccpp Line (Presently Charged On 220 Kv) By Zebra Equivalent To Htls Conductor A
Tender Value
2.48 Crore
Estimated cost
Bid Submission
27 Aug 2026
15 days left
EMD
4.97 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Uprating Of 1.8 Km Line Section (1.5 Km Zebra Conductor Line At 400 Kv Hindaun End & 0.3 Km Zebra Conductor Line At Dccpp End) Of Hindaun (400 Kv Gss)- Dholpur Ccpp Line (Presently Charged On 220 Kv) By Zebra Equivalent To Htls Conductor And Refurbishment Of Terminal Bay And Equipment Of Hindaun (400 Kv Gss) -Dholpur Ccpp Line At Both Hindaun And Dccpp End As Per Requirement Including Survey, Supply Of All Equipments/Materials, Erection (Including Civil Works), Testing And Commissioning (On Turnkey Basis) Against Specification No. Rvpn/Ehv/Bn-9018002609 (Ubn-Vpn2627wsob01143)
BOQ
| Sl. No. | Item Description |
| 1 | HTLS Conductor (eq. to Zebra) as per specification requirements |
| 2 | Hardware Fitting/ Accessories for HTLSequivalent to ACSR Zebra conductor |
| 3 | Single Tension string Hardware Fittings (Complete Set for above mentioned Conductor) |
| 4 | Single Suspension Fitting for Pilot String (Complete Set with Preformed Armour Rod for above mentioned Conductor) |
| 5 | Repair Sleeve |
| 6 | Mid Span Compression Joint |
| 7 | Vibration Dampers |
| 8 | T Clamp |
| 9 | Terminal Pad without Hole |
| 10 | TT-Connector (Moose-HTLS) |
| 11 | T-Connector (Twin Moose-HTLS) |
| 12 | PG Clamp (HTLS - HTLS) |
| 13 | PG Clamp (HTLS - Moose) |
| 14 | T-Connector ( HTLS- Tarantulla) |
| 15 | PG Clamp (HTLS - Tarantulla) |
| 16 | PG Clamp (Tarantulla - Tarantulla) |
| 17 | T-Connector (Single Zebra- HTLS) |
| 18 | PG Clamp (Zebra - Zebra) |
| 19 | Replacement of Damaged/broken Disc Insulators during refurbishment of Line |
| 20 | i) 70kN |
| 21 | ii) 120kN |
| 22 | Material/ Equipment for 220 kV Terminal Bays and associated Bus sections |
| 23 | 220 kV 2000 A HDB Motorized Tandem Isolators without EB |
| 24 | Post Insulator for above Isolator |
| 25 | 220 kV 2000 A HDB Motorized Isolators with EB |
| 26 | Post Insulators for above Isolator |
| 27 | 220 kV 2000 A HDB Motorized Isolators without EB |
| 28 | Post Insulator for above Isolator |
| 29 | 220 kV Bay Interconnection with Line & Bus |
| 30 | Clamp/ Connectors + Hardware fittings + Spacers (Twin Tarantulla)/ AAC Tarantulla etc. |
| 31 | Any Other item required for successful completion of work |
| 32 | Survey of existing Transmission Lines alongwith Bays and Buses at terminal substations |
| 33 | Survey of 220/ 132 kV Transmission Lines for Uprating Work |
| 34 | Survey of Terminal Substation for Uprating & Upgrade works |
| 35 | ETC services for 220 kV Transmission Lines |
| 36 | Dismatling of exsiting ACSR Zebra conductor with hardware fittings |
| 37 | Erection of HTLS conductor with associated hardwares and accessories as per technical specification |
| 38 | ETC services for strengthening of existing 220 kV Bays/ Buses at terminal substations |
| 39 | Replacement of of 220 kV Bay equipments (Dismantlling as well as Erection including cabling & earthing requirements as required for commissioning) |
| 40 | 220 kV 1600/2000 A HDB Motorized Isolators with DEB/ EB/ Without EB alongwith PI |
| 41 | Upgrading/ uprating of Bays for [ including dismantalling of existing conductor, erection of new conductor configuration as specified with required clamps, connectors and clamps etc. with interconnection to Uprated lines (for Line Bays) (Clamp/ Connectors + Hardware fittings + Spacers (Twin Tarantulla)/ AAC Tarantulla etc.) |
| 42 | 220 kV Line Bay |
| 43 | Jumpers of any conductor (3 Nos. Y – Type ) between bus to equipment or between equipment to equipment, bus to bus including transportation of conductor, disc insulators and hardware from site store to location, cleaning and assembly of disc insulator as required along with fitting on suspension hardware and erection as required, cutting required length of conductor making connection, fixing of spacers and spacer T Clamps as required , tightening of clamps/ connector, dressing etc for three phases.(Per Jumper Basis) |
| 44 | Any Conductor |
| 45 | Maintenance Service [these charges shall be applicable after the completion of garaunteed performance period of Uprated Lines for 3 years. The charges shall be paybale on actuals |
| 46 | Maintenance services per visit towards any breakdown of uprated line which includes services of expert engineers, technicians alongwith necssary tools/ tackles for its rectification, re-testing and restoring the electric supply through uprated line |
| 47 | Add any other item required to complete the Services for completion of work as per specification requirements Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender