Tender For Maintenance Of Tapovan Dus, Old Russian Blocks, Officer Mess In Rakshanagar Area Of Af Stn Ojhar.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
11 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Tapovan Dus, Old Russian Blocks, Officer Mess In Rakshanagar Area Of Af Stn Ojhar.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified and removal of entire debris as ordered outside MD land complete all as directed. |
| 2 | Demolition of RCC Jalli any thickness , set in cement mortar & fixed in any description and removal of debris as ordered outside MD land complete all as directed. |
| 3 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed. |
| 4 | All as per item 3 here-in-above but exceeding 1.5 Sqm but not exceeding 4 Sqm each |
| 5 | Taking down shutter of any description exc 1Sqm but not exc 2 Sqm each and stacking at site where directed. |
| 6 | Dismantling wall and ceiling board fibre, uplp insulation etc or insulation boards any thickness including cover fillets complete all as directed. |
| 7 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as directed |
| 8 | Dismantling of AC Corrugated or semi corrugated sheet etc any thickness including ridges as in roof covering and stacking at site where directed and removal of debris to a outside MOD land and depositing where directed complete all as directed. |
| 9 | Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed in any mortar , stacking serviceable slbs at site and removal of entire debris as ordered outside MOD land complete all as directed. |
| 10 | M&L for PCC 1:2:4, type B0 (using 12.50 mm graded crushed granite stone aggregate) as in padding to roof , chajja laid to slope & finished even & smooth without using extra cement complete all as specified.(Note : No hand mixing of concrete shall be allowed , the mixing of concrete to be done at ground floor & the mixed materials to be shifted to roof , no extra shall be for the mixing at ground & shifting to roof). |
| 11 | M&L for forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, new work built in cement mortar 1:4 complete all as specified & as directed |
| 12 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x70 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 13 | All same as per item No 12 here-in-above but frames/ chowkats of size 65 x 125 mm double rebate -do - |
| 14 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid Plain door Flush/Skeleton Shutter including wiremesh with CNC Cutting, Door Shutter of 30mm Size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice Husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 modulus of elasticity 850 N/mm2 and resistance for spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of requried size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in Charge. |
| 15 | All same as per item No 14 here-in-above but 35 mm thick shutter size -do - |
| 16 | Supply and fixing factory made uPVC white colour casement (openable) Door area exceeding 1.00 sqm ,made of extruded profiles with wall thickness of 2.3 mm (±0.2 mm), complete in all respects. The Door shall be fabricated from hollow multi-chamber uPVC sections comprising frame size 60 mm × 58 mm, sash size 60 mm × 73 mm, T-profile (one vertical member between two shutters) size 60 mm × 74 mm, and glazing bead size 35 mm × 20 mm. All profiles shall be mitre-cut and fusion welded at corners, including drilling of holes for fixing hardware and drainage of water, and making all necessary arrangements for fixing of hardware. EPDM gasket of 1.2 mm (±0.2 mm) thickness shall be provided. Galvanized steel reinforcement shall be inserted in the required profiles, comprising frame section 28 mm × 21.5 mm, sash section 31 mm × 27.5 mm, and T-profile section 27 mm × 17 mm. The frame shall be fixed to the wall with 8 mm × 100 mm long fasteners. The hardware shall include casement handle made of zinc alloy (white powder coated), Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 4mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 17 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- hambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremeshshall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made size 40mmx 18mm x1.6 mm thick) including glazing with tinted sheet glass panel 4.00mm thick, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws etc, complete.compete all as specified as directed by Engineer -in -charge |
| 18 | Supply and fix factory-made 18 mm thick, 100% Solid WPC (Wood Polymer Composite) Jali of approved pattern and size, manufactured from virgin PVC resin (K Value 58–60, Suspension Grade), calcium carbonate, natural fibres (wood powder/rice husk/wheat husk), and non-toxic additives through single-extrusion WPC foam sheet process, having minimum density of 650 kg/m³. The WPC board shall be manufactured by an ISO 9001:2015 certified company and shall possess minimum screw withdrawal strength of 2000 N (face) and 1100 N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity of 850 N/mm², and Class A flame spread resistance. The material shall be termite-proof, borer-proof, water/moisture resistant, and fire-retardant.The WPC Jali shall be fixed with stainless steel screws/anchor fasteners of approved size, complete all as directed. |
| 19 | Providing & Fixing factory Made Single Exuded WPC (Wood Plastic Composite) louver Panels of 10mm to 18 mm thickness and the sizes are 300mm (Width) x 2900mm (Length). Panels shall be moisture-resistant, termite-proof, Fire-retardant. All joints, Corners and terminations shall be finished with matching WPC trims and accessories. Work includessurface preparation, edge finishing and accessories such as corner profiles and caps adhesive scaffolding and cleaning of surface after installation, complete in all respects as per direction of the Engineer-in-charge. |
| 20 | Supply and fix 0.9 mm thick decorative laminate (Type-I) of approved make, shade, colour, pattern, and smooth glossy/matt finish, to cupboards, shutters, doors, plywood, blockboard, or other approved surfaces at any location as directed. The laminate shall be machine-pressed using approved adhesive strictly as per the manufacturer's specifications. Exposed edges shall be finished with matching self-adhesive edge banding tape, hot-pressed to achieve a neat and durable finish, fixed complete to the satisfaction of Engineer-in-charge. Please Enable Macros to View BoQ information |
| 21 | Supply and fix 0.9 mm thick decorative laminate (Type-I) of approved make, shade, colour, pattern, and smooth glossy/matt finish, to cupboards, shutters, doors, plywood, blockboard, or other approved surfaces at any location as directed. The laminate shall be machine-pressed using approved adhesive strictly as per the manufacturer's specifications. Exposed edges shall be finished with matching self-adhesive edge banding tape, hot-pressed to achieve a neat and durable finish, fixed complete to the satisfaction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender