Tender For Repair, Maint/ Replacement Of Ci/Di/Gi Pipe Lines, Supply Of Essential Chemical For Water Treatment And Allied Work At Fatehgarh Cantt
Tender Value
42.42 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
5 days left
EMD
84840
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Farrukhabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Maint/ Replacement Of Ci/Di/Gi Pipe Lines, Supply Of Essential Chemical For Water Treatment And Allied Work At Fatehgarh Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5m wide and n.exc 1.5m in depth for laying of pipe, cables, etc and getting out in soft/loose soil including forming bottom surface to require slope and gradient complete all as specified and directed |
| 2 | Returning, filling in trenches, including spreading, leveling, watering and wall ramming in layers each n.exc 25cm in soft/loose soil complete all as specified and directed |
| 3 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed |
| 4 | M&L for PCC 1:3:6 type C-2, (using 20mm graded stone aggregate) as in foundation, filling and mass concrete, for filling the cut road / path, for supporting pipes in trenches complete all as specified and directed |
| 5 | Taking out/ Dismantling of CI/GI water mains including all CI fittings of 150mm bore, including cleaning of scale and all loose material from inner part of the bore and removing of lead, complete all as specified and directed.Note:- Excavation & earth work shall be measured and paid for separately under the relevant items of this schedule |
| 6 | All as per item No. 5 above but 100 mm bore |
| 7 | Supply, laying, jointing and testing of 150 mm bore ductile iron (DI) pressure pipes with spigot and socket ends, centrifugally cast, Class K-7, ISI marked, conforming to IS 8329 and other relevant Indian Standards, with factory applied cement mortar lining on the inner surface and finished externally with zinc coating and bituminous finish layer, suitable for push-on joints (Tyton joints), in any length, laid in trenches to the required line and level, including supplying and fixing Tyton EPDM rubber gaskets, cutting pipes where necessary, jointing, hydraulic testing, commissioning complete in all respects as specified and as directed.Note :- Excavation & earth work shall be measured and paid for separately under the relevant items. |
| 8 | Supply, laying, jointing and testing of 100 mm bore ductile iron (DI) pressure pipes with spigot and socket ends, centrifugally cast, Class K-7, ISI marked, conforming to IS 8329 and other relevant Indian Standards, with factory-applied cement mortar lining on the inner surface and finished externally with zinc coating and bituminous finish layer, suitable for Tyton type push-on joints, in any length, laid in trenches to the required line and level, including supplying and fixing Tyton EPDM rubber gaskets, cutting pipes where necessary, jointing, hydraulic testing, commissioning, complete in all respects as specified and as directed.Note :- Excavation & earth work shall be measured and paid for separately under the relevant items. |
| 9 | Re-fixing of 150 mm bore cast iron (CI) water mains obtained from Item No. 5, after thorough de-scaling and cleaning, laid and fixed in trenches, walls, floors or other required positions, including alignment, jointing, fixing with necessary clamps, supports and jointing materials, testing for leakage and making good disturbed surfaces, complete all as specified and as directed. |
| 10 | Re-fixing of 100 mm bore cast iron (CI) water mains obtained from Item No. 6, after thorough de-scaling and cleaning, in trenches, walls, floors or other required positions, including alignment, jointing, fixing with necessary clamps, supports and jointing materials, testing for leakage and making good disturbed surfaces, complete in all respects as specified and as directed. Please Enable Macros to View BoQ information |
| 11 | Re-fixing of 100 mm bore cast iron (CI) water mains obtained from Item No. 6, after thorough de-scaling and cleaning, in trenches, walls, floors or other required positions, including alignment, jointing, fixing with necessary clamps, supports and jointing materials, testing for leakage and making good disturbed surfaces, complete in all respects as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender