Tender For Comprehensive Maintenance Including Smart Periodical And E&M Works At Officers Md Accn At Af Stn Bkt.
Tender Value
41.88 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
10 days left
EMD
83760
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Including Smart Periodical And E&M Works At Officers Md Accn At Af Stn Bkt.
BOQ
| Sl. No. | Item Description |
| 1 | Complete removal of existing treatment on wall/roof projections including fascia cornices etc by scrapping with mechanical sander (having mechanical vacuum machine, scrubber) with sanding pad adjustable size according to height of building of appropriate grit to make surface clean free from dust, loose paint,dirt etc by skilled labour complete all as specified and directed. Note:The Contractor shall ensure that all labour deployed for operations such as painting, miscellaneous building repairs and maintenance works, electrical repair and installation works, and testing thereof comply with the Contract Agreement (CA), applicable statutory regulations, and the norms of the concerned regulatory authorities. All necessary safety measures, certifications, and compliance requirements shall be the sole responsibility of the Contractor. No extra payment or claim on this account shall be admissible or entertained by the Department. |
| 2 | M&L for applying 1 mm thick wall care white putty in two layers on walls complete all as specified and directed. |
| 3 | M &L for preparation of newly putty surfaces of finishing walls with paint of required shade applying two or more coats of 100% Premium acrylic exterior emulsion paint of having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 Sqm on putty surfaces complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) |
| 4 | M &L for preparation of old painted surfaces of walls with paint of required shade applying one coat of 100% Premium acrylic exterior emulsion paint of having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 Sqm complete all as specified and directed. Note:- Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) |
| 5 | M&L for preparation of newly putty surfaces of wall by washing rubbing down and stopping and applying two coats of acrylic distemper (Oil emulsion any tint ready mixed Ist quality) having VOC content less than 50 gm/litre on wall by air less spray machine (Mechanical means) complete all as specified and directed. |
| 6 | M&L for preparation of old distempered surfaces and making good uneven sufaces with plaster of Paris putty whereever required of finishing walls by washing rubbing down and stopping of old distempered surface of wall including cornices etc and applying one coat of acrylic distemper (Oil emulsion any tint) on wall by air less spray machine (Mechanical means) complete all as specified and directed. |
| 7 | M&L for preparation of old plastered surfaces of walls by washing, rubbing down and stopping of distemper and painted surfaces & applying two coats of distemper oil emulsion over a thin layer of wall care putty complete all as specified and directed. |
| 8 | M&L for preparation of old plastered or unplastered decorated surface of walls and applying one coat of cement base paint by air less spray machine (Mechanical means) of any colour complete all as specified and directed. |
| 9 | M&L for preparation of old plastered or unplastered decorated surface of walls and making good uneven surfaces with plaster of Paris putty where ever required of finishing and applying two coats of cement base paint, complete all as specified and directed. |
| 10 | M&L for preparation of old plastered surfaces of wall including cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds and efflorescent salt and treating greasy spots and applying one coat of white wash by air less spray machine (Mechanical means) of any shade and with appropriate binder fevicol or equivalent complete all as specified and directed. |
| 11 | M&L for preparation of new plastered surfaces of walls and applying two coats of white wash by air less spray machine (Mechanical means) of any shade and with appropriate binder fevicol or equivalent complete all as specified and directed |
| 12 | M&L for preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing scrapping down smoke soot moulds and efflorescent salt and treating greasy spots and applying one coat of white wash by airless spray machine (Mechanical means) of any shade and with appropriate binder fevicol or equivalent complete all as specified and directed |
| 13 | M&L for preparation of old painted surface of wood or wood based material of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 14 | M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 15 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high with thick paint, complete all as specified and directed. |
| 16 | M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc with thick paint complete all as specified and directed. |
| 17 | Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (without taking off shutters from frames) and removing from site, including cutting holes for taking out existing holdfasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and repairing to broken jambs/reveals with plaster including white washing or distempering with putty as per existing surface complete all as specified and as directed.Note:- The quoted rate shall be deemed to include for fixing of holdfast in the same opening irrespective of position of holdfasts, plastering of jambs/ reveals including white washing or distempering with putty and no separate items for these shall be paid. |
| 18 | Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and repairing to broken jambs/reveals with plaster including white washing or distempering with putty as per exiting surface complete all as specified and as directed.Note:- The quoted rate shall be deemed to include for fixing of holdfast in the same opening irrespective of position of holdfasts, plastering of jambs/ reveals including white washing or distempering with putty and no separate items for these shall be paid. |
| 19 | Taking down Shutter of any description not exc 1 sqm each complete all as specified and directed. |
| 20 | Taking down Shutter of any description exc. 1 sqm and not exc 2 sqm each complete all as specified and directed. |
| 21 | Supply and fixing of 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 22 | M&L for Decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive on doors as per manufacturer'sinstructions complete all as specified and directed. |
| 23 | S&F IInd class hardwood 35mm thick plain, framed, panelled shutters (minimum 6 panels), with panels of timber panels are raised and have bevelled or chamfered margins and framing is moulded on solid (for each side) complete all as specified and directed. |
| 24 | Supply and fixing IInd class hardwood 35mm thick glazed skeleton shutters (minimum 4 panels), open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge prepared to slide horizontally on beads including S&F bead etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. |
| 25 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type 10mm deep CNC moulding design with 0.12 micron laminated both sides of panelled shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawl strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and as directed. (Note: Stainless steel butt hinges and necessary SS screws shall be paid separately). |
| 26 | Supply & fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window & other Frames/ Chowkhat with double rebate of size 125x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawl strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note:-1. MS hold fast/ lugs or SS dash fasteners shall be paid separately. 2. For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 27 | S&F 35mm thick FACTORY MADE WIRE MESH SOLID WPC Pre-laminated both side DOOR SHUTTER consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, door to be panelled with stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.4mm and XTN Aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. MS powder coated butt hinges size 100mm X 25mm X 2mm and 32mm long steel screws drilled suitable to pass through both the walls of the MS tube. Other hardwares should be fixed with 19X6mm size steel screws etc. as per direction of Engineer-in-charge, manufacturer's specification & drawing complete all as specified and directed. |
| 28 | Supply and fixing factory single extruded WPC (Wood Polymer Composite) solid decorative type 10mm deep CnC moulding design with 0.12 mm laminated both sides shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed. Note:- Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 29 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window & other Frames/ Chowkhat of size 75x50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be paid. |
| 30 | S & F factory made WPC single extruded 100% lead free ISO certified board of 18mm thick pre laminated both side, shutter for kitchen cabinet and cupboard. The laminated shutter should be 12 micron pre-laminated side with different design and other side plain white of density not less than 650 kg/cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity complete all as specified and directed. |
| 31 | M & L for Replacement of UPVC door/UPVC windows of any size not more than 3.00 Sqm (approx) or as per existing glass door/approved including taking out glazed shutters from frames and refixing in the same opening after servicing with and including replacement of broken or unserviceable pivots, hinges floor spring rubber band etc making good to obtain smooth opening and closing all adjustment to make the functional complete all as specified and directed. |
| 32 | M & L for Replacement of UPVC door bearing locks and pull handle powder coated white any type and size complete all as specified and directed. |
| 33 | Taking down existing aluminium doors/windows shutter with frame area not exceeding 2 Sqm and re-fixing in same opening after repair/replace the defective parts (any type of aluminium section) complete all as specified and directed. Note:- Aluminium parts will be measured and paid separately. |
| 34 | S & F Aluminium anodised or powder coated door, window, ventilator frame with one or more rebates and shutter sliding or casement windows as reqd. including grill, jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified and directed. |
| 35 | S&F prelaminated particle board 9 mm thick, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 36 | Material & Labour 18/19mm thick block board, grade 2 quality interior grade, commercial type fixed with screw to timber frame work including taking down complete all as specified and directed. |
| 37 | Material & Labour Decorative laminate type 1 of 0.9 mm thick surface finish, colour and pattern as approved, fixed with approved adhesive as manufacturers instructions complete all as specified and directed. |
| 38 | S&F 100 mm long brass butt hinges with galvanised MS hinge pin etc complete all as specified and directed. |
| 39 | S&F brass handle cast type, size 150 mm, polish bright complete all as specified and directed. |
| 40 | S&F Brass barrel tower bolt of size 200mm with cast or sheet barrel and rolled or cast bolt fixed complete all as specified and directed. |
| 41 | S&F Brass sliding door bolt with hasp sand or die cast brass hasp and fixing bolt and 300 mm long complete all as specified and directed. |
| 42 | S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed. |
| 43 | S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed. |
| 44 | S&F 100 mm long butt hinges with galvanised MS hinge pin etc. complete all as specified and directed. |
| 45 | Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 46 | S&F floor door stopper of aluminium alloy with rubber complete all as specified and directed. |
| 47 | S&F continuous (Piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm complete all as specified and directed. |
| 48 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed. |
| 49 | S&F in replacement of 40mm dia, cupboard knobs fixed with nut, screws and washer of aluminium, bright finished complete all as specified and directed. |
| 50 | S&F in replacement of magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified and directed. |
| 51 | Supply & fixing self closing/auto casement type hinges 90/180 degree complete all as specified and directed. |
| 52 | S&F of stainless steel handles 100mm size kitchen cabinet shutters complete all as specified and directed. |
| 53 | S & F in replacement of Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats complete all as specified and directed. |
| 54 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed. |
| 55 | Supply & fixing Telephonic drawer channels zinc finish with loading capacity 45 kg and size 450/500 mm complete all as specified and directed. (Make: Harrison/ Godrej/Hettich) |
| 56 | S&F in replacement of aluminium 2 lever mortice Lock with all fittings for aluminium door complete all as specified and directed. |
| 57 | S&F aluminium handle size & shape as per existing handle for aluminium door or 200 mm long etc. complete all as specified and directed. |
| 58 | Hacking out old broken glass up to 9.50 m height (any thickness size, quality or description) from steel, Aluminium or wooden frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 59 | S&F 4mm thick plain sheet glass ordinary quality and glazing with oil putty pins/spring pins upto 9.50M height in steel/Aluminium/wooden shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed. |
| 60 | S&F 4mm thick frosted glass panes and glazing with oil putty & pins/spring pins upto 9.50M height in steel/Aluminium/wooden shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed. |
| 61 | S&F 5.50 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 62 | Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and directed. |
| 63 | M&L for Brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius and setting in cement mortar (1:6) complete all as specified and directed. |
| 64 | Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed |
| 65 | M&L for 15mm thick rendering on brick work in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 66 | S & F in replacement of Stainless steel wire cloth upto tripple storey bldg, 0.36mm nominal dia of wire and average width of aperature 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed. |
| 67 | Supply & fixing in replacement of stainless steel type curtain rod chrome finish rust proof, heavy duty including brackets & holders size 22 to 25mm dia as per sample complete all as specified and directed. |
| 68 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 69 | Dismantling floor, hearth or wall tiling including cement mortar bedding/rendering complete all as specified and directed. |
| 70 | M&L for Non-skid coloured Ceramic tiles 300 mm x 300 mm x 6 to 7 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 71 | M&L for Vitrified digital double charge light coloured tiles 600 mm x 600 mm x 8-9 mm thick ( square or rectangular) polished in floors etc. set and jointed with Balendura adhesive or equivalent as approved by AGE and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed. |
| 72 | M&L for Vitrified digital double charge light coloured tiles 8-9 mm thick of size 600 x 100 mm on polished on vertical faces of walls set and jointed with Balendura adhesive or equivalent as approved by AGE and pointed in white or coloured cement to match over and including 10mm thick rough finished plaster in cement mortar (1:4) complete all as specified and directed. |
| 73 | M&L for Glazed ceramic coloured tiles in vertical surfaces 600x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 74 | M&L for south black granite 18-20 mm thick (Jet Black/Telephonic black) work (table rubbed and polished) in steps, pillars, window cills, cooking platforms including half round moulding as reqd, making hole for gas pipe etc. and like in cement mortar (1:4) including pointing in grey cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick CM 1:6 screed bed complete all as specified and directed. |
| 75 | S&F 15mm bore tubes medium grade galvanized with all fittings such as Tees, elbows, unions, sockets, plugs, short lengths etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up old GI tubing complete all as specified and directed. |
| 76 | S&F 20 mm bore tubes medium grade galvanized with all fittings such as Tees, elbows, unions, sockets, short, lengths, plus etc. and fixed complete to walls and ceilings or laid in floors of any length including taking down or up old GI tubing all as specified and directed by Engr-in-charge. |
| 77 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 20mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to existing surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge complete all as specified and directed. |
| 78 | S&F in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and directed. |
| 79 | S&F in replacement of 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed. |
| 80 | S&F in replacement of Brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed. |
| 81 | S&F in replacement of Brass CP bath Mixer with telephonic hand shower suitable 15mm bore of pipe and fixed complete all as specified and directed. |
| 82 | S&F in replacement of 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed. |
| 83 | S&F in replacement of 15mm bore 2 way angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed. |
| 84 | S&F in replacement of chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed. |
| 85 | S&F in replacement of CP jet spray with flexible tube etc complete all as specified & directed. |
| 86 | S&F in replacement of health faucet (hand shower) (ABS body) with 1.2 mtr long flexible tube and wall hook etc complete all as specified & directed. |
| 87 | S&F in replacement of brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified & directed. |
| 88 | S&F in replacement of brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified & directed. |
| 89 | S&F in replacement of toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc. complete all as specified & directed. |
| 90 | S&F in replacement of PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed. |
| 91 | S&F Corner glass shelf size 200 mm radius with bracket and glass complete set etc complete all as specified & directed. (Make- Prayag Droplets collection CAT No-BEA-42) or equivalent. |
| 92 | S&F Glass shelf size 500 X 125 mm radius with bracket and glass complete set etc. complete all as specified & directed. (Make- Prayag Droplets collection CAT No-BEA-45) or equivalent. |
| 93 | S&F in replacement of PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed. |
| 94 | S&F in replacement of 100 mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in cement mortar 1:6 complete all as specified and directed. |
| 95 | S&F in replacement of vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap portion to match with the existing surface of floor complete all as specified and directed. |
| 96 | S&F in replacement of vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipe complete all as specified and directed. (Make:Parryware/Hindware/Jaquar/Prayag) |
| 97 | S&F in replacement of plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. (Make:Parryware/Hindware/Jaquar/Prayag) |
| 98 | S&F vitreous china wash basin white flat back size 550 x 400mm with pedestal excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners complete all as specified and directed.(Make:Parryware/Hindware/Jaquar/Prayag) |
| 99 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 100 | S&F PVC floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement type B1 (1:2:4) complete all as specified and directed. |
| 101 | S&F in replacement of rotational molded polyethylene water storage tanks (white colour, tripple layer) (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position after dismantling (water tank of cap exc 250 ltr and n.exc 500 ltr) and removing to store complete all as specified and directed. |
| 102 | S & F in replacement of gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia complete all as specified and directed. |
| 103 | S&F in replacement of PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes complete all as specified and directed. |
| 104 | Cutting into existing manholes for connecting new drains, making good to pipe 150mm internal dia of pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1, smooth finished complete all as specified and directed. |
| 105 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed. |
| 106 | Supply & Fixed of 100mm bore sand cast iron pipe in any length including jointing with cement in walls complete all as specified and directed. |
| 107 | Supply & Fixing for 75mm bore sand cast iron pipe in any length including jointing with cement in floor/trench complete all as specified and directed. |
| 108 | Supply & Fixing of cast iron bend 100mm bore complete all as specified and directed. |
| 109 | Supply & Fixing of cast iron bend 75mm bore complete all as specified and directed. |
| 110 | Supply & Fixing of branch pieces cast iron single (equal or unequal) 100mm bore complete all as specified and directed. |
| 111 | Supply & Fixing of branch pieces cast iron single (equal or unequal) 75mm bore complete all as specified and directed. |
| 112 | Material and labour in replacement of 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate complete all as specified and directed. |
| 113 | Material and labour in replacement of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate complete all as specified and directed. |
| 114 | M&L for welding in repairs not exceeding 2.5 cm in length, for thickness of metal to be welded exceeding 6 mm but not exceeding 9 mm complete all as specified and directed. |
| 115 | Taking down carefully switch board complete along with old MS rectangular sunk type box heavy/medium duty of size 1 to 8 module from the existing position along with switches sockets regulators etc by unscrewing from board by disconnecting electric connections without damaging existing circuit and conduit complete and reconnecting all connection after completion of job with making good the disturbed surface to match the existing complete all as specified and directed. |
| 116 | M&L for modular metal flush boxes of size 6 module for mounting modular type switches /socket/fan/ regulator etc complete all as specified and directed. |
| 117 | M&L for modular metal flush boxes of size 4 module for mounting modular type switches /socket/fan/ regulator etc complete all as specified and directed. |
| 118 | M&L for modular metal flush boxes of size 3 module for mounting modular type switches /socket/fan/ regulator etc complete all as specified and directed. |
| 119 | M&L for modular metal flush boxes of size 1/2 module for mounting modular type switches /socket/fan/ regulator etc complete all as specified and directed. |
| 120 | M&L for white cover plate with frame of size 6 module for mounting modular type switches /socket/fan/ regulator etc complete all as specified and directed. |
| 121 | M&L for white cover plate with frame of size 4 module for mounting modular type switches /socket/fan/ regulator etc. complete all as specified and directed. |
| 122 | M&L for white cover plate with frame of size 3 module for mounting modular type switches /socket/fan/ regulator etc. complete all as specified and directed. |
| 123 | M&L for white cover plate with frame of size 2 module for mounting modular type switches /socket/fan/ regulator etc. complete all as specified and directed. |
| 124 | M&L for white cover plate with frame of size 1 module for mounting modular type switches /socket/fan/ regulator etc. complete all as specified and directed. |
| 125 | Supply and fixing in replacement of modular switch 1 way 6A 1 module type complete all as specified and directed. |
| 126 | Supply and fixing in replacement of modular switch 1 way 16A 1 module type complete all as specified and directed. |
| 127 | Supply and fixing in replacement of modular Socket 6A 3 pin combined 2 module complete all as specified and directed. |
| 128 | Supply and fixing in replacement of modular Socket 16A - 3/5 pin combined 2 module all as directed. |
| 129 | Supply and fixing in replacement of Modular step type regulator 1 module type all as directed. |
| 130 | Supply & Fixing of LED tube RETRO LED 16 to 22 watt of size 4 ft long complete all as specified & directed. |
| 131 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fitting and fixture and such as switches, sockets ceiling rose, pendent holders, regulators, light fittings any type removing materials to store in safe custody or for credit etc, and making good the disturbed surface of walls and floors etc complete all as specified & directed. |
| 132 | M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in and including making good the disturbed surface of wall with colour washing /distempering the surface to match the existing one in non metallic rigid PVC conduit medium grade 2 mm thick medium 20/25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of 1 to 8 module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete all as specified and directed.Note:- 1. Surface conduit shall be laid in ceiling portion only. 2. One light/fan point controlled by one switch SP 5 Amps, 240 V. |
| 133 | All as per item no 132 but one bell point controlled by one 5 Amp bell push complete all as specified & directed. |
| 134 | All as per item no 132 but point wiring for One 5 Amp socket point controlled by one 5 Amp switch on same board with cable 1.5 sqmm complete all as specified & directed. |
| 135 | All as per item No 132 but point wiring for One 5 Amp socket point controlled by one 5 Amp switch independent board with cable 1.5 sqmm complete all as specified & directed. |
| 136 | All as per item No.132 here-in-before but with two single core PVC insulated & PVC unsheathed copper conductor cable of size 2.5 Sqmm 1100 volts grade and one single core PVC insulated &PVC sheathed solid copper conductor cable of size 2.5 Sqmm 1100 Volts grade as earth continuity conductor including PVC concealed conduit of size 20 to 25 mm with all accessories for 3 pin 15 Amps socket point on independent board complete all as specified and as directed. |
| 137 | S&F ceiling Rose, surface, bakelite 65 x50 mm three terminals, AC, 230 Volts complete all as specified & directed. |
| 138 | M&L in replacement of submain wiring with two run of single core PVC insulated unsheathed multi stranded FRLS-H copper conductor cable of size 4 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as specified and directed. (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate). |
| 139 | M&L in replacement of submain wiring with 4 single core PVC insulated FRLS-H multistrand copper conductor cable of size 10 Sqmm drawn into and including non metallic heavy duty rigid PVC conduit not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand) with all conduit fittings / accessories and 1 run single core 10 Sqmm FRLS-H multistrand copper conductor cable as continuous earth wire complete all as specified & directed. (Note for submain wiring:- 4 run of single core cable and one run of earth wire will be measured as one length) |
| 140 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 2.5 Sqmm solid aluminium conductor complete all as specified and directed. |
| 141 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed flexible two core cable flat or circular of size 6 Sqmm solid aluminium conductor complete all as specified and directed. |
| 142 | M&L for painting of ceiling fan, exhaust fan, with synthetic enamelled paint by spray painting machine including filling cavities with filler one coat after cleaning all dust etc including writing of MES No complete all as specified and directed. |
| 143 | S&F in replacement only ceiling fan motor copper winding with super enamelled copper wire of 1200/1400 mm sweep complete all as specified and directed . |
| 144 | M&L for rewinding of exhaust fan of size upto 300/350 mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model, re-assembling and testing including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size complete and refixing the same after repair complete all as specified & directed. |
| 145 | Supply & Fixing in replacement of ball bearing No 6201/6202 for ceiling fan/exhaust fan including taking out old & UNSV complete all as specified and directed by EIC. |
| 146 | Supply & Fix in replacement of Gun metal bush for ceiling fan/Pedestal an/Air circulator/wall fan etc including dismantling complete all as specified and directed by EIC. |
| 147 | Supply & Fix in replacement for exhaust fan louvers made out of mild steel suitable for exhaust fan of size 300mm sweep including taking down old complete all as specified and directed by EIC. |
| 148 | Supply and fixing in replacement of capacitor 2.5 mfd complete all as specified and directed. |
| 149 | Supply and fixing LED lamp 9/10/12 watt, complete all as specified and directed. |
| 150 | Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V, minimum 120 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified & directed. |
| 151 | Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500/4000 K, 100 lumens/watt, 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours, 2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified & directed. |
| 152 | S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 153 | S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 154 | S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 155 | S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 156 | S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed. |
| 157 | S&F MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed |
| 158 | S&F MCB, triple pole & neutral 63-100 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed. |
| 159 | Supply and fixing modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified & directed. |
| 160 | Supply and fixing PVC casing and caping, 15/ 20mm wide complete all as specified and directed. |
| 161 | Supply & fixing of exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V, 50 Hz , 1200 RPM, copper winding of sweep 250 mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender