Tender For Welcome Maintenance And Misc Repair Work At Offr Md Accn At Victoria Rd, Viswamitra Marg, Pop Rd, Nehru Marg Shivaji Marg And Other Misc Loc In The Area Of Age B/R (East) Under Ge (North) Pune
Tender Value
40 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance And Misc Repair Work At Offr Md Accn At Victoria Rd, Viswamitra Marg, Pop Rd, Nehru Marg Shivaji Marg And Other Misc Loc In The Area Of Age B/R (East) Under Ge (North) Pune
BOQ
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing treatment on old plastered surfaces of wall/ ceiling/floor by filling cracks by crack fill paste of berger or of Techno commercially equivalent in approved makes. make as approved by GE, removing loose paints etc., removing nails etc and making good surfaces by applying white birla/JK wall care putty wherever required , smoothen surfaces by sand paper and applying two coats of acrylic exterior emulsion paint over a coat of primer of any height of Bldg complete all as specified and directed.Note: (i) The contractor shall furnish 5 years performance warranty as per manufacturer of paint (ii) This work will do upto 15 Metre height. |
| 2 | M&L for preparation of old surfaces of wall/ceiling/floor by filling cracks by crack fill paste of berger or of Techno commercially equivalent in approved makes. make as approved by GE, removing loose paints etc., removing nails etc and making good surfaces by applying white birla/JK wall care putty wherever required , smoothen surfaces by sand paper and applying one coats of acrylic exterior emulsion paint any height of Bldg complete all as specified and directed. |
| 3 | M&L Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coats of oil bound distemper on old surfaces of walls all as specified and directed. |
| 4 | -Ditto all as per item 03 here in befotre, but one coat on ceiling surfaces in any description complete all as specified and directed |
| 5 | M&L for complete removal of existing treatment on walls, preparing surfaces and make surface free from loose particles oil stains etc. and surface ideally prewetted, applying white cementitious wall care fine putty average thickness1.50mm complete all as specified and as directed. |
| 6 | M&L for preparation of old plastered surfaces of wall or concrete surfaces and applying two coats of oil bound distemper over a coat of primer on complete all as specified and directed. |
| 7 | M&L for preparation of old decorated plastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed. |
| 8 | M&L for preparation of old plastered surfaces of wall/ceiling and applying one coat of lustre paint complete all as specified and as directed. |
| 9 | M&L preparation of old steel surface in any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 10 | M&L for preparation of old wood or wood based surfaces in anu description and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 11 | M&L for preparation on old wooden surface of any description, width or girth & filling crack by wood filler and applying one or more coats of french polish complete all as specified and as directed. |
| 12 | M&L for preparation of old plastered surfaces of walls and applying one coats of cement base paint complete all as specified and as directed |
| 13 | M&L for complete removal of existing finishes of old plastered surfaces of walls and applying two coats of cement base paint over acoat of primer complete all as specified and as directed |
| 14 | M&L for preparation of old wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying one or more coats of malamine polish till the desired finish is obtained complete all as specified and directed by Engr-in-Charge |
| 15 | Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed |
| 16 | All as per item No 15 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed |
| 17 | M&L for one coat of exterior grade emulsion roof paint over Mangalore tiles by mechanical sprayer upto any height of Bldg cleaning the roof by speed water jet all as specified and directed(Note:- Pianting will be done by using mechanical hydraulically operated crane of adequate height with all safety measures so that there will be no climbing on roof top). |
| 18 | M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as , CEMISTIK PU 50 heavy Duty waterproofing coating or Techno commercially equivalent in approved makes. complete all as per manufacturer instruction as directed by Engr-in-Charge. |
| 19 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50sqm in each pane incl hacking out existing broken glass in any height of bldg complete all as specified and directed. |
| 20 | -Ditto- all as per item No 19 here in before but frosted glass |
| 21 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc in any height of Bldg complete all as specified and as directed |
| 22 | M&L for 15mm thick cement rendering in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement in any height of Bldg complete all as specified and directed. |
| 23 | M&L for 15mm thick cement plaster in CM 1:6 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement in any height of Bldg complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed |
| 25 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed |
| 26 | Writing letters for figures (Block, Roman, Italic or Indian) n.exc 30cm high complete all specified and directed |
| 27 | Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good of surface including removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately) |
| 28 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed. |
| 29 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed. |
| 30 | S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and as directed. |
| 31 | S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and as directed. |
| 32 | S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified and as directed. |
| 33 | S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified and as directed. |
| 34 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed. |
| 35 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed. |
| 36 | S&F in repair PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and as directed. |
| 37 | Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 250 & n. exc. 500 litres capacity of tank complete all as specified and as directed. |
| 38 | -Ditto- all as per item No 37 here in before, but exc. 500 & n. exc. 1000 litres capacity of tank complete all as specified and as directed. |
| 39 | S&F for rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/ outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make: Sintex, Polycon, Rotex |
| 40 | -Ditto- all as per item No 39 here in before but 1000Ltrs capacity complete all as specified and directed. |
| 41 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing GI tubing complete all as specified and as directed. |
| 42 | -Ditto- all as per Srl item No 41 here-in-before, but fixing only |
| 43 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing GI tubing complete all as specified and as directed. |
| 44 | -Ditto- all as per Srl item No 43 here-in-before, but fixing only |
| 45 | S&F in repair 20mm bore Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 46 | -Ditto- all as per Srl item No 45 here-in-before, but 15mm bore complete all as specified and directed |
| 47 | S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm includinguding 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed. |
| 48 | S&F aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or Techno commercially equivalent in approved makes. make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 49 | S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 150 mm handles 2 Nos in each shutter, 200 mm tower bolt 01 No in each shutters , 100 mm 03 Nos stainless steel hinges in each shutter, anodised aluminum snap beading screws etc complete all as specified and as directed. |
| 50 | S&F 4mm thick figured glass, pinhead type in squares exc 0.5 sqm each pane fixed with aluminum frame work complete all as specified and as directed. |
| 51 | S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, complete all as specified and as directed. NOTE: During fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 52 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 53 | S&F for second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt I, section 8, clause 8.24 (a) supplied and fitted to chowkats including complete all as specified and as directed. |
| 54 | S&F for 30 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets/lipping 30X6mm all around the shutters complete all as specified and directed. |
| 55 | M&L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 56 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, ater/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: 1.stainless steel butt hinges and necessary S S screws shall be paid separately 2. All screws shall be self tapping and length of Screw not less than 50 mm. ) |
| 57 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified and as directed. |
| 58 | S &F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified and as directed. |
| 59 | S&F Stainless steel butt hinges medium weight 100mm complete all as specified and as directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm |
| 60 | S&F 100mm butt hinges medium weight cold rolled mild steel fixed with chowkats complete all as specified and directed |
| 61 | S&F 150mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed |
| 62 | S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete all as specified and directed |
| 63 | S&F 250 mm long Stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and including a mini of 6 bolts and nuts, four on bolt plate and two on staple plate (selected quality as approved ) complete all as specified and directed |
| 64 | S&F 250mm long anodised aluminum sliding door bolts with hasp and staple(bolt type) and fixing clip sheet cast or extruded sections and fixing bolts and sliding bolts complete all as specified and directed |
| 65 | S&F stainless steel tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 66 | S&F 125mm long aluminum anodised barrel tower bolts of extruded section and fixed with door complete all as specifed and directed. |
| 67 | S&F stainless steel handle of 150 mm (selected quality as approved) long fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge |
| 68 | S&F for floor door stopper of SS body and tongue not less than 100mm long, anodised with hard drawn steel spring all as specified and as directed. |
| 69 | S&F in repair drapery curtain rod of stainless steel 20mm/25mm dia complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified. |
| 70 | S&F in repair bracket for curtain rod of stainless steel 20mm dia fixed with rawl plug and steel screw complete all as specified and as directed. |
| 71 | S&F in repair 18/19mm thick ply wood for insulation purposes fixed fixed with nails to timber framed work including taking down with existing one complete all as specified and as directed. |
| 72 | S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. includinguding taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 73 | S&F auto closing hinges with stainless steel screws including taking down with existing one complete all as specified and as directed. |
| 74 | S & F continuous (piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed. |
| 75 | S&F stainless steel handle of 75 mm size (modular selected quality of design as approved) fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 76 | S&F in repair stainless steel mortice lock,vertical type, size 100mm with 4 levers fixed to door complete all as specified and as directed. |
| 77 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 78 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified. |
| 79 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 80 | -Ditto- all as per item No.79 above but skirting/dado (area n exc 0.09 sqm) on vertical surfaces including 10mm thick backing coat cement plaster in CM 1:4 complete all as specified and as directed. |
| 81 | M&L for glazed ceramic coloured tiles of size 300x450x7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM1:4 complete all as specified and as directed. |
| 82 | M&L coloured vitrified double charged tiles 8-10mm thick (square/ rectangular) area of each tile n.exc 0.36 sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 of any description complete all as specified and directed |
| 83 | -Ditto- all as per item No. 82 item above but skirting/dado (area n exc 0.09 sqm) on vertical surfaces including 10mm thick backing coat cement plaster in CM 1:4 complete all as specified and directed |
| 84 | M&L for textured heavy duty exterior ceramic tiles of size 300mmx300mmx10mm thick as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 20mm thick in CM (1:6) complete all as specified and directed |
| 85 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub base complete all as specified and as directed |
| 86 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including demolition of existing as directed |
| 87 | M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platfoRM,WHB platfoRM and like set in cement mortar (1:4) including pointing in white or coloured cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling of existing stone slab complete all as specified and as directed. |
| 88 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed. |
| 89 | M&L for Machine cut kota stone slab flooring 18-20mm thick over in riser of steps, skirting, dado and pillar laid over 10mm thick packing of plaster in CM 1:4 and jointed with cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slab complete all as specified and directed |
| 90 | M&L Bees-wax polishing on old marble/stone surfaces of any description, width or girth including cleaning the stone complete all as specified and as directed. |
| 91 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cement including demolition existing concrete and rubbish off the premises complete all as specified and as directed. |
| 92 | S&F for repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long ARM P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor all as specified. |
| 93 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern) EWC white, includinguding trap, connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 94 | Supply and fix in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or of Techno commercially equivalent in approved makes. |
| 95 | S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including 32mm brass CP waste coupling and PVC waste pipe, 32mm dia. complete all as specified and as directed. Make: Perryware Model Aquarius, Cat Pt No – C0466(SP) or of Techno commercially equivalent in approved makes. make as per Appx 'A' as approved by GE. |
| 96 | S&F in repair vitreous china Urinal, Half stall type, white including brass CP 32mm waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe complete all as specified. |
| 97 | S&F in repair vitreous china long stall type Urinal, white including brass CP 32mm waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe Make: Cera 5001 large urinal (white of size 420x395x635mm) complete all as specified. |
| 98 | S&F in repair vitreous china urinal partition white size 580x380mm including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and includinguding 60mm long brass screws, pointing around urinal back in cement paste complete all as specified and as directed. |
| 99 | S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including CP brass waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified. |
| 100 | S&F in repair plastic closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/semi pedestal and WC (Anglo indian type) complete all as specified and directed. |
| 101 | S&F in repair 32mm dia PVC waste pipe for WHB/kitchen sink of length 1.0m including fixing the same complete all as specified and directed Make:Prayag or ISI marked |
| 102 | S&F in repair 32mm dia PVC waste pipe for urinal of length upto1.0m including coupling including fixing the same complete all as specified and directed Make:Prayag or ISI marked |
| 103 | S&F in repair 600mm x 450mm looking mirror of selected quality glass of thickness not less than 5.50mm,with PVC frame and 4mm thick MDF board back fixed to wall with suitable SS screws complete all as specified and as directed. |
| 104 | S&F in repair cabinet mirror plastic body for toilet of size 350mm x 450mm with 4mm thick looking mirror complete all as specified and as directed.Make : Prayag/Polytuff. |
| 105 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including waste coupling waste coupling of CP brass of suitable size, 32mm dia PVC waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm complete all as specified and as directed. |
| 106 | S&F in repair of stainless steel plate rack of size 24\\" X 30\\" X 10\\" complete all as specified and as directed. |
| 107 | S&F in repair hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Prayag Cat Pt No BEA-100 or Techno commercially equivalent in approved makes. |
| 108 | S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Make: Prayag Cat Pt No-6508 or Techno commercially equivalent in approved makes. |
| 109 | S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make : Prayag Cat Pt No 6514 or Techno commercially equivalent in approved makes. |
| 110 | S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make:Prayag Cat Pt No 6502 or Techno commercially Techno commercially equivalent in approved makes. in approved makes. |
| 111 | S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make : Prayag Cat Pt No 6575 or Techno commercially Techno commercially equivalent in approved makes. in approved makes. |
| 112 | S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as directed. Make:Prayag Cat Pt No 6510 or Techno commercially equivalent in approved makes. |
| 113 | S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and as directed. Make:Prayag Cat Pt No 6512 or Techno commercially Techno commercially equivalent in approved makes. in approved makes. |
| 114 | S&F in repair 125 mm round shower rose with 225 mm long SS arm with flange complete all as specified and directed. Make : Prayag Cat Pt No GBOS-606 or Techno commercially Techno commercially equivalent in approved makes. in approved makes. |
| 115 | S&F in repair Toilet paper holder of stainless steel, complete all as specified and as directed. Make: Prayag Cat Pt No GBA 118 |
| 116 | S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1,1:2:4 using 20mm graded stone aggregate complete all as specified and as directed. |
| 117 | S&F in repair grating round 75 mm size of steel CP with/without hole complete all as specified and as directed. |
| 118 | S&F in repair grating round 100 mm size of steel CP with/without hole complete all as specified and as directed. |
| 119 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender