Tender For Provn Of 01 X Pond In Front Of Bldg No P-6, Renovation And Beautification Of Pond Near Firing Range, Aepta And Near 151 Inf Bn (Ta) Jat Aepta At Muzaffarpur Mil Stn And Special Repair To Roofing, False Ceiling & Flooring/Plastering Work, P
Tender Value
46 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
13 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 01 X Pond In Front Of Bldg No P-6, Renovation And Beautification Of Pond Near Firing Range, Aepta And Near 151 Inf Bn (Ta) Jat Aepta At Muzaffarpur Mil Stn And Special Repair To Roofing, False Ceiling & Flooring/Plastering Work, Path, Joinery And Electric Re-Wiring In Bldg No 18 (Cook House) Of 2 Bihar Bn Ncc And Provision Of Tiled Pathway Around Perimeter Wall Of Bldg No P-39 At Military Stn Muzaffarpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Aug-2026 | BOQ | BOQ | 28-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation over areas not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation over areas exceeding 1.5m deep and not exceeding 3m deep and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Excavation over areas exceeding 3m deep and not exceeding 4.5m deep and getting out in soft/loose soil complete all as specified and directed. |
| 4 | Excavation in trenches n exc 1.5m wide and n exc 1.5 m in depth for foundation etc or for shaffs, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 5 | Surface dressing n exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 6 | Removal of excavated materials to a distance exc 50m but n exc 250m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 7 | Returning, filling in, including spreading, leveling watering and well ramming in layers n exc 25cm in soft/loose soil complete all as specified and directed. |
| 8 | M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone and boulders complete all as specified and directed. |
| 9 | M/L for Plain Cement Concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete including sub base of floors complete all as specified and directed. |
| 10 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete as in footing etc complete all as specifed and directed. |
| 11 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 12 | Same as item No 11 above but except bricks. |
| 13 | Supply only integral water proofing compound ISI marked. |
| 14 | M&L 15 mm thick rendering in two layers (10mm & 5mm) on fair faces of bk/concrete surfaces in cm (1:4) with WPC (WPC measured & paid separetely) finished even and smooth (Without using extra cement) complete all as specified and directed. |
| 15 | Supply only 110mm bore PVC pipe (SWR) single socketed, in any length with rubber ring joints, as in weep holes. |
| 16 | M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and directed. |
| 17 | Same as item No 14 above but 5 mm dia and above upto and incl 10 mm dia as in stirrups and binders complete all as specified and directed. |
| 18 | M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed. |
| 19 | The same as item No 18 but in coping |
| 20 | Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 21 | M&L PCC interlocking paver block 60 mm thick (ISI marked) M-35 Grade fixed with grey cement and pigment, laid dry and bedded over and including 50 mm thick sand cushion complete all as specified and directed. |
| 22 | The same as item No 21 but 80mm thick and M-40 Grade |
| 23 | M&L for 100 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 24 | M&L rubber moulded coloured chequred tiles 30cm x 30cm x 25 mm thick set, jointed and pointed in neat cement slurry in floors (with grey cment and pigments) over and including screed bed or bedding 20 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 25 | M&L reinforced cement concrete (M-25 Design mix) (using 20 mm graded stone aggregate) in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete all as specified and directed. |
| 26 | M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in columns, pillars, posts, struts etc complete all as specified and directed. |
| 27 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete. |
| 28 | M&L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed. |
| 29 | Form work to edges of concrete flats, treads, breaks in floors window cills, concrete railing, openings in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified. |
| 30 | M&L for applying two coats of cement base paint over a coat of primer including preperation of new wall surfaces complete all as specified and directed. |
| 31 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick spread, levelled and rammed incl watering complete all as specified and directed. |
| 32 | M&L for loose filling with broken bricks of gauge 80mm to 150mm complete all as specified and directed. |
| 33 | M&L for shingle fillling in floors or paving laid in layers n exc 15 cm thick spread levelled and blinded with earth and rammed incl watering complete all as specified and directed. |
| 34 | M&L broken bricks hardcore of gauge exc 63 mm but not exe 100mm, deposited, spread and levelled in layer n exc 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed. |
| 35 | Supply only chain link fencing of MS GI wire mesh of size 100 x 100 mm, 4.2 mm dia main of GI wire made upto into mattresses or cages, lapped wired including staple etc complete all as shown on drg, ISI marked (IS-2721) |
| 36 | Fixing only chain link fencing of any mesh size or any type including line wire to any type of standard rails/supports etc and straining bolts etc including provision of binding wire complete all as specified and directed. |
| 37 | M&L flat iron fillets fixed to the fencing posts incl all necessary drilling bolting or riveting etc and similar work conforming ot Fe 410-0 or Fe 310-0. |
| 38 | S&F 12 mm dia Mild screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed on both ends each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 10cm but n exc 15cm long. |
| 39 | S&F angle channel as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe-410-0 or Fe-310-0. |
| 40 | M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces exc 10cm girth or width including preparation complete all as specified and directed. |
| 41 | M&L for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 complete all as specified and directed. |
| 42 | S&F 110mm dia PVC (SWR) Pipes single socketed, any lenghth with rubber ring joints , fixed on walls complete all as specified and directed. |
| 43 | M&L Loose filling with aggregates of gauge 40 to 80 mm broken stone boulders complete all as specified and directed. |
| 44 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick spread, levelled and rammed incl watering. |
| 45 | Supply only integral water proofing compound ISI marked. |
| 46 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 47 | Dismantling of Wall Panelling/ false ceiling board ,fiber insulation board any thickness including wooden cover fillets/ aluminium frame work complete all as specified and directed. |
| 48 | S&F anodised aluminium snap grid (size 605 x 605 mm) frame work for false ceiling with hangers 4 mm dia Gl (upto 1200 mm length) adjusting level fixed to rof slabs by means of ceiling cleats made out of Gl flats 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40 mm long and fixeig 4mm thick non asbestos fibre cement building boards on aluminium complete all as specified and directed. |
| 49 | Dismantling of floor, hearth or walls tiles including cement mortar bedding but not backing and rubbish off permises complete all as specified and directed. |
| 50 | M&L Machine cut kota stone slab flooring 20-25 thick over and including 20mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed in coloured cement to match with the floor and polishing complete all as specified and directed. |
| 51 | M&L Machine cut kota stone slab 20-25 thick as a riser of step skirting dado and pillar laid over and including 15mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in coloured cement to match with the floor and polishing complete all as specified and directed. |
| 52 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 53 | M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 54 | M & L for preparation of newly plastered surfaces of wall & concrete and applying 2mm thick wall care putty including preparation complete. |
| 55 | M&L Preparing new plastered surface and applying two coats of oil bound distemper on wall or concrete over Chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 56 | M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete. |
| 57 | M&L for applying two coat of Oil Bound Distemper of any light shade on old surface complete all as specified and directed. |
| 58 | M&L 5 mm thick rendering on fair faces of bk /concrete surfaces as on ceiling in CM (1:3), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 59 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 60 | M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified directed. |
| 61 | S&F sinks with drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm bowl size 410 x 330 x 160 mm complete |
| 62 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified. |
| 63 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete. |
| 64 | M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) complete. |
| 65 | Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each all as spd. |
| 66 | All as per above item No 65 but exc 1.5 Sqm but n.exc. 4 Sqm each. |
| 67 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. |
| 68 | DO but without glazing bar |
| 69 | S&F steel ventilators with top hung shutters including hinges, steel peg stay complete. |
| 70 | S & F 30 mm thick flush shutters solid core construction with particle board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats. |
| 71 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete. |
| 72 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane. |
| 73 | S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as spd. |
| 74 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long. |
| 75 | S&F cast iron door closer hydraulically regulated designation No 03 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg complete |
| 76 | S&F 150 mm long aluminum anodised barrel tower bolts of extruded section as specified. |
| 77 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 78 | S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge |
| 79 | S & F in repair aluminium door shutter with following specification:-(a) chowkhat frame of size 63.00 x 38.10 x1.22 mm @ 0.650Kg/RM(b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM(c) Top and Middle rail of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM(d) Bottom Rail of size 114.30 x 44.45 x 1.29 mm @ 1.139 KG/RM(e) Partialy 6 to 8mm ACP Cladding/9mm thick prelaminated particle board both side decorative(f) Partialy 5.5 mm thick tinted glass. (g) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass. (h) Two No.Disk Type Aluminium handle 200 mm long.(i) One No. Mortice lock and jointig cleat. |
| 80 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 81 | S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete. |
| 82 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. |
| 83 | M&L for providing cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in coaping, water toughs incl weathering, slighting rounded or chamfered angle and throuting incl necessary from work all as directed. |
| 84 | S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete. |
| 85 | S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete. |
| 86 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. |
| 87 | S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete. |
| 88 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia. |
| 89 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia. |
| 90 | Supply and Fixing 15 mm dia GI Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified. |
| 91 | Supply and Fixing 20 mm dia GI Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified. |
| 92 | Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe. |
| 93 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 94 | M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed |
| 95 | S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed. |
| 96 | S&F in repair 5 mm thick looking mirror selected quality glass exc 0.50 sqm each and fixed to wall with stainless steel flat head mirror screw cups and washers including polished , rounded off edges of glass and drilling hole in glass complete as specified and directed. |
| 97 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete. |
| 98 | S/F in repair rotational moulded polyethylene water storage tank triple layer of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position complete as specified and directed. |
| 99 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 100 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed. |
| 101 | S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed |
| 102 | M & L for 75 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3 complete all as specified and directed. |
| 103 | M&L for complete removal of existing unserviceable water proofing treatment from top of roof and canopies/chajjas of building including removal of debris out side MD land all as directed. |
| 104 | M&L brushing neat cement slurry @ 3Kg of cement per square meter complete all as specified and directed. |
| 105 | M&L for 10mm rendering on roof surfaces/ concrete surface in CM 1:4 complete all as specified and directed. |
| 106 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(i) Properly cleaning and drying concrete surfaces.(ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.(iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.(iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.(v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. |
| 107 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as reqd to facilitate demolition)such as cooking platforms, chajjas etc. |
| 108 | M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded aggregate) including necessary form work complete all as specified and directed. |
| 109 | S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips. |
| 110 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness ( below or above ground level) |
| 111 | M&L for 150mm thick PCC 1:4:8 Type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 112 | M&L for 18mm thick granite slab (of any type) work (table rubbed and polished) in cooking platform, steps, windows cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender