Tender For special Repair Of Roof Seepage, Chajja In Shivalik Enclave Under Age B/R-Ii And Provn Of Lightening Conductor With Accessories At Mag, Kote, Line Area And Office Complex Under Age E/M-I Of Ge (N) Mamun
Tender Value
48.60 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
19 days left
EMD
97200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Roof Seepage, Chajja In Shivalik Enclave Under Age B/R-Ii And Provn Of Lightening Conductor With Accessories At Mag, Kote, Line Area And Office Complex Under Age E/M-I Of Ge (N) Mamun
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick tiles, terracing tiles, single layer from roof laid, beded and pointed in any mortar, complete all as specified and directed |
| 2 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for taking out old APP membrance and removal of rubbish beyond MOD land complete all as specified and directed. Roofs, floors (other than ground floors), beams, staircases, landing, chajjas of any description as required to facilitate demolition, rubbish off the premises complete all as specified and directed |
| 3 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. |
| 4 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed. |
| 5 | M&L for PCC tiles (300mm x 300mm x 20 mm) laid on and including 20mm thick cement sand mortar in the ratio of 1:4, set, grouted flush and jointed in neat cement slurry , complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B-0 ( using 12.5mm graded crushed stone aggregate) padding as roof mixed with microfilament (crack and control fiber) on neat cement slurry mixed with URP/SBR in cluding WPC as per manufacturer's instruction, surface finished even and smooth without using extra cement complete all as specified and directed.Note: WPC shall be measured and paid for separately.. |
| 7 | 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid as per manufacturer instruction or 0.200 ltr in 50 Kg of cement, complete all as specified & directed Note : WPC Shall be measured and paid separately. |
| 8 | Supply only liquid water proofing compound |
| 9 | M&L for preparation of surfaces and apply first coat of non toxic Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 300%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure & reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.50 ltr/sqm. Apply third and final coat undiluted @0.50ltr/sqm complete application to be done by the manufacture or authorised applicator complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 10 | M&L for preparation of surfaces and apply first coat of non toxic Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 300%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure & reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.50 ltr/sqm. Apply third and final coat undiluted @0.50ltr/sqm complete application to be done by the manufacture or authorised applicator complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender