Tender For Repairs To Pot Holes, Resurfacing Of Approach Roads Under Age B/R-I Area At Ge (N) Ahilyanagar
Tender Value
95 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
10 days left
EMD
1.68 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Pot Holes, Resurfacing Of Approach Roads Under Age B/R-I Area At Ge (N) Ahilyanagar
BOQ
| Sl. No. | Item Description |
| 1 | M&L Scarifying or picking gravelled, WBM surfaces in area exc 400 sqm exc 50 mm and n.exc 100mm deep complete and getting out the debris from the site complete all as specified and as directed. |
| 2 | M&L for 75mm thick (Compacted thickness) WBM with crushed stone aggregates (granite or trap or basalt) of grading 02 (63mm to 40mm size) or of grading 3 (50 to 20mm size) spread rolled with 08 to 10 tonne power roller and consolidated to a required camber and gradient completely all as specified and directed. |
| 3 | Labour only for 75mm thick (Compacted thickness) WBM with crushed stone aggregates (granite or trap or basalt) of grading 02 (63mm to 40mm size) spread rolled with 08 to 10 tonne power roller and consolidated to a required camber and gradient completely all as specified and directed. |
| 4 | M&L for Preparing unsurfaced water bound macadam surface of road by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned surfaces with mechanical compressor tor remove all loose dirt etc and Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate of application of 0.85 kg/sqm on surface of WMM/WBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed. |
| 5 | M&L Scarifying or picking gravelled, macadam or bituminious macadam surfaces in area exc 400 sqm n.exc 50 mm deep complete and getting out the debris from the site complete all as specified and as directed. |
| 6 | Preparing existing black top surface of road by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the surfaces with mechanical compressor tor remove all loose dirt etc and Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.25 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified |
| 7 | M&L premixed bituminous macadam with binder content 4 % by weight of total mix of paving bitumen VG-30 compacted thickness 75mm or less, laid and rolled to required camber and gradient using power roller etc all as specified. (Note: Premixed bituminous macadam shall be brought from Hot Mix Plant and spreading shall be done using mechanical paver and SDAC shall be done within 48 hours after completion of rolling and consoliation of BM). |
| 8 | M&L bituminous premix asphaltic semi dense concrete 30 mm thick consolidated thickness with 5 % binder content by weight of total mix using paving bitumen VG-30 penetration, spread using mechanical paver and rolled & compacted to required gradient and camber using power roller 8 to 12 tonne capacity.(Note: SDAC shall be brought from Hot Mix Plant and spreading shall be done using mechanical paver ). |
| 9 | M&L Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat@ 5 kg per 10 sq m, using paving bitumen VG-10 putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm all as specified and directed. |
| 10 | M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.0 mm thick single coat as a centre line or edge line etc, road marking n.exc 100 mm width using thermo plastic paint (Hot application) white/yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be confirming to BS-6086 of most specification including spraying of glass beads etc complete all as per manufacturer's instructions complete as all specified and directed. |
| 11 | S&F in repair for PVC Road speed Breaker of 350 mm width and 50 mm height as per available length in the market including filling of the concrete in bottoms voids & Bitumen / Adhesive and required nails complete all as specified and as directed by Engr-in-Charge. |
| 12 | S&F in repairs cat eye solar reflective type of ABS body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions (Reflectors Yellow/Red) complete all as specified and as directed. |
| 13 | S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender