Tender For special Repair To Bldg No P-23 (Single Or Accn) At Entity ‘B; Weu And Jcos Club Bldg No P-21 At Entity ‘B 61 Weu, Hirankunda And Other Sanction Work Under Ge (North) Delhi Cantt-10
Tender Value
49.99 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
13 days left
EMD
99990
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-23 (Single Or Accn) At Entity ‘B; Weu And Jcos Club Bldg No P-21 At Entity ‘B 61 Weu, Hirankunda And Other Sanction Work Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing to store complete all as specified. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n.exc 4 sqm each and removing to store complete all as specified. |
| 4 | Dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed. |
| 5 | M&L Coloured Glazed ceramic tiles in vertical surface 600 x 300 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in dado/ skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. |
| 6 | S&F Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished,light shade, area of each tilesnot exceeding 0.42 sqm but not exceeding 1.0 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed |
| 7 | S&F Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished,light shade, area of each tilesnot exceeding 0.42 sqm but not exceeding 1.0 sqm, set and jointed in neat cement slurry andpointed in white or coloured cement to match over 10mm thick backing coat in CM 1:3 in vertical surfaces complete all as specified and as directed |
| 8 | M&L for non skid coloured tiles 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm and not exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match, over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 9 | M&L for non skid coloured tiles 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm and not exc 0.38 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match, over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 10 | M&L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified. |
| 11 | S&F for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed baluster; walk ways; railings; framework of watertanks and similar work confirming to Fe-290. Gde-E-165 |
| 12 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 13 | S& F 300mm long Stainless steel , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections and fixed. |
| 14 | S&F in repairs Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods complete all as specified and directed. |
| 15 | S&F 30mm thick, WPC, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for including securing with wire cloth etc,all as specified and directed. |
| 16 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed. |
| 17 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 18 | S&F for 150mm long stainless steel, barrel tower bolt , extruded section complete all as specified. |
| 19 | S&F for 150mm size Stinless steel handle, fabricated type, complete all as specified and directed. |
| 20 | S&F lnsulated 5mm to 8mm thick PVC Wall panels (Hollow/sandwitch) docorative type plain/groved and coloured/designed interlocking feathered unInsulated Panels complete all as as per specifications and drawing complete all as specified and directed. |
| 21 | S&F lnsulated PVC Wall Lining (thickness of PVC wall lining 25mm) consisting of PVC Insulated Panels with wood grain printed PVC sheets having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing including PVC Corner and taking down existing lining complete all as specified. |
| 22 | S&F for GI Decorative Coreners for PVC wall lining including necessary cutting screwing etc complete all as specified and directed. |
| 23 | S&F Factory made Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type door/window/ ceosetory windows & other frames / chowkat of size 65 x 125mm compressing of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boady threaded star headed SS screws having minimum density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast /Lugs/SS dash fastebers if required dia and length complete all as per direction of Engineer-in-Charge (MS holdfast /lugs or SS dash fasteners shall be paid separately) Note : for WPC solid door/window frames. minus 5mm tolerance in dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 24 | S&F Solid PVC factory made door frame of size 50x47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube complete all as specified and directed. |
| 25 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 26 | S&F 100mm long, stainless steel Butt hinges complete all as specified and directed. |
| 27 | S&F 75mm long Stainless steel butt hinges and fixed, complete all as specified and directed. |
| 28 | S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber beading joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc |
| 29 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm grades stone aggregate as in sub base as a leveling course complete all as specified and directed. |
| 30 | M&L for plain cement concrete 1:3:6 type C-1 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment , and the like, finish the surfaces even and fair without using extra cement all as directed and specified |
| 31 | M&L 15mm bore GI tubing medium grade with all fittings and fixed, including taking up or down steel water tubing and connections and removal from site 15mm bore pipe and complete to walls, ceiling or laid in floor all as specified. |
| 32 | M&L 20mm bore GI tubing medium grade with all fittings and fixed, including taking up or down steel water tubing and connections and removal from site 15mm bore pipe and complete to walls, ceiling or laid in floor all as specified. |
| 33 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting not exceeding 10cm girth |
| 34 | S&F in repair 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, complete all as specified and directed.Make : CERA/Pyariware/Hindware |
| 35 | S&F in repair Angle valve with wall flange, 15mm bore, fancy type, chromium plated with long shank and cup, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified |
| 36 | S&F in repair 15mm bore Brass CP coated 2 way bib tap complete all as specified |
| 37 | S&F in repair 15mm bore Wash Basin Hot & Cold Mixer single lever copper alloy chromium plated with crutch or butterfly handle screwed down, complete all as specified and directed. |
| 38 | S&F Health haucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 39 | S&F CP toilet paper holder with flat recessed type stainless steel complete all as specified. |
| 40 | S&F CP soap dish fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge Make Jaquar (AKP-35731P) or Prayag Cat Part No BA - 25. |
| 41 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washes complete all as specified and directed. |
| 42 | S&F 1500mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washes complete all as specified and directed. |
| 43 | S&F 20mm in repair dia brass CP Tubular towel rail , D type, 60cm long between flanges complete all as specified and directed. |
| 44 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed. |
| 45 | M&L 32mm bore brass CP bottle traps for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap. all as specified and directed. |
| 46 | S&F in repair vitreous china wash down water closet pan ( Pedestal pattern ) EWC ,white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete Make-EWC HINDWARE or equivalent fixed in repair |
| 47 | S&F in repair water closet squatting pan ``Orissa pattern`` 580mm x 440mm, white with integral foot rests including fixing charges of flushing cistern, connection to trap, anti syphonage pipe and provn of lime concrete etc complete all as specified. |
| 48 | Supply only PVC low level flushing cistern valveless, 10 ltr capacity syphonic action type with inlet ball valve, float handle including brackets and (HDPE) flush pipe of 32mm dia with brass nut & washer, PVC connecting pipe, etc. connecting with WC inlet and making good the surface to match with existing complete all as directed and specified. Make : PARRYWARE/CERA |
| 49 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 50 | Dismantling water tanks exc. 250 ltr & n.exc 500 ltr and removing complete all as specified and directed |
| 51 | Dismantling water tanks exc 500 ltr & n.exc 1000 ltr and removing complete all as specified and directed |
| 52 | S&F rotational moulded polythene water storage tanks white colour, multi-layered, 500 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20mm bore PTMT high pressure rate float valve with aluminium rod and ball screwed for iron pipe complete all as specified and directed. |
| 53 | S&F rotational moulded polythene water storage tanks white colour, multi-layered, 1000Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20mm bore PTMT high pressure rate float valve with aluminium rod and ball screwed for iron pipe complete all as specified and directed. |
| 54 | S&F in repairs brass chromium plated shower rose 125mm size Complete all as specified. Make : CERA/Pyariware/Hindware |
| 55 | S&F Stop valves,fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : CERA/Pyariware/Hindware |
| 56 | S&F in repairs 15mm bore Brass ball valves complete all as specified and directed.Make : CERA/Pyariware/Hindware |
| 57 | S&F in repairs 20mm bore Brass ball valves complete all as specified and directed. |
| 58 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 59 | M&L for providing plain cement concrete with Nano filler 1: cement 1; sand 2: agregate 4 type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed.Note:- (i) Minimum thickness of PCC shall be 30mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item here in after(ii) PCC shall be laid to acheive true slope towards the drain/weep holes. |
| 60 | M&L for applying a coat of Nano technology based water proofing compound (1 part powder : 1 part liquid), of desired consistency with nylon brush @ 5 sqm/kg coverage over vertical/horizantal surface of RCC roof and parapet complete all as specified. |
| 61 | M&L Water Proofing:a) Surface Preparation - Mild Chipping of the surface, Clean the Surface with Nano Bio wash.b) If onlinr leackage found seal with Nano magic and apply nano Bond coat.Open the cracks by making ‘V’ groove, filling cracks with Nano Crack Filler.c) Aplly Nano carbon baesed shorter chain Nano Bond Coat d) Providing and applying Nano Water Base Water Proof compound one coats after surface preparation using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing rate above 98% and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 75degree , permeable type with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT.e) If ant crack found open and fill the crack with nano carbon base filler and bond coat.and use nano wall filler to reduce the undulation.f) Apply Nano high penetration Bond coat two coat.g) Providing and applying Nano Barrier Coat Paint/ Nano Water Base Water Proof Paints 2 coats over screed concrete using brush, not containing toxic materials like Pb, Cr, Zn; having defect-free nano-particles with inhibiting characteristics having bacteria killing and anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 60 micron DFT per coat. |
| 62 | M&L for applying a coat of heat resisting paint ( aluminium bitumen paint) over APP surface, complete all as specified and directed . |
| 63 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 64 | M&L Chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick , set jointed and pointed in neat cement slurry in floors with grey cement and no pigments over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 65 | Dismantaling plain or corrugated AC sheeting any gauge, thickness, including nainital or similar pattern roof covering all as specified and directed.. |
| 66 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of sky blue/ sea green colour having tensile strength of 550 MPa as in roof covering, fixed with self tapping screws/ J hooks if required complete all as specified and directed. |
| 67 | S&F steel work in tubular trusses, purlins, false rafters including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St. 240. |
| 68 | Dismantling structural steel work including doors, gates but excluding framed trusses all as specified and directed by engineer-in-charge. |
| 69 | S&F MS plates (plain or chequered) channels, square cut or notched ordinary and counter sunk) forming holes, without any attachment confirming to Fe -290 (Gde E-165) complete all as specified. |
| 70 | Dismantling loose concrete cover of RCC coloums, beams, slabs, Chajjas (Soffit only), and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75mm x 75mm of 2mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 25mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive / admixture at the rate as per manufacturers instruction or 3% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including 15mm thick plaster in cement mortar 1:4, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed (Guniting work is to be carried out upto 06 mtr height from ground level). Notes :- (i) Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co. or their authorized dealer. |
| 71 | M&L for 18-20mm thick Granite stone work (table rubbed and polished) fixed with neat cement paste as fixing material as in steps, jambs, pillars, window cills, Wall lining, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished and including dismantling of old stone slabs complete all as specified and as directed by the Engineer-in-Charge.Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account. |
| 72 | M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base complete all as specified and directed. |
| 73 | M&L for 25mm thick cement concrete Type B0 1:2:4 (12.5mm aggregate) in providing roof padding,roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed. |
| 74 | Demolition and breaking up drain pipes any size (CI) set in cement mortar incl all fittings including necessary scafolding or mechanical arrangements by contractor complete all as specified. Please Enable Macros to View BoQ information |
| 75 | Demolition and breaking up drain pipes any size (CI) set in cement mortar incl all fittings including necessary scafolding or mechanical arrangements by contractor complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender