Tender For Repair/Restoration Of Certain Wooden/Steel Furniture And Desks And Sofa Various Type Under Ge (East) Mathura
Tender Value
1.29 Crore
Estimated cost
Bid Submission
04 Sep 2026
18 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Restoration Of Certain Wooden/Steel Furniture And Desks And Sofa Various Type Under Ge (East) Mathura
BOQ
| Sl. No. | Item Description |
| 1 | BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : HQ CWE MATHURA CANTT Name of Work : Repair/restoration of certain wooden/steel furniture and desks and sofa various type under GE (East) Mathura Contract No : CWE/MTR/E/ OF 2026-27 Bidder Name : SCHEDULE 'A' (BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item and Drawing Number Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate In Figures To be entered by the Bidder Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total Amount TOTAL AMOUNT With Taxes Total AmountIn Words |
| 2 | Repair of under mentioned furniture items will be carried out as follows:-(a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/ Engr-in-Charge. All furniture items is to be painted /polished only after making the entire item intact by tightening the joints.(b) Work will be executed where the furniture exist in different User Units/Md accns of GE (East) Mathura including BSO's Furniture Yard as directed by GE/Engineer-in-Charge.(c) All Timber shall be of 1st class seasoned hard teak wood free from knots and cracks else specified in drg.(d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items.Side Board (FD-26, FD-241, 372, FD-371 & FD-1112) |
| 3 | Cabinet box complete with vertical and horizontal partitions made of 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 4 | Top and bottom for Cabinet box with 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive as per drg. |
| 5 | Sides for cabinet box with 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive, all as per drg. |
| 6 | Drawers front side will be made of 18mm thick BWR grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in sides and back shall be of 12mm thick BWR plywood and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/ Ebco/ Quba/ Klazovyn) and CP Handle 4\\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 7 | Cabinet door/Shutters made out of 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg. SS Piano higes shall be used for fixing. Lock (Make: Hettich/ Ebco/Quba/ Klazovyn) and CP Handle 4\\" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 8 | Base Frame structure to be made complete with 25mm dia PVC shoes all as specified and as per drg. |
| 9 | HAT STAND WITH MIRROR SMALL AND LARGE (FD-233, FD-362 & FD-361) |
| 10 | In main frame structure, 18mm thick block board duly over which pasting with 4mm thick teak face venner ply, shade approved by EIC/GE with suitable adhesive and all around teak wood beading duly polishedand fixed with headless nails and adhesive all as directed by GE/EIC and as per drg |
| 11 | Brass Pegs as per sample held with BSO |
| 12 | Looking Glass 5mm thick duly polished and fixed as per drg Make : Modiguard/Saint Gobain/Atul |
| 13 | Hanginig Arrangement, 02 Nos MS hanging arrangement to be provided in Hat Stand all as directed by GE/EIC and as per drg. Deco paint to be applied two coats in all matel surfaces. |
| 14 | BIN LINEN MULTIPURPOSE (FD/E6/MAP/09) |
| 15 | Cabinet box complete with vertical and horizontal partitions made of 18mm thick BWR grade plywood over which pasting of sunmica 0.80mm (Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 16 | Cabinet door made out of 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm (Make: Greenply/Archidply/ Century ply) of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg. SS Piano hinges shall be used for fixing. Lock (Make: Hettich/Ebco/Quba/Klazovyn) and SS/CP Handle 4\\" (Make: Hettich/ Ebco/ Quba/ Klazovyn) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 17 | Drawer front side will be made of 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in sides and back shall be of 12mm thick BWR plywood and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/ Ebco/ Quba/ Klazovyn) and SS/CP Handle 4\\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 18 | Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg. |
| 19 | Fancy Knob SS/CP as per sample held in yard. |
| 20 | TABLE WRITING WOODEN (FD-33, DB-3982 OR SIMILAR TYPE) |
| 21 | Top 18mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/ Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make : Rehau/ Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 22 | Legs as per drg. |
| 23 | Foot rest as per drg. |
| 24 | Stiffener side as per drg. |
| 25 | Cabinet box with vertical and horizontal partitions with 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm pasted on exposed view and other side with balancing white sunmica with suitable adhesive of shade approved by EIC/GE all as directed by GE/EIC. Back ply shall be 12 mm BWR grade. |
| 26 | Top and bottom for cabinet box with 18 mm thick BWR grade plywood, over which pasting of sunmica 0.80mm with balancing white sunmica with suitable adhesive of shade approved by EIC/GE all as directed by GE/EIC. Back ply shall be 12 mm BWR grade. |
| 27 | Sides for cabinet box with 18mm thick BWR grade plywood, over which pasting of sunmica 0.80mm with balancing white sunmica with suitable adhesive of shade approved by EIC/GE all as directed by GE/EIC. Back ply shall be 12 mm BWR grade. |
| 28 | Cabinet door made out of 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm pasted on exposed view and other side with balancing white sunmica with suitable adhesive of shade approved by EIC/GE and drg. Lock (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" (Make: Hettich/ Ebco/ Quba/ Klazovyn) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 29 | Back ply BWR grade as per drg. |
| 30 | Drawer front side will be made of 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in sides and back shall be of 12mm thick BWR plywood and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/ Ebco/ Quba/ Klazovyn) and SS/CP Handle 4\\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 31 | Wooden corners to be provided all as spefcified and as directed by EIC/GE. |
| 32 | BOOK CASE WOODEN (FD-237, FD-355 OR SIMILAR TYPE) |
| 33 | Cabinet door with SS/CP fancy knob (Sample kept in BSO yard) made 1st class teak wood. SS Piano hinges shall be used for fixing all as directed by GE/EIC. |
| 34 | Top/bottom/side/back/partition made of 1st class teak wood. |
| 35 | Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg. |
| 36 | TABLE BED SIDE (FD-276 & FD-248) |
| 37 | 6 mm thick back ply BWR grade of table bed side as per drg. |
| 38 | Top/bottom/Shelf made out of 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm on both side of shade approved by EIC/GE with suitable adhesive all as directed by GE/EIC and drg. |
| 39 | Sides made out of 18mm thick BWR grade plywood, over which pasting of sunmica 0.80mm on both side (Make: Greenply/Archidply/ Century ply) of shade approved by EIC/GE with suitable adhesive all as directed by GE/EIC and drg. |
| 40 | TABLE DINING 4/6/8 PERSONS (FD-273, FD-30 OR SIMILAR TYPE/MAP DRG) |
| 41 | Top for table dining 6 pers made of 18 mm thick BWR grade plywood Make : Green ply (Gold)/ Century ply bond/Archid ply (gold) duly pasted with 0.8 mm thick sunmica pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex shall be fixed with suitable adhesive and edge banding machine all as per drg and as directed by GE/EIC. |
| 42 | All as per items No 7.01 for 8 Pers. |
| 43 | All as per items No 7.01 for 4 Pers. |
| 44 | Wooden corners to be provided all as spefcified and as directed by EIC/GE. |
| 45 | Long rail for 4 person as per drg |
| 46 | Long rail for 6/8 person as per drg |
| 47 | Short rail for 4 person as per drg |
| 48 | Short rail for 6/8 person as per drg |
| 49 | Legs 4/6/8 person as per drg |
| 50 | Stiffener between long rails as per drg |
| 51 | TABLE 3' X 2' WITH/WITHOUT DRAWER (FD-55, FD-284, FD-283 OR SIMILAR TYPE) |
| 52 | Top 18mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make : Rehau/ Pegasus/ Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 53 | Legs as per drg |
| 54 | Long rail as per drg |
| 55 | Short rail as per drg |
| 56 | Center Stiffener as directed by EIC |
| 57 | Short stiffener as per drg |
| 58 | Drawer front side will be made of 18 mm thick BWR grade plywood Make : Green ply (Gold)/ Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in sides and back shall be of 12mm thick BWR plywood and bottom of drawer shall be 9mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 59 | Fancy Knob SS/CP as per sample held in yard. |
| 60 | Wooden corners to be provided complete all as specified and all as directed by EIC/GE. |
| 61 | TABLE DRESSING LADIES WITH STOOL & CUSHIONED (FD/MAP-II/07) |
| 62 | Cabinet box with partitions with 18 mm thick BWR grade plywood Make : Green ply (Gold)/Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 63 | Top and Bottom with 18 mm thick BWR grade plywood Make : Green ply (Gold)/Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 64 | Shutter with 18 mm thick BWR grade plywood Make : Green ply (Gold)/Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 65 | Sides with 18 mm thick BWR grade plywood Make : Green ply (Gold)/Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 66 | Drawer front side will be made of 18 mm thick BWR grade plywood Make : Green ply (Gold)/Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in sides and back shall be of 12mm thick BWR plywood and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 67 | Frame assembly along with Mirrorr 5mm thick (Make-Modiguard/Atul/Saint Gobain) & 6 mm thick Back ply BWR grade as per drg. |
| 68 | Cushion complete with 40 dennsity PU foam (Make:Sleepwell/ (Primocool)/Komfort Universe (Poly Cool).) with upholstery of tapestry cloth of range not less than Rs. 550/mtr (Sample kept with BSO as approved colour, shade & quality as approved by EIC/GE. as per drg. |
| 69 | 12 mm thick back ply BWR grade of table dressing box as per drg. |
| 70 | Cabinet box for stool dressing with 18 mm thick BWR grade plywood Make : Green ply (Gold)/ Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. |
| 71 | Heavy duty Revolving Nylon double wheels as per drg. |
| 72 | TABLE CENTRE WOODEN (FD-274, FD-235 OR SIMILAR TYPE) |
| 73 | Top 18mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/ Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 74 | Legs as per drg. |
| 75 | Top rail/stiffener as per drg |
| 76 | Bottom rail as per drg. |
| 77 | Top short rail to be provided irrespective of drg. |
| 78 | Stiffener between bottom rail to be provided irrespective of drg. |
| 79 | Wooden corners to be provided all as directed by EIC/GE irrespective of drg. |
| 80 | PEG TABLE (FD-277, FD-384 & DB-3973) |
| 81 | Top 18mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/ Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 82 | Legs as per drg. |
| 83 | Top rail/Bottom Rail rail as per drg irrespective of drg. |
| 84 | Top short rail to be provided irrespective as per drg. |
| 85 | Stiffener between bottom rail to be provided irrespective of drg. |
| 86 | TEAPOY (FD-278, FD-34 & FD-382) |
| 87 | Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/ Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/ Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 88 | Legs as per drg. |
| 89 | Top rail/stiffener as per drg |
| 90 | Bottom rail as per drg. |
| 91 | Top short rail to be provided irrespective of drg. |
| 92 | Stiffener between bottom rail to be provided irrespective of drg. |
| 93 | Wooden corners to be provided all as directed by EIC/GE irrespective of drg. |
| 94 | TABLE 3'X3' WOODEN (FD-88, FD-391 OR SIMILAR TYPE FD-1007) |
| 95 | Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/ Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 96 | Legs as per drg |
| 97 | Long rail as per drg |
| 98 | Short rail as per drg |
| 99 | Center Stiffener as directed by EIC |
| 100 | Short stiffener as per drg |
| 101 | Wooden corners to be provided all as directed by EIC/GE irrespective of drg. |
| 102 | MIRROR DRESSING GENTS (FD/E6/MAP/16) |
| 103 | Looking Mirrorr shall be 5mm thick (Make-Modiguard/Atul/Saint Gobain) & 6 mm thick Back Ply BWR grade fixed inside, the teak wood frame made of 38mmx 25mm section as per drg duly finished with melamine polish to match with table dressing gents. |
| 104 | Cabinet box with 18mm thick BWR grade plywood of grade-A Make : Green ply (Gold)/ Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive and back side deco paint to be applied two coats. SS of Piano hinges for fixing of door and SS of Hasp & staple 4\\" as per sample held in BSO yard be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 105 | Glass shelves of 5mm thickness shall be fixed inside the box with glass holder as per sample held in BSO yard and all as directed by GE/EIC and as per drg. |
| 106 | 12 mm thick back ply BWR grade of table dressing box as per drg. |
| 107 | TABLE DRESSING GENTS (FD-379, FD-230 & FD-31) |
| 108 | Frame assembly along with Mirror 5mm thick (Make-Modiguard/Atul/Saint Gobain) & 6 mm thick Back Ply BWR grade as per drg duly finished with melamine polish to match with table dressing gents. |
| 109 | Cabinet box with 18mm thick BWR grade plywood of grade - A Make : Green ply (Gold)/ Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of shade approved by EIC/GE with suitable adhesive and back side deco paint to be applied two coats .as per sample held in BSO yard be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 110 | Fancy Knob SS/CP as per sample held in yard. |
| 111 | Drawer front side will be made of 18 mm thick BWR grade plywood Make : Green ply (Gold)/Century ply bond/Archid ply (gold) over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in sides and back shall be of 12mm thick BWR plywood and bottom of drawer shall be 9 mm thick BWR Plywood complete as per provided in Drawers all as directed by GE/EIC. |
| 112 | PVC shoe as per sample. |
| 113 | Polishing of under mentioned furniture items will be carried out as follows:-(a) Anti-termite and anti-bug treatment shall be done before polishing the wooden items.(b) M&L for melamine polish high gloss/mate finish with spray machine applying shellac, wood filler,shelar etc after removing of existing polish making surface smooth by sanding and grinding with standard work manship as directed by EIC to the following furniture articles of MES pattern viz F/ DB/ FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/painting will be directed by GE/Engr-in-Charge. (c) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge. All furniture items is to be painted /polished only after making the entire item intact by tightening the joints. (d) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (East) Mathura including BSO's Furniture Yard as directed by GE/ Engineer-in-Charge. |
| 114 | Side BoardFD-26/FD-241 |
| 115 | Bin Linen MultipurposeFD/E6/MAP/09 |
| 116 | Table writingFD-33/FD-275 AND DB-3982 OR Similar type |
| 117 | Book Case WoodenFD-237 |
| 118 | Table Bed SideFD-276/FD-248 |
| 119 | Table Dining 4/6/8 Persons :FD-273/FD-30 OR Similar type |
| 120 | Table 3'X2' with / without DrawerFD-55/FD-284/FD-283 OR Simillar Type |
| 121 | Table Dressing Ladies with stool (MAP)FD/MAP-II/07 |
| 122 | Table Centre woodenFD-274 / FD-235 |
| 123 | Table Dressing Ladies with mirrorFD-32/FD-251 AND DB-3180 |
| 124 | Peg TableFD-277/ FD-384 AND DB-3973 |
| 125 | Teapoy woodenFD-278/ FD-34/FD-382 |
| 126 | Table 3'X3' woodenFD-291 |
| 127 | Repair of under mentioned furniture items will be carried out as follows:-(a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge. All furniture items is to be painted /polished only after making the entire item intact by tightening the joints. Denting work to be done as per standred work manship before painting as directed by GE/EIC.(b) Work will be executed where the furniture exist in different User Units/Md accns of GE (East) Mathura including BSO's Furniture Yard as directed by GE/Engineer-in-Charge.Rack Six Tiers Steel (FD-106, FD-129 AND FD-1038) |
| 128 | S&F Back of Racks as per drg |
| 129 | S&F sides of Rack as per Drg |
| 130 | S&F of Shelves as per Drg |
| 131 | Welding wherever required as directed by Engineer-in-Charge /GE. |
| 132 | Table Office Officer Steel (FD-84/FD-1003 OR similar) |
| 133 | Legs, as per drg |
| 134 | Lock of drawer as per drg (Make : GODREJ/ HETTICH /LINK/ RINOX) |
| 135 | Repairs to Drawer as specified & as directed by GE/Engr-in-Chg. |
| 136 | MS Steel members any as per drg |
| 137 | Welding the joints of legs /square tube as per drg |
| 138 | Top 18mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Archid ply) duly post -formed with 0.6mm thick laminate in colour/shade as approved by EIC/GE with 2mm thick PVC edging of Make : Rehau/ Pegasus/ Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 139 | Chair School with hard board (FD/E6/MAP/05) |
| 140 | One piece seat and back (Make: Blowplast/ Supreme) as per drg. |
| 141 | Hand board of chair made of 18mm thick BWR grade plywood (Make : Greenply/ Archidply/ Century ply) over which pasting of sunmica 0.80mm (Make: Greenply/ Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on all sides of H/B and 6mm half round teakwood beading to be fixed all around the edges of hand board with fevicol and headless nails all as directed by GE/EIC. |
| 142 | Base frame for fixing hand board. |
| 143 | Welding work wherever required as directed by EIC/GE. |
| 144 | TABLE BED SIDE {FD/E6/MAP/15(R)} |
| 145 | Back of 6mm thick ply BWR grade plywood (Make: Greenply/ Archidply/ Century ply) shall be used as per shape and size as per drg. |
| 146 | Top made out of 18mm thick BWR grade plywood (Make: Greenply/ Archidply/ Century ply) over which pasting of sunmica 0.80mm (Make : Greenply/ Archidply/ Century ply) of shade approved including alround the edges by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC. |
| 147 | Sides made out of 18mm thick BWR grade plywood (Make: Greenply/ Archidply/ Century ply) over which pasting of sunmica 0.80mm (Make: Greenply/Archidply /Century ply) of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC. |
| 148 | Drawer Large front side will be made of 18mm thick BWR grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in sides, back and bottom shall be of 12mm thick BWR Plywood complete. Telescopic channel (Make : Hettich/Ebco/Quba) and CP Handle 4\\" (Make: Hettich/Ebco/Quba) be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers. |
| 149 | Drawer Small front side will be made of 18mm thick BWR grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in sides, back and bottom shall be 12mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 4\\" (Make: Hettich/Ebco/Quba) be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers. |
| 150 | Welding work wherever required as directed by EIC. |
| 151 | LOCKER BED SIDE STEEL (FD-1029, FD-257/SKD-562) |
| 152 | CP handels as per drg |
| 153 | S/S Hasp & Staple, rest as per drg |
| 154 | Repairs to door including replacement of hinges |
| 155 | Shutter/door as per drg. |
| 156 | Legs as per drg |
| 157 | CP Conduit pipe as per drg |
| 158 | Shelf as per drg. |
| 159 | Steel 6 lever locks (Make : Rydass/Link/EBCO) as per drg. |
| 160 | Locking arrangement complete including MS bar. |
| 161 | Welding wherever required as directed by E-in-Incharge/GE. |
| 162 | COMPUTER TABLE (FD/E6/MAP/03 OR SIMILAR) |
| 163 | Top of 18 mm thick BWR grade plywood duly pasted with 0.8 mm thick sunmica on top side with suitable adhesive by GE/EIC, 6 mm thick half round teak wood beading shall be used all around the edges with headless SS Nails and fevicol/ adhesive, SS Nut & Bolts shall be used for fixing the top as directed by GE/EIC. |
| 164 | Key board tray shall be of 18 mm thick BWR grade plywood duly pasted with 0.8 mm thick sunmica on top side with suitable adhesive by GE/EIC, 6 mm thick half round teak wood beading shall be used all around the edges with headless SS Nails and fevicol/ adhesive, SS Nut & Bolts shall be used for fixing the top as directed by GE/EIC and as per drg. |
| 165 | Sides shall be of 18 mm thick BWR grade plywood duly pasted with 0.8 mm thick sunmica on top side with suitable adhesive by GE/EIC, 6 mm thick half round teak wood beading shall be used all around the edges with headless SS Nails and fevicol/ adhesive, SS Nut & Bolts shall be used for fixing the top as directed by GE/EIC. |
| 166 | Drawer front side will be made of 18 mm thick BWR grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/ GE with suitable adhesive as approved by EIC/GE in sides and back shall be of 12mm thick BWR plywood and bottom of drawer shall be 9 mm thick BWR Plywood complete. Telescopic channel (Make: Hettich/ Ebco/ Quba/ Klazovyn) and CP Handle 4\\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. |
| 167 | Telescopic channel (Make: Hettich/ Ebco/ Quba/ Klazovyn) and CP Handle 4\\" as per sample held in BSO yard be provided in Drawers and Key board tray all as directed by GE/EIC. |
| 168 | All metal work shall be epoxy powder coating after applying metalic putty and preparation of surface smooth. |
| 169 | PVC Shoes best quality |
| 170 | Welding wherever required as directed by Engr-in-Charge |
| 171 | Table 3'x2' with and without drawer & Table 3'x3' Steel (FD-1008, FD-1007/FD-1009) |
| 172 | Welding wherever required as directed by Engr-in-Charge |
| 173 | Top 18mm thick of size 3'x2' made of 18 mm thick plywood, BWR grade Make : Greenply/ Archidply/ Centuryply (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.8mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make : Rehau/ Pegasus/ Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 174 | Top 18 mm thick of size 3'x3' made of 18 mm thick plywood, BWR grade Make : Greenply/ Archidply/ Centuryply (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.8 mm thick laminate in colour/shade as approved by EIC/GE with 2mm thick PVC edging of Make-Rehau/ Pegasus/ Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 175 | Repairs to Drawer by replacing old u/s parts with new parts and providing roller bearing including tinkering/denting, welding, etc. all as per drg & specified & as directed by Engr-in-Chg. |
| 176 | Lock of drawer as per drg (Make : Rydass /Link/ EBCO). |
| 177 | MS section any member as per drawing. |
| 178 | ALMIRAH LARGE STEEL (FD-67, FD-1031, TP/MAP OR SIMILAR TYPE) |
| 179 | Steel 6 lever locks (Make : Rydass/Link/EBCO) as per drg |
| 180 | CP Handle as per drg. |
| 181 | Legs as per drg. |
| 182 | Repairs to door as specified including replacement of hinges |
| 183 | Repair/adjustment to existing shelves including welding as per drg. |
| 184 | Shutter as per drg. |
| 185 | Shelf as per drg |
| 186 | Locking arrangement complete including MS bar. |
| 187 | Welding wherever required as directed by GE/EIC |
| 188 | TEAPOY VERANDAH (O) MAP (FD/E6/MAP/17) |
| 189 | Top made out of 18mm thick BWR grade plywood (Make : Greenply/ Archidply/ Century ply) over which pasting of sunmica 0.80mm (Make : Greenply /Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC. |
| 190 | MS pipe any as per drg. |
| 191 | MS Bar Mesh as per drg. |
| 192 | Welding work wherever required as directed by GE/EIC. |
| 193 | TABLE OFFICE CLERK STEEL (FD-84 /FD-381 FD-1004/FD-184) |
| 194 | Legs, as per drg. |
| 195 | Lock of drawer as per drg (Make : Rydass/ Link/EBCO). |
| 196 | Repairs to Draweras specified & as directed by GE/Engr-in-Chg and as per drg. |
| 197 | MS conduite any as per drg. |
| 198 | Welding the joints of legs/square tube as per drg. |
| 199 | Top 18mm thick BWR grade plywood (Make : Kitply (Gold)/ Century (Bond) / Archid ply (Gold) duly pasted with 0.8 mm thick sunmica Make:- Archid ply/Merino ply/Century ply on top side with suitable adhesive by GE/EIC, 6 mm thick half round teak wood beading shall be used all around the edges with headless SS Nails and fevicol/ adhesive, SS Nut & Bolts shall be used for fixing the top all as directed by GE/EIC. Rest as per drg, all as directed by GE/EIC. |
| 200 | ALMIRAH MEDIUM/SMALL STEEL {FD-1032 /FD-104(M)} |
| 201 | Steel 6 lever locks (Make : Rydass/Link/EBCO) as per drg |
| 202 | CP Handle as per drg |
| 203 | Legs as per drg |
| 204 | Repairs to door as specified including replacement of hinges |
| 205 | Repair/adjustment to existing shelve including welding as per drg |
| 206 | Shutter as per drg. |
| 207 | Shelve as per drg |
| 208 | Locking arrangement complete including MS bar. |
| 209 | Welding wherever required as directed by GE/E-in-Incharge |
| 210 | BOOK CASE STEEL ANY TYPES (FD-1028 OR SIMILAR TYPE) |
| 211 | Steel 6 lever locks (Make : Rydass/Link/EBCO) as per drg |
| 212 | CP Handle as per drg |
| 213 | Glass of shutter including fixing as per drg |
| 214 | Repair/adjustment to existing shelf as per drg |
| 215 | Shutter as per drg. |
| 216 | Shelf as per drg |
| 217 | Welding wherever required as directed by GE/E-in-Incharge. |
| 218 | TABLE CENTRE GLASS TOP (FD-375 OR SIMILAR TYPE) |
| 219 | Table top glass colour and shade as per directed by GE/EIC as per drg |
| 220 | Polishing ,welding and vacume all as per directed by GE/EIC |
| 221 | Best quality Shoe of 25 mm dia as per sample held in BSO Yard |
| 222 | Shoes Rack Steel {FD/E6/MAP/02(R)} |
| 223 | Replacement of worn out US pipe from the level of bottom gas & fixing of new pipe through welding to the height of 6\\" from ground level gas welding all as specified on drg and all as directed by GE/E-in-C. |
| 224 | MS Bar Mesh duly fixed with Gas welding as per drg and all as directed by GE/E-in-Incharge. |
| 225 | PVC Shoes for Serial No. 2.00, 4.00, 7.00, 10.00 & 14.00 best quality all as per drg, as directed by GE/EIC. |
| 226 | Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule. Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing every part in-tact including polishing/ painting the entire article with standard work manship and as directed by GE/Engr-in-Charge. All furniture items is to be painted /polished only after making the entire item intact by tightening the joints. Denting work to be done as per standred workmanship before painting as directed by GE/EIC.(a) M&L for painting two coat of hammer Tone Synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge/GE. |
| 227 | Rack steel any type |
| 228 | Table office officer steel |
| 229 | Chair School with Hand board |
| 230 | Table Bed Side (MAP) |
| 231 | Locker bed side Steel |
| 232 | Computer Table |
| 233 | Table 3' x 2' with and w/o drawer & Table 3'x3' steel |
| 234 | Almirah Large Steel |
| 235 | Teapoy Verandah (O) |
| 236 | Table office Clark steel |
| 237 | Almirah Steel Medium/Small |
| 238 | Book case steel |
| 239 | Shoes Rack steel |
| 240 | Trestle store room Iron |
| 241 | Repair of under mentioned furniture items will be carried out as follows:-(a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints.(b) Work will be executed where the furniture exist in different User Units/MD accns of GE (East) Mathura including BSO's Furniture Yard as directed by Engineer-in-Charge.(c) All Timber shall be of 1st class seasoned hard teak wood free from knots and cracks else specified in drg.(d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items.(e) M&L for melamine polish high gloss mate finesh with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing will be directed by GE/Engr-in-Charge.SOFA SET 5/4 SEATER |
| 242 | Legs/side rails as drg |
| 243 | Arms as per drg |
| 244 | Front rails/back rail for Three Seater as per drg |
| 245 | Front rails/back rail for One Seater as per drg |
| 246 | Bearer/Batten as drg |
| 247 | Back frame top/bottom for Three Seater as per drg |
| 248 | Back frame top/bottom/sides for One Seater as per drg |
| 249 | PVC shoe as per sample. |
| 250 | Cushion complete with 40 dennsity PU foam of size 22”X21”X110mm {Make : Sleepwell/ (Primocool) /Komfort Universe (Poly Cool)} with upholstery of tapestry cloth of range not less than Rs. 550/mtr (Sample kept with BSO as approved colur, shade & quality and providing a chain best quality (at either of 21\\" side) of Make : YKK or approved quality with two runners at both ends as approved by EIC/GE. |
| 251 | Cushion cover of tapestry cloth of range not less than Rs. 550/mtr (Sample Kept in BSO) of approved colour, Shade and quality quality and providing a chain best quality (at either of 21\\" side) of make YKK with two runners at both ends as approved by EIC/GE. |
| 252 | Sofa Set 5 seater (Any type) : TPTaking down old cushion and tapestry/rexene and re-upholstery of Sofa complete by tightening of frame by removal of unservicable parts i.e. legs/spring/living cloth/elastic & weldings with new one and S&F new cushion 40 density of required size of make : Sleepwell/ (Primocool)/ Komfort Universe (Poly Cool) tapestry cloth /Rexine of superior quality as approved by GE/EIC (Sample Kept in BSO Yard) of rate not less then Rs 800/ RM all as specified). |
| 253 | Desk with two seats (FD-DS) |
| 254 | Legs of Desks as per drg |
| 255 | Side stiffeners for desks/Bench as per drg |
| 256 | Centre Stiffeners for Desk/Bench as per drg |
| 257 | MS tray for desk as per drg |
| 258 | Legs of Bench as per drg |
| 259 | Back support stiffners of bench as per shape shown in drg |
| 260 | Top for Desk made of 18 mm thick BWR grade plywood (Make :- Greenply/ Archidply/ Centuryply/ Kitply) duly pasted with 0.8 mm thick sunmica of make : (Make: Greenply/ Archidply/ Centuryply/ Kitply) pasted on both side with suitable adhesive all as directed by GE/EIC. SS Nut& bolts shall be used for fixing top all as directed by GE/EIC.Hard wood beading half round to be provided with headless nails and fevicol on exposed edges, Cutting of ply fixining of ply to the frame and pasting of Mica to be done at BSO yard as directed by GE/EIC. |
| 261 | Both Side of desk : Ditto all as top for desk as per drg |
| 262 | Front Side of desk : Ditto all as per Ser No 36.07 as per drg |
| 263 | Seat for bench : Ditto all as per ser No 36.07 |
| 264 | Back supports for bench : Ditto all as per ser No 36.07 |
| 265 | Hard rubber shoes as per sample all as directed by GE/EIC. |
| 266 | Welding work wherever required as directed by GE/EIC |
| 267 | Fixing of PVC cap in upper portion of MS Pipe of seat. |
| 268 | Removal of old paint by scrapping and prepration of surface smooth by filling putty and applying two coats of synthetic enamel paint 1st quality of approved shade over a coat of red oxide primer all as specified and directed. |
| 269 | (a) Anti-termite and anti-bug treatment shall be done before polishing the wooden items.(b) M&L for melamine polish high gloss mate finesh with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing will be directed by GE/Engr-in-Charge.(c) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule. Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/ Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. |
| 270 | Sofa Set 5 Seater |
| 271 | Sofa Set 4 Seater Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender