Tender For Special Repairs To Building No. P-42 Of 3 Administrative & Training Regiment In Wing - I At Arty Centre, Nasik Road C
Tender Value
71.56 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
10 days left
EMD
1.33 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Building No. P-42 Of 3 Administrative & Training Regiment In Wing - I At Arty Centre, Nasik Road C
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but including ashlar facings, dressed stone work and precast concrete articles all as specified |
| 2 | M & L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks all as specified |
| 3 | M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks all as specified. |
| 4 | Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land all as specified |
| 5 | M&L for rendering 5 mm thick (1: 3) on fair faces of concrete surfaces complete all as specified and directed. |
| 6 | M&L for rendering 15 mm thick on stone surfaces or other than fair faces of brick work or concrete surfaces in CM 1:4, rendering is to be finished even and smooth without using extra cement adding water proofing compound 3% by weight of cement (water proofing compound shall be measured and paid separately) |
| 7 | M&L for rendering 15 mm thick (1: 6) on stone masonry or surfaces fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement all as specified |
| 8 | Supply only integral water proofing compound |
| 9 | M&L Preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces all as directed |
| 10 | M & L for preparing old decorated surfaces and applying two coat of white wash on surface of ceilings all as specified |
| 11 | M & L for Complete removal of existing treatment and priming with alkali resistant primer coat as prepartory to applying two coats of OBD, white or tinted on walls all as specified and directed. |
| 12 | M&L for preparing plastered surfaces and applying two coats of oil bound distemper over one coat of primer including preparatory work complete all as specified and directed by Engr-in-Charge. |
| 13 | M & L for applying 2 mm avg thick Birla white putty incl necessary repair complete all as specified and directed by Engr-in-Charge. |
| 14 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 15 | M & L for Complete removal of existing treatment and applying two coat of Acrylic weather proof exterior paint over water based primer (Make: APEX of Asian Paint or equivalent) complete all as specified and directed. |
| 16 | S & F in repairs looking mirror of selected quality glass, mounted on 450mmx600mmx8mm thick AC building board or commercial plywood including aluminium beading ( heavy section) all around and size of mirror with chromium plated brass screws and cup washers as specified and directed by Engineer-in-Charge |
| 17 | M & L for special treatment to sunken portion with the following :-(a) Clean the sunken portion of toilet/Bath/WC/Kitchen throughly to remove laitance, dirt, dust, etc.(b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (\\"Dr Fixit\\" Pidicrete URP\\" or eqvt)(c) Sanitary pipes entering through walls and floor shall be sealed with \\"Dr Fixit Bathseal Tape\\" and the gaps to be grouted with non-shrink cementitous grout \\"Dr Fixit Bathseal Grout\\" or eqvt. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner.(d) Apply one coat of a Bitumen-modified polymer coating \\"Dr Fixit Bathseal Plus\\" or eqvt on all angle fillets by brush and cover it with 100 mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.(e) In the remaining area, in dry sustrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150 mm above the FFL. Above FFL, another cementitious waterproof coating \\"Dr Fixit Pidifin 2 K\\" or eqvt can be further applied right upto 2.1 mm to waterproof the shower area also, it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.(f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with intergral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2.(g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready-to -make Tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc. Tile to be measured separatly |
| 18 | S&F in repairs Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified |
| 19 | S&F of PVC(SWR) 'P' trap of 125/110 mm bore all as specified |
| 20 | Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises all as specified. |
| 21 | M&L for 10 mm thick rendering in CM 1:4 on brick masonary or concrete rough finished surfaces as backing coat all as specified |
| 22 | M&L for coloured glazed ceramic tiles 300 x 450 x 7-8mm thick in vertical surface, set and jointed in neat cement slurry & pointed with white or coloured cement to match all as specified |
| 23 | M & L for 15mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floors finishes all as specified |
| 24 | M & L for 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floors finishes all as specified |
| 25 | M&L non-skid coloured ceramic tiles 7 to 8mm thick square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile all as specified and directed by Engr-in-charge |
| 26 | M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate)as in sub base to flooring finished even and fair without using of extra cement all as directed. |
| 27 | Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed |
| 28 | M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with gray cement slurry with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 29 | M&L for machine cut kota stone slab 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. Note : cement motar screed bed layer shall be measured and paid seperately under the relevat item here in before. |
| 30 | S&F in repairs bib taps standard of PTMT 15mm bore dia any colour high presure screwed for iron pipe of Approved Brand fixed (minimum weight 90 gms) complete all as specified and directed |
| 31 | S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level white, with inlet, ball valve, float and handle including brackets of 10 ltrs inclluding flush pipe of polyethelene of low or high dencity or PVC, 32 mm dia all as specified and direcetd. |
| 32 | S & F PVC connections 15mm size with PTMT nuts of length 450mm all as specified. |
| 33 | S &F in repairs Vitreous china bowl urinal flat back, size of 465x355x265 white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified |
| 34 | S&F 40mm size waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified |
| 35 | S&F waste coupling of PTMT (half or full threaded), 32 mm bore dia (Min weight 45 gms) (half or full threaded) suitable for urinals all as specified |
| 36 | S&F in repair stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed |
| 37 | S&F in repairs homemade single bowl Stainless steel kitchen sink 1.0 mm thick sheet for kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and conecting union to pipe, bowl size 600mmx450mmx250mm all as specified and directed |
| 38 | S&F in repairs Angle cock 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes all as specified |
| 39 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)complete all as specified and directed |
| 40 | S&F in repair swivel shower of PTMT any colour for fixing with 15mm pipe complete all as specified and directed |
| 41 | S & F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed |
| 42 | S & F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 43 | S & F in repairs soap dish any type, approximate size 160x 160x90mm ,fixed to plugs with choromium plated brass screws complete all as specified and directed |
| 44 | Taking up or down 15 mm dia tubes galvanized iron and connections and fittings or removal from site as including cleaning for refixing where directed complete all as specified and directed. |
| 45 | Taking up or down 20 mm dia tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed. |
| 46 | Taking up or down 25 mm dia tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed. |
| 47 | Re-fixing only 15 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed |
| 48 | Re-fixing only 20 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed |
| 49 | Re-fixing only 25 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed |
| 50 | S&F 15 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed |
| 51 | S&F 20 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed |
| 52 | S&F 25 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed |
| 53 | Taking down PVC pipe any type, 75 mm dia incl all fittings complete all as specified and directed. |
| 54 | Taking down PVC pipe any type, 110 mm dia incl all fittings complete all as specified and directed. |
| 55 | S&F 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 56 | S&F 110 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 57 | S&F 75 mm dia PVC(SWR) bends of any radius complete all as specified and directed. |
| 58 | S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed. |
| 59 | S&F 75 mm dia PVC(SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 60 | S&F 110 mm dia PVC(SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 61 | S&F 75 mm dia PVC(SWR) junction single, (single T), equal or unequal complete all as specified and directed. |
| 62 | S&F110 mm dia PVC(SWR) junction single, (single T), equal or unequal complete all as specified and directed. |
| 63 | S&F 110 mm dia PVC(SWR) Vent cowl complete all as specified and directed. |
| 64 | S&F 50mm dia low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls as directed by Engr-In-Charge |
| 65 | Taking down of shutters of any description exc 1.00 sqm and n.exc 2 sqm each shutter complete all as specified and directed |
| 66 | Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each. |
| 67 | Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4 sqm each. |
| 68 | Taking down PVC chowkat or frames with PVC shutters (without taking off shutters from the frame not exc. 1.5 Sqm each. |
| 69 | Supply & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 70 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 71 | S&F stainless steel barrel tower bolt 150 mm long all as specified |
| 72 | S&F stainless steel 150 mm handles all as specified |
| 73 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed to walls complete all as specified and directed. |
| 74 | S&F 2nd class hard wood factory made Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats. |
| 75 | S&F 2nd class HW 35mm thick plain framed factory made panelled shutters (two panel) with lock rail, panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) Kiln, Seasoned and chemically pressure treated all as specified |
| 76 | M&L for preparation of new wooden surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified |
| 77 | M&L for preparation of old wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint all as specified |
| 78 | S&F aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy and fixed all as specified |
| 79 | S&F Aluminium alloy anodised barrel tower bolts 200 mm long all as specified |
| 80 | S&F SS butt hinges 100mm size medium weight complete all as specified and directed |
| 81 | S&F 150 mm extruded aluminium alloy handles all as specified |
| 82 | S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat, Glazing clips, neoprene, rubber packing for fixing etc. complete all as specified and directed by Engr in Charge |
| 83 | S&F anodised powder coated aluminium Window/ventilators shutters, sliding type without sash, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, screws, suitable handles and suitable locking arrangement, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge |
| 84 | S&F Sheet glass ordinary quality 4.0 mm thick n.exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed |
| 85 | S & F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples all as specified |
| 86 | Dismantling water tanks of size exc 500Ltrs but n. exc 1000Ltr and removing to store all as specified |
| 87 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Tanks all as specified |
| 88 | S&F 25mm bore dia Nipple suitable for HDPE water tank (Minimum weight 25mm- 65gms) all as specified |
| 89 | S&F 25mm bore dia Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed all as specified |
| 90 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified |
| 91 | Moulding to granite (single or double) slab including rounding off edges for 18 to 20 mm thick slabs including grinding and polishing all as specified |
| 92 | Demolition of cement concrete concrete (un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified |
| 93 | M&L for 75mm thick PCC 1:3:6 type C1 ( using 20mm graded stone aggregates) as in plinth protection finished even and fair without using extra cement all as specified. |
| 94 | S&F in repairs tubular rail curtain rod/towel rail, 20mm dia, brass chromium plated complete all as specified and directed |
| 95 | S&F in repairs for brass chromium plated brackets for 20mm dia tubular curtain rod/towel rail complete all as specified and directed |
| 96 | S&F in repairs Gun metal, globe or gate valves, with iron wheel head, screwed both ends for 32mm bore iron pipe and fixed. |
| 97 | M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directed. |
| 98 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings, switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB) removing materials to store and making good to disturb surfaces of wall/floors etc as specified & directed. |
| 99 | Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) of adequate size and its accessories with PVC boxes of adequate size, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:-(a) One light point and one fan point controlled by one, one way swtich. |
| 100 | (b) All as per ser item No. 99 here in before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified. |
| 101 | (c) All as per ser item No. 99 here in before but on independent board all as specified. |
| 102 | (d) All as per ser item No. 99 here in before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes all as specified. |
| 103 | (e) All as per ser item No. 99 here in before but one light point controlled by 2 way switches all as specified. |
| 104 | (f) All as per ser item No. 99 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent all as specified. |
| 105 | Taking down carefully ceiling/ exhaust fan, sealing cable end dismantling blades and removing fan and blades to store for safe custody for re-fixing after completion of B/R nature work all as specified. |
| 106 | M&L for painting of ceiling fan and exhaust fan complete in site with synthetic enamel paint by spray painting including filling cavities with filter, one coat after cleaning of dust etc all as specified |
| 107 | Hanging only ceiling fan and connecting up including connecting of cable from ceiling rose to ceiling fan all as specified. |
| 108 | Fixing only exhaust fan and connecting up including connecting of cable from ceiling rose to exhaust fan all as specified. |
| 109 | Supply and fixing of switch modular type 6 Amps one way, 1 module, AC 230 Volts, shrouded terminal, ISI marked complete all as specified and directed. |
| 110 | Supply and fixing of modular type socket 6 Amps 3 pin round socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed. |
| 111 | Supply and fixing of switch modular type 16 Amps one way, 1 module, AC 230 Volts, LED based indicator, shrouded terminal, ISI marked complete all as specified and directed. |
| 112 | Supply and fixing of modular type socket 6 Amps/ 16 Amp 3 pin socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed. |
| 113 | Supply and fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 114 | Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish. Make - Havells /Anchor / Legrand. |
| 115 | Supply and fixing of switch modular type bell push 6 Amps 1 module, AC 230 Volts, LED based indicator, laser marking, ISI marked complete all as specified and directed. |
| 116 | Supply and fixing of switch modular type 6 Amps two way, 1 module, AC 230 Volts, ISI marked complete all as specified and directed. |
| 117 | Supply and fixing of modular type fan 8 step regulator, 100 watt, AC 230 Volts, 2 module, laser marking complete all as specified and directed. |
| 118 | Supply and fixing of LED 20 Watt LED batten with rod complete with polycarbonate body mounted on clamp of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified. |
| 119 | Supply and fixing of LED 10 Watt LED batten with rod complete with polycarbonate body mounted on clamp of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified. |
| 120 | Supply and fixing in replacement of bell, AC, 230 volts, single phase complete all as specified and directed. Make -Legrand/ Havells/ Anchor. |
| 121 | Supply and fixing in replacement of sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified. Make- L&T/ ABB/ Legrand/ Schenider. |
| 122 | Supply and fixing in replacement of sheet metal enclosures with plug socket triple pole and earth enclosure with three pin and earth plug with socket, 415 volts complete with one MCB of 32 Amps (TP) complete all as specified. Make- L&T/ ABB/ Legrand/ Schenider. |
| 123 | Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty surface casing caping including 10 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Four runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc. |
| 124 | Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Four runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc. |
| 125 | Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. |
| 126 | Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No 125 to 126 :- (i) Two runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc. |
| 127 | Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 4 way with 200 Amps rated busbar all as specified and directed. |
| 128 | Supply and fixing in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed. |
| 129 | Supply and fixing in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed. Make - Hager CP No VYS08D or Legrand/ ABB. |
| 130 | Supply and fixing in replacement 3 Pole MCCB 125 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 25 KA. Make - Hager CP No HHA126U or Schnider/ Legrand. |
| 131 | Supply and fixing in replacement MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KA all as specified.Make - Hager of CP No NBN463N or Legrand /ABB. |
| 132 | Supply and fixing in replacement of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA all as specified.Make - Hager CP No NBN232N or Legrand/ ABB. |
| 133 | Supply and fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA all as specified.Make - Hager CP No NBN132N or Legrand/ ABB. |
| 134 | Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion. |
| 135 | Supply and fixing in replacement of 35 Watt LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with bracket of adequate size complte IP66 protection and impact resistance of IK08.E68 , including coneecting up with 2/3 core flexible coppper conductor cable, compete all as specified and directed by Engr-in-Charge. |
| 136 | Supply and fixing in replacement of LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with battery backup and tri-colour CCT with remote control, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified |
| 137 | Supply and fixing in replacement of LED bulkhead 10 watt 220 volts AC with high efficacy PMMA diffuser soft glare free light complete with drivers, clamps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified. Make : CP No HLBH-15-10-CW-INV Halonix/ Philips/ Crompton/ Bajaj Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender