Tender For Repairs To Fencing & Compound Wall & Camouflage Painting At Tech Area At 25 Ed Airforce Station Under Ge (Af) Ojhar.
Tender Value
47 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
6 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Fencing & Compound Wall & Camouflage Painting At Tech Area At 25 Ed Airforce Station Under Ge (Af) Ojhar.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of debris outside MoD land and depositing where directed. |
| 2 | Demolition of reinforced cement concrete in any description and in any location (reinforcement cut as required to facilitate demolition) including removing of debris to a distance not exc 50 m and depositing where directed. |
| 3 | Demolition of brickwork , block masonry or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris as ordered outside MD land complete all as directed. |
| 4 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as directed. |
| 5 | Dismantling of fencing wire mesh any type complete all as specified. |
| 6 | Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MD land complete all as directed. |
| 7 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in soft/ loose soil. |
| 8 | Removing excavated material to a distance exc. 250m but not exc. 500m and depositing where directed complete all as specified. |
| 9 | M & L for PCC 1:4:8, type D2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete complete all as specified and directed |
| 10 | Providing precast ce- ment concrete Type B1 1:2 :4 using 20 mm graded crushed stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts , boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match Set in cement mortar 1:4 complete all as directed. |
| 11 | M&L for brick work with old size factory moulded Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, having compressive strength 7.5 N/mm² (Avg) & water absorption less than 20% built in cement mortar 1:4 complete all as specified. |
| 12 | M&L for broken glass coping on top of walls in cement mortar 1:3including taking down old broken glass coping complete all as specified & as directed. |
| 13 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 complete all as specified & as directed. |
| 14 | M&L for making full moulding to 18 -20 mm thick Granite stone slab on the edge including machine polishing to edge to give high glaossy finish etc complete to the satisfaction of Engineer-in-charge . |
| 15 | S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed. |
| 16 | S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, conforming to Grade E-165 (Fe 290), complete all as specified & as directed |
| 17 | S&F mild steel screw bolts of 11-15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm but not exceeding 10 cm long complete all as specified. Please Enable Macros to View BoQ information |
| 18 | S&F mild steel screw bolts of 11-15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm but not exceeding 10 cm long complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender