Tender For Repair To Certain Steel Furniture At Mil Stn Shahjahanpur Cantt Under Ge (East) Bareilly
Tender Value
49 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
11 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shahjahanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain Steel Furniture At Mil Stn Shahjahanpur Cantt Under Ge (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: REPAIR TO CERTAIN STEEL FURNITURE AT MIL STN SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY Contract No : CWE / BLY / GE(E) /71 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | FD-190(M) Book Case Steel : S&F in repairs lock 65mm brass, 6 lever, Godrej pattern, inside with steel body/box and keys in duplicate for book case steel complete all as specified and directed. |
| 3 | S&F in repairs mild steel cromium plated handle 100 mm long bow type for book case steel complete all as specified and directed. |
| 4 | S&F in repairs 3 mm thick, ordinary quality, plain glass pane, for book case steel complete all as specified and directed. |
| 5 | FD-1003 Table Office Offrs steel : Taking down old unserviceable top of table office officers steel and S&F new top of table made out of 18 mm thick prelaminted particle board one side teak face and other side white shade exterior grade ISI marked with 4 mm wood beading duly polished alround top complete all as specified and directed. |
| 6 | Removing old unserviceable drawers and replacing the same with new steel drawer made out 1 mm thick mild steel sheet and duly painted with two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed. |
| 7 | Repair to drawer of table office offrs steel by straightening of dented portion and smooth runing by greasing complete all as specified and directed. |
| 8 | All as per ser item No. 1 here in before but lock of drawer of table office officer steel complete as shown in drg complete all as specified and directed. |
| 9 | FD-381/1004/84 Table Office Clerk Steel : All as per ser item No. 4here in before but top for table office clerk steel complete as shown in drg complete all as specified and directed. |
| 10 | All as per ser item No. 5 here in before but drawer of table office clerk steel complete as shown in drg complete all as specified and directed. |
| 11 | All as per ser item No. 6 here in before but drawer of table office clerk steel complete as shown in drg complete all as specified and directed. |
| 12 | All as per ser item No. 1 here in before but lock of drawer of table office clerk steel complete as shown in drg complete all as specified and directed. |
| 13 | FD-1009 Table 3 x 3 Steel : All as per item No. 4 above but top for table 3 x 3 steel as shown on drg and directed. |
| 14 | FD/E6/ MAP/17 Teapoy Verandah Map : All as per item No. 12 here in before but top for teapoy verandah complete all as shown in drg and directed. |
| 15 | FD-165 Table Dining ORs Aluminium Top : Dismantling of old top of table dining OR and S&F new table top made out of 18 mm thick, commercial face block board, exterior grade duly lined on top with 0.65 mm thick aluminium anodised sheet fixed with appropriate size of aluminium nails complete all as specified and directed. |
| 16 | FD-1032 Almirah Steel Medium/Large/ Map : All as per item No. 1 here in before but lock for almirah steel medium/large/MAP compplete all as specified and directed. |
| 17 | S&F repair handle of cast iron CP 125 mm long to almirah medium/large steel complete all as specified and directed. |
| 18 | Repair to shutter of almirah medium/large steel/locker bed side by straightening of dented portion and by replacing the broken butt hinges complete all as specified and directed. |
| 19 | S&F in repair MS cleats of 25mm x 3mm by welding to support the shelf and straightening for dent portion of shelf if any complete all as specified and directed. Note : Replacing of four cleats shall be measured and paid as one unit. |
| 20 | S&F in repairs shelves of almirah large steel made out of 1mm thick MS sheet duly painted with two coat of enameled paint over a coat of red oxide primer as shown in drg complete all as specified and directed. |
| 21 | All as per item No 19 above but shelf for almirah medium steel complete all as specified and directed. |
| 22 | S&F in repairs of legs to almirah large, med/side locker made out of 1 mm thick MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown in drg and directed. |
| 23 | FD/E6/08/MAP Bed Hard Steel with Ply Top :- Removing old u/s top and S&F new top of plywood top 12mm thick BWR Grade ISI Marked confirming to IS-303 of Bed plywood or its approved equivalent complete all as specified and directed. |
| 24 | Removing old u/s headrest and S&F new headrest made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I of shade as approved by GE. all as directed by GE and shown on drawing. |
| 25 | Removing old u/s footrest and S&F new footrest footrest made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I of shade as approved by GE. all as directed by GE and shown on drawing including dismatling of old unserviceable top without disturbing the othe parts. |
| 26 | FD/E6/MAP/12 Chair Writing MAP : Removing faded colour of seat and back from chair writing MAP and S&F new upholstry duly stiched and with PVC lipping all around and rubber complete all as specified and directed. Note : Colour of upholstry shall be approved by GE. Minor repair shall be carried out without any extra cost. Rate shall be deemed with upholstry work complete all as shown in drg and directed. cost of upholstry shall not be less than Rs 300/-Sqm. |
| 27 | S&F in repair handle black integral polythene reinforced with MS insert, screch and weather resistant to chair writing MAP as shown in drg complete all as specified and directed. |
| 28 | FD/E6/MAP/01/ TP Chair Computer /Revolving : All as per item No. 25 here in before but upholstry of seat and back for chair computer as shown in drg complete all as specified and directed. |
| 29 | All as Ser item No 26 here in before but handle for chair computer as shown in drg complete all as specified and directed. |
| 30 | S&F in repair pedstal assembly of chair computer with twin wheel castors set of five as shown in drg complete all as specified and directed. Pedestal assembely with twin wheel castors set of five will be steel. |
| 31 | S&F in reapir of hydrolic assembly of chair computer as shown in drg complete all as specified and directed. |
| 32 | FD-1029 Locker bed side steel /SKD : Dismantling old unserviceable single door leaf and provn of new front door made of 1 mm thick MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and providing CP handle and hasp and staple as shown in drg complete all as specified and directed. |
| 33 | S&F in repair of MS CP handle 125mm long as shown in drg complete all as specified and directed. |
| 34 | S&F in repair hasp and staple 75mm MS,chromium plated as shown in drg complete all as specified and directed. |
| 35 | S&F in repairs of legs to locker bed side steel/SKD made out of 1 mm thick MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown in drg and directed. |
| 36 | FD/E6/MAP/15 TABLE BED SIDE MAP STEEL : Removing old u/s top and S&F new Top made of 18/19mm thick prelaminated particle board exterior grade with 4 mm teak wood beading alround the top complete all as specified, directed and shown on drawing. |
| 37 | Removing old u/s top drawer and S&F new Top drawer made of 18/19 mm thick prelaminated particle board exterior grade with 4 mm teak wood beading alround the top complete all as specified, directed and shown on drawing. |
| 38 | All as per item No 36 above but bottom drawer of table bed side steel complete all as specified and directed shown on drawing. |
| 39 | Removing old u/s side and S&F new Side made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I of shade as approved by GE. |
| 40 | FD-75 Chair CB steel with or with out Arms : Taking down existing old unserviceable seat of chair and S&F new seat duly polished with one coat black polish and canned as godrej pattern with 2mm wide with 4mm border seat to fixed with required screws and four numbers of rubber shoe at bottom of frame shall be provided where ever required. frame of chair shall be painted a coat of synthetic enamel before fixing of seat in drg complete all as specified and directed. |
| 41 | All as per item No 39 above but back of chair CB steel with arm and rubber cap on top of frame of the chair shall be provided where ever required all as shown in drg complete all as specified and directed. |
| 42 | Taking down old unserviceable arm of chair CB steel and S&F new wooden handle arm to chair CB steel duly painted black polish all as shown in drg complete all as specified and directed. |
| 43 | S&F flat iron stiffner 25mm x 535mm x 3mm thick shall be welding at bottom of seat/top of back for chair CB steel with or without arm duly painted black enamel paint all as shown in drg complete all as specified and directed. |
| 44 | FD/E6 MAP-05 Chair School with Hand Rest : Taking down PVC seat and back from chair school S&F new PVC seat and back blow pastic with appropriate size of screws as shown on drg complete all as specified and directed. |
| 45 | Taking down old unservicable hand board from chair school and S&F new hand board made out of 19mm thick prelaminated particle board with rubber beading alround the hand board and Iromn clamp shape and size as shown in drg complete all as specified and directed. |
| 46 | Steel Furniture : M&L for spot/tack welding in repair n.exc2.5cmto steel articles thickness not exceeding 6mm complete all as specified and directed. Note : One unit calculated up to 25mm. |
| 47 | FD-220 GI Charpoy : Removing of unserviceable long rail having both threaded ends broken and S & F new long rail of GI tubing 32mm bore medium grade duly threaded both ends complete all as specified and as directed. |
| 48 | Removing of unserviceable short rail having both threaded ends broken and fixing of two Nos short rails made from cutting of long rail obtained from item No 46 above threading the both ends of short rails and fixing in position complete all as specified and directed. |
| 49 | Removing of unserviceable legs, threading and fixing legs made from cutting of short rails obtained from items No 138 above and fixing in position complete all as specified and directed. |
| 50 | Removing of existing cracked deshaped or unserviceable elbow and S&F new 32mm bore GI Elbow (ISI Mark) three way complete all as specified and directed. |
| 51 | Removing of existing cracked deshaped or unserviceable check nut and S&F new 32mm bore GI check nut (thickness of check nut shall not be less than 6mm) ISI Marked complete all as specified and directed. |
| 52 | Removing of old unserviceable ply top from charpoy GI Pipe, tightening of loose all components (ie complete Charpoy) and S&F ply wood of size 1990x900x12mm thick BWR grade ISI marked with appropriate mild steel galvanised iron nuts and bolts of 6mm dia and suitable size long complete all as specified and directed. |
| 53 | S&F new stiffner made of MS size 900x25x4mm including two coats of synthetic enameled paint over a coat of red oxide primer shall be welded between the long rail by making two nos holes in each stiffner complete all as specified and directed. |
| 54 | FD-388(R) Charpoy IP Folding :Removing of old unserviceable ply top from charpoy folding tightening of loose all components (ie complete Charpoy) and S&F ply wood of size 1990x900x12mm thick BWR grade ISI marked with appropriate mild steel galvanised iron nuts and bolts of 6mm dia and suitable size long complete all as specified and directed. |
| 55 | Replacement of old/us PVC shoes and S & F new PVC shoes shall be fixed at the bottom of the legs of chair verandah and all as specified and directed. |
| 56 | FD/MAP/II/01 CHARPOY IP MS TUBE WITH PLY TOP :- Removinf old u/s top and S&F plywood top of size 1930X900MM, 12mm thick BWR Grade ISI Marked confirming to IS-303 of Charpoy with Hard top mdae to shape & size as shwon on drawings, complete all as specified and directed by GE. 12x6mm thick half round teak wood beading shall be provide alround the edges of plywood with suitable adhesive and headless nails. |
| 57 | S&F new stiffner made of MS size 900x25x4mm including two coats of synthetic enameled paint over a coat of red oxide primer shall be welded between the long rail in each stiffner complete all as specified and directed. |
| 58 | Table Centre Brass Stand with Glass Top :S&F Glass top for table centre size 600x1200mm made out of 10mm thick exterior grade complete all as specified , directed and shown on drawing. |
| 59 | Shoe Rack Steel (FD-E6/MAP/02/ (R) : M & L for repairing of steel frame of shoe rack to make as per shape & size as shown on drawing complete all as specified and directed by GE. |
| 60 | M & L for repairing of steel shelves of shoe rack to make as per shape & size as shown on drawing complete all as specified and directed by GE. |
| 61 | Replacement of old/us PVC shoes and S & F new PVC shoes shall be fixed at the bottom of the legs of chair verandah and all as specified and directed. |
| 62 | Painting : M&L for prepartion of old painted/steel surfaces by wire brushing/scratching/ straightening dented portion and applying two coat of synthetic enamel paint with sprayer complete all as specified and directed to give a glosy finish for the following items :- |
| 63 | FD-1031 Almirah large steel with shelves external and internal complete all as specified and directed |
| 64 | FD-1032 Almirah medium steel with shelves external and internal complete all as specified and directed |
| 65 | FD/E6/MAP/18 Almirah large steel MAP complete all as specified and directed |
| 66 | FD-165M Table dining ORs steel complete all as specified and directed. |
| 67 | FD-1003 Table office officer steel complete all as specified and directed |
| 68 | FD-381 Table office clerk steel complete all as specified and directed |
| 69 | FD-E6/MAP/17 Teapoy verandah /MAP complete all as specified and directed. |
| 70 | FD-1029 Locker bed side steel/SKD complete all as specified and directed |
| 71 | FD/E6/MAP/02 Rack shoe steel MAP complete all as specified and directed |
| 72 | FD-1008 Table 3 x 2 with or without drawer steel compplete all as specified and directed |
| 73 | FD-1009 Table 3 x 3 steel complete all as specified and directed |
| 74 | FD-256 Chair verandah complete all as specified and directed |
| 75 | FD/MAP/II/01 Charpoy IP Square Type Ply Top complete all as specified and directed |
| 76 | FD/E6/08/MAP Bed Hard Steel with Ply Top complete all as specified and directed |
| 77 | FD-388(R) Charpoy IP Folding complete all as specified and directed Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender