Tender For Repairs To Joinery,Tiliing, Flooring, Plumbing,Fixtures At Kg Line, Kohima Line Blocks , Gurudwara Road,Shanti Vihar, Khaun Road 3 Ew Bde, Stn Jcos Mess,101 Ta ,Afmsd & Cmp Unit In The Area Of Age B/R (East) Under Ge (N) Pune
Tender Value
40 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
5 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery,Tiliing, Flooring, Plumbing,Fixtures At Kg Line, Kohima Line Blocks , Gurudwara Road,Shanti Vihar, Khaun Road 3 Ew Bde, Stn Jcos Mess,101 Ta ,Afmsd & Cmp Unit In The Area Of Age B/R (East) Under Ge (N) Pune
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and as directed. |
| 3 | Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and as directed. |
| 4 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 65 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and as directed. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 5 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate100 mm x 65 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 6 | S & F for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and as directed. |
| 7 | S & F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and all as per direction of Engineer-In-Charge. |
| 8 | S & F second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed. |
| 9 | S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples complete all as specified and as directed. |
| 10 | Supply and fixing Fiber Glass Reinforced plastic (FRP)Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 11 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge |
| 12 | Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining making good the existing surface etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 13 | S &F powder coatedaluminium deco grill medium grade of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge. |
| 14 | S&F powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading with fixing provision for exhaust fan complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F fancy type 19/20mm curtain rod ( Drapery rod) CP tubing with PVC colour coating and two No finials ( Latto) of decorative knobs at both ends with brackets and min 8 to 10 Nos PVC curtain hooks for each window/ door and complete fixing arrangements complete all as specified and as directed. including taking down existing curtain rod/ palmate box of any description and any position etc all as specified and directed. |
| 16 | S & F 5.5mm thickness Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane for aluminium doors complete all as specified and as directed. |
| 17 | S & F 4.0 mm thickness Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane for aluminium doors complete all as specified and as directed. |
| 18 | Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples complete all as specified and as directed |
| 19 | All as per item No 18 above but figured glass complete all as specified and as directed. |
| 20 | S&F Stainless steel butt hinges 100mm complete all as specified and as directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as directed and specified. |
| 21 | S&F Aluminium anodised Tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as directed and specified. |
| 22 | S&F Stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) complete all as directed and specified. |
| 23 | S&F Stainless steel Handle of 150 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as directed and specified. |
| 24 | Supply and fixing 300mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required complete all as specified and as directed. |
| 25 | S&F in repairs Aluminium anodised Tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as specified and as directed. |
| 26 | S&F in repairs Aluminium anodised sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) complete all as specified and as directed. |
| 27 | S&F in repairs Aluminium anodised sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) complete all as specified and as directed. |
| 28 | S&F in repairs floor door stopper of Stainless steel body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified. |
| 29 | S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane including hacking out existing broken glass complete all as specified and as directed. |
| 30 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 31 | M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but n exceeding 0.11 Sqm , in floors etc. set set in neat cement slurry and joint filling of tiles by using epoxy to match the surface all as specified.. including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 32 | M&L coloured vitrified double charge tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floors using suitable spacer etc. set set in neat cement slurry and joint filling of tiles by using suitable spacer and epoxy to match the surface all as specified including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 33 | M & L Glazed coloured ceramic(Designer) tiles in vertical surface 450x300x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, including finishing of corners with PVC beading all as specified and as directed by Engr-in-charge including 10mm thick rendering in cement mortar 1:4 and demolition of existing tiles complete all as specified and as directed. |
| 34 | M & L for Granite (Lakha red / Kharde red /Rubby red ) 18 mm to 20mm thick machine cut,(of any type work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. bedded and jointed with gray cement slurry and pointed with white cement withadmixture of pigment to match the shade of granite stone complete all as specified and as directed. |
| 35 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed. |
| 36 | Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make: Sintex, Polycon, Rotex |
| 37 | S&F in repair 20mm bore tubes uPVC pipes SDR 11 & Plain uPVC SDR 11 fittings all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and as directed. |
| 38 | S&F in repair 25mm bore tubes uPVC pipes SDR 11 & Plain uPVC SDR 11 short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and as directed. |
| 39 | S&F in repairs 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 40 | S&F in repairs 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors. |
| 41 | S&F in repairs 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to walls. |
| 42 | S&F in repairs 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed. |
| 43 | S&F in repairs 50mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed. |
| 44 | S&F in replacement PVC (SWR) floor trap 75mm dia of outlet, plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 45 | S&F CP grating round 100mm/75 mm size with/without hole complete all as specified and as directed. |
| 46 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.complete all as specified and as directed. |
| 47 | S & F in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed. |
| 48 | S & F in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed. |
| 49 | S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed. |
| 50 | S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed. |
| 51 | S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed. |
| 52 | S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed. |
| 53 | S & F in repairs 110 mm bore PVC (SWR) door bends any radius complete all as specified and directed |
| 54 | S & F in repairs 75 mm bore PVC (SWR) door bends any radius complete all as specified and directed |
| 55 | S & F of Shelf of PTMT oif 450 mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed. |
| 56 | M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and as directed. |
| 57 | S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including PVC P-trap 100 mm dia , complete including making good to floor all as specified and as directed. |
| 58 | S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, including 600mm long PVC connection with PTMT nuts and plastic water closet seat of white in colour, back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. |
| 59 | S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy type, to be fixed with M S brackets complete all as specified and as directed. |
| 60 | S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as directed. Make Cera/Prayag/Hindware |
| 61 | S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Cera/Prayag or of equivalent make as per Appx 'A' as approved by GE |
| 62 | S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and as directed. Make : Prayag/Polytuff. |
| 63 | S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm all as specified. |
| 64 | S&F in repair 15mm dia brass chromium plated pillar tap type, sink cock U Type with regulator with extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified and as directed. |
| 65 | S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws complete all as specified and as directed. |
| 66 | S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 67 | S&F in repair 600mmx450mm beveled edge looking mirror of selected quality glass of thickness not less than 5.50mm, itched desined corners, fixed to wall with 12mm dia spacers at each corners, complete all as specified and as directed. |
| 68 | S&F in repair Cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified and as directed. Make : Prayag/Polytuff. |
| 69 | S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or Techno commercially equivalent in approved makes. |
| 70 | S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make : Johnson Magna series Cat part No: T2804C or Techno commercially equivalent in approved makes. |
| 71 | S & F of 15 mm Stop valves,Chromium plated fancy type quater turn screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 72 | S & F of 15 mm Concealed type Stop valves quater turn,Chromium plated fancy typescrewed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 73 | Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified and as directed. Make Pyage/ Polytuff |
| 74 | S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR Fusion Series or Techno commercially equivalent in approved makes. |
| 75 | S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or Techno commercially equivalent in approved makes. |
| 76 | S&F in repairs Two Way (2 in 1) bib taps with wall flange quarter turn suitable for 15mm bore pipe fancy type brass CP, screwed for iron pipe or brass ferrule complete all as specified. Make: CERA F1020163 or Techno commercially equivalent in approved makes. |
| 77 | S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Crossbond |
| 78 | S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 79 | S & F soft close telescopic drawer channel, 550mm length, sidemount type, suitable for weight upto 35 Kg complete all as specified and as directed by Engr-in-charge. |
| 80 | S & F Stainless steel drawer handle ,100 mm size, decorative type fixed with SS screws complete all as specified and directed by Engr-in-charge. |
| 81 | S & F SS Auto soft closing concealed cabinet hinges, bright finish or electro galvanised complete all as specified and as directed. |
| 82 | S & F Stainless steel drawer /cabinet chest pull/kadi handle ,75 mm size, fixed with SS screws complete all as specified and as directed. by Engr-in-charge. |
| 83 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons, wall, etc, including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed. |
| 84 | M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 85 | M&L for Fabrication & fitting of modular kitchen with cabinet & wardrobe/ cupboard made out of 18mm thick ,solid, decorative type, WPC (Wood Polymer Composite) board, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on edges and fixing with necessary full body threaded star headed counter sunk S.S screws, including providing cabinet for keeping baskets/ cutlery basket with handles complete.Make : Rajshree or equivalent all as specified and approved by Accepting Officer Note: Modular Kit accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply onlyM&L for etc complete all as specified and as per direction of Engineer- In- Charge. (Note: hinges shall be paid separately) |
| 86 | S&F in repair Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters |
| 87 | S&F in repair Kitchen basket stainless steel for Partition basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed. |
| 88 | S&F in repair Kitchen basket stainless steel for Plain basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed. |
| 89 | S&F in repair Kitchen basket stainless steel for Dish(plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters complete all as specified and as directed. |
| 90 | S&F brass Handle fabricated type polished of Size 125 mm complete all as specified and as directed. |
| 91 | S&F in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 92 | Supply and fix in repairs for stainless steel plate rack of size 36 inch x 31 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna ) or Techno commercially equivalent in approved makes. |
| 93 | S&F In repair mild steel powder coated 3 ball telescope slippery track 16'' long fixed to SS basket with clamp complete all as specified and as directed. |
| 94 | S & F Stainless Steel Auto Concealed Zero Crank Cabinet Hinges complete all as specified and as directed. |
| 95 | S&F Fancy Stainless steel Handle of 150 mm size (modular selected quality of design as approved) for Cup Boards fixed with Self Tapping screws complete all as specifed and directed by Engr-in-Charge |
| 96 | Demolition of Brickwork or stone/ boulder masonry, built incement mortar includingall quoins, arches, pillars,etc,complete all as specified and as directed. |
| 97 | Material and labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 98 | Taking Down Cement Plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 99 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of whitewash over a coat of primer on new surface complete all as specified and as directed. |
| 100 | M&L for 10mm thick cement plaster in CM 1:6 on bricks or concrete surfaces finishing the surfaces even and fair with two coats of oil bound distemper of any tint over a coat of alkali resistant primer complete all as specified and as directed. |
| 101 | Taking up or down 20 mm bore steel /PPR/CPVC tubing or any other pipe and connections, and removing to store for taking in account of credit and fixing of CPVC pipes 25mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified and as directed. |
| 102 | Taking up or down 25 mm bore steel /PPR/CPVC tubing or any other pipe and connections, and removing to store for taking in account of credit and fixing of CPVC pipes 32mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified and as directed. |
| 103 | M&L for welding in repairs door/wondow/shutters in any description exc 2.5cm n exc 5cm in length and thickness of metal to be welded exc. 6mm but n exc 9mm complete all as specified and as directed. |
| 104 | M & L Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc one brick complete all as specified and as directed. |
| 105 | S&F of 1.5mtr long pully operated cloths drying system consisting consisting of chormiun plated pipe of outer dia 22mm, inner dia 19.80mm , pulleys made up of delrin with nylon rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable ) locking system to hide rope knot, channel to be mounted or fixed with self tapping screws provided in kit. Rope will be HDPE double core of 4mm dia , fixing to ceilling as specified and directed and minumum weight of one pipe shall not be less than 0.20kg/m, minumum weight of rope shall not be less than 5500gms/unit ( for 06 pipes) Make : Easy dry or Techno commercially equivalent in approved makes. |
| 106 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed. |
| 107 | S&F 35mm thick IInd class hard wood ,Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 108 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces complete all as specified and as directed. |
| 109 | S & F for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 110 | S&F repair of 2nd class HW clean sawn timber framed and fixed in scantlings, to replace old and decayed timber of chowkhat or other works etc (including piecing,scarfing, etc of old and new timbers if required) and removing defective portions to store complete all as specified and directed |
| 111 | S&F Mild steel rat tail rod pattern springs of size 300mm including roller and roller plate fixing to iron frame or wooden door by welding/ screwing including cutting out old damaged/inactive helical door spring complete all as specified and as directed. |
| 112 | Taking down shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each and refixing in the same opening after easing and adjusting and complete all as specified and directed. |
| 113 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 114 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc to FE 410-W (Gde-E-250) quality -A complete all as specified and as directed. |
| 115 | M & L for preparing new steel and iron surfaces of any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 116 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 117 | S & F Pre - painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering fixed to walls fixed with self tapping screws complete all as specified and as directed. |
| 118 | S & F Pre - painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws complete all as specified and as directed. |
| 119 | Dismantling ceiling boards any description, any thickness including cover fillets complete all as specified and as directed. |
| 120 | Supply and fix anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling using 25x23x1.5mm tee both ways & wall angel of 35x25x1.5mm (wall angle to be fitted to walls by scewing on wooden plugs (inserted in wall at every 60 Cm c/c) and neatly sealed the cutting opening ) and including hangars 6 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long(all costs are included) complete all as specified and as directed. |
| 121 | Supply and fixing of Non asbestos fibre cement building boards 4mm thick (lake and hill design) laid/inserted to timber/ Steel /aluminum frmework in repairs complete all as specified and as directed. |
| 122 | M&L for fixing of snake guard/door seal made aluminum colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified and as directed. |
| 123 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender