Tender For Repair To Misc B/R Works And Periodical Services In Otm Accn Of Mh Danapur, Mh Offrs Mess, Nursing Mess And Other Connected Area Under Age B/R-Ii At Ge Danapur Cantt
Tender Value
20 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
15 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Misc B/R Works And Periodical Services In Otm Accn Of Mh Danapur, Mh Offrs Mess, Nursing Mess And Other Connected Area Under Age B/R-Ii At Ge Danapur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed. |
| 2 | Same as item No. 1.00 above but on ceiling surfaces. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing complete all as specified and directed. |
| 4 | Dismantling of floor, hearth or walls tiles incl cement mortar bedding but not backing and rubbish off permises complete all as specified and directed. |
| 5 | Demolition of reinforcement cement concrete of any description in any position as required (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed. |
| 6 | M&L for 10mm thick Light shade vitrified ceramic tiles in floors, area of each tile not exceeding 0.36 Sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 7 | M&L for 10mm thick Light shade vitrified ceramic tiles, area of each tile not exceeding 0.36 Sqm as on vertical surfaces skirtings, dados etc, over and including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 8 | M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 9 | M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough for laying kota stone / tiles complete all as specified and directed. |
| 10 | M&L for glazed ceramics coloured tiles of size (450x300x 7mm)/350x250x7mm) thick on vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 11 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and as directed. |
| 12 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed. |
| 13 | M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM 1:4 in half brick thick wall complete all as specified and directed. |
| 14 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, sub base, mass concrete etc. complete all as specified and directed. |
| 15 | M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade and three part of sand (all by weight) complete all as specified and directed. |
| 16 | M&L for durastone heavy duty coloured vitrified tiles 300x300x7-8mm thick exterior grade set and jointed with neat cement slurry and painted in in white cement mixed with pigments to match the shade of tiles over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 17 | Taking down cement plaster on wall/ceiling /roof etc including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 18 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces of wall in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured & paid separately |
| 20 | M&L Rendering 5mm thick in cement mortar 1:3 on concrete surface of ceiling and finishing the surface even and smooth complete all as specified and directed. |
| 21 | Supply only water proofing compound (liquid),ISI marked complete all as specified and directed. |
| 22 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 23 | Same as item No 22 above but exc 1.5 Sqm and n.exc. 4 Sqm each. |
| 24 | Taking down shutters of any description exc 1.00 Sqm and n exc 2Sqm each complete all as specified and directed. |
| 25 | M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick but n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed. |
| 26 | S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkats for door complete all as specified and directed. |
| 27 | S&F of 35 mm thick factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS 1003 (Part I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified & directed. |
| 28 | S & F 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. |
| 29 | Easing of Aluminium window of glazed & gauzed shutters including small fittings oiling, greasing and welding if required and make it functional complete all as specified and directed. |
| 30 | Easing of Aluminium Door of glazed shutters including small fittings oiling, greasing and welding if required and make it functional complete all as specified and directed. |
| 31 | S&F in repair aluminium partition wall with following specificaiton complete all as specified and directed.(a) Member with Single side groove of size 63.50 x 38.10 x 1.95 [email protected] Kg/RM(b) Member with Both side groove of size 63.50 x 38.10 x 1.95 [email protected] Kg/RM(c) Partialy 5mm thick Aluminium Composite Seat decorative(d Partialy 5 mm thick tinted glass.(e) Aluminium and PVC beading as per requirement as in fixing for particle board and glass.(f) Size of Pannel should not greater than (1.2m x1.2m) |
| 32 | S & F in repair aluminium door shutter with following specification:-(a) chowkhat frame of size 63.50x38.10x1.95mm thick weight @ 1.092Kg/RM.(b) Style/Vertical member of size 47.62 x 44.45 x 2.02 mm thick weight @ 1.052Kg/RM(c) Top member of size 47.62 x 44.45 x 2.02 mm thick weight @ 0.974(d) Bottem member of size [email protected]/m(e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket.(f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips(g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter.(h) Aluminum and PVC beading as per requirment as in fixing for ACP shhet & Glass, jointing cleat including locking arrangement. etc. |
| 33 | S & F in repair aluminium window sliding shutter three track with following specification:-(a) chowkhat frame bottem member of size 92x31.75x1.50mm @ 1.248Kg/RM.(b) chowkhat frame Top & side members sides and member of size 92x31.75x1.50mm @ 1.060Kg/RM.(c) Shutter sides members of size [email protected]/RM(d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment.(e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket.(f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, jointing cleat including locking arrangement. etc |
| 34 | S & F pressed steel frame of size 105 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed. |
| 35 | S & F pressed steel frame of size 125 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed. |
| 36 | S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 37 | S & F solid PVC door frame of size 75 mm x 50 mm made out of choice colour PVC with wood grain solid complete all as specified and directed. |
| 38 | S&F Factory Made Solid PVC Moulded Door Shutter & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 39 | S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 40 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed. |
| 41 | S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 42 | S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 43 | S&F 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 44 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 45 | S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 46 | S & F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete all as specified and directed. |
| 47 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 48 | S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 49 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames glazed with oil putty or fixed with beads complete all as specified and directed. |
| 50 | S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 51 | S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter incl shelves complete all as specified and directed. |
| 52 | S&F in repairs continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 53 | S&F in repair 40 mm dia cup board knobs, fixed with nut, screw and washer of mild steel bright finish complete all as specified and directed. |
| 54 | S&F of ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed. |
| 55 | S&F in repair 2 lever brass mortice lock, vertival type grade-I aluminium size 65 mm etc complete all as specified and directed. |
| 56 | S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 57 | S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed. |
| 58 | S&F in repair curtain rod fancy type anodised aluminium type curtain rod 20 mm dia including brackets as approved complete all as specified and directed. |
| 59 | S&F in repair 5.5mm thick looking mirror selected quality glass n.exc 0.50 Sqm each and fixed to wall with brass screws, cup and washers including polishing, rounded off edges of glass and drilling holes in glass complete all as specifed and directed. |
| 60 | Taking up or down steel tubing and connections of 15 mm dia complete all as specified and directed. |
| 61 | Taking up or down steel tubing and connections of 20 mm dia complete all as specified and directed. |
| 62 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed. |
| 63 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia complete all as specified and directed. |
| 64 | S & F in repair 15 mm dia single lever Basin mixer without popup waste system including all necessary fittings as approved complete all as specified and directed. |
| 65 | S&F in repair 15mm dia brass CP wall mixer\\"L\\" Bend with wall flange(Provision for overhead shower) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 66 | S&F in repair vitreous china ware WHB of size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed. |
| 67 | S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 68 | S&F in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest, 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed. |
| 69 | S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall complete all as specified and directed. |
| 70 | S&F in repair for ABS Health Faucet with 1m Tube & Hook screwed for iron pipe complete all as specified and directed. |
| 71 | S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and directed. |
| 72 | S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. |
| 73 | S&F in repair bib tap 15 mm bore cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed. |
| 74 | S&F in repair pillar tap 15 mm bore fancy type chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, with or without lettered \\"HOT\\" or \\"COLD\\" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 75 | S&F in repair brass CP steel tubular towel rail 20 mm dia \\"D\\" type 60 cm long between flange aluminium anodised complete all as specified and directed. |
| 76 | S&F in repair 15 mm bore stop valves fancy type chromium plated with long shank and cup (concelaed type) , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 77 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 78 | S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 79 | S & F in reapir chromium plated corner glass shelf with brackets complete all as specified and directed. |
| 80 | S&F in repair Stainless steel soap dish of size 300 x 150 mm etc fixed to wall with screw complete all as specified and directed. |
| 81 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. |
| 82 | S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 83 | S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 84 | S&F in repair brass chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed. |
| 85 | S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed. |
| 86 | S & F in reapir chromium plated toilet paper holder with flap brass, chromium plated or stainless steel all as specified and directed. |
| 87 | M&L for RCC 1:1.5:3 A-1 type (using 20 mm graded stone aggregate) as in kitchen platform, shelves including necessary form work complete all as specified and directed. |
| 88 | M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 89 | S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 90 | Taking down PVC/AC pipes upto 110mm bore (including all fittings) with spigot & socket encls & lead joints incl burning out joints complete all as specified and directed. |
| 91 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall, trenches complete all as specified and directed. |
| 92 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 93 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed. |
| 94 | M & L PVC(SWR) bend of 110 mm dia of any radius etc complete all as specified and directed. |
| 95 | M & L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed. |
| 96 | S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. |
| 97 | S&F in repair CP/PTMT grating with or without waste hole 100 mm size (ISI Marked) complete all as specified and directed. |
| 98 | Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and directed. |
| 99 | Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed. |
| 100 | S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 101 | Same as item No. 100.00 above but 1000 Ltrs capacity. |
| 102 | S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed. |
| 103 | S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 104 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 105 | M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 106 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 107 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 108 | M&L for applying 2mm thick Birla / JK Putty on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 109 | M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed. |
| 110 | M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 111 | M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed. |
| 112 | Same as item No 111 above but on ceiling complete all as specified and directed. |
| 113 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 114 | M&L Preparing old painted surfaces of walls, chajjas etc by washing, rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 115 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 116 | S&F in repair Door closer hydraulically regulated cast iron body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 117 | M&L 80 mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 118 | Cleaning, removing all scale, dust, dirt and elgy using wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching power solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black paint on white base on tank \\"Tank cleaned on ____ Dt_____\\". Capacity 500 Ltrs complete all as specified and directed. |
| 119 | Same as item No 118 above but of capacity 1000 litres. |
| 120 | S & F in repair Vitreous china wash down water closet pan ( pedestal pattern ) Rimless Single Piece WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 385x720x710 mm, S Trap- 300 mm complete all as specified and directed Make : Jaquar Cat part No ONS-WHT-10853S300UFSM or equivalent in Hindware/Kohler. |
| 121 | S&F rubber gasket for door sealing complete all as specified and directed. |
| 122 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in roof padding/kerbs/sunken slab etc complete all as specified and directed. |
| 123 | M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed. |
| 124 | M &L for preparation of newely plasterd surface and applying Premium Acrylic Smooth exterior paint with Silicone additives of required shade: as Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over one coat of 3.00mm putty at any height complete all as specified and directed. |
| 125 | Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed. |
| 126 | S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed. |
| 127 | S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 128 | M & L for 8 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed. |
| 129 | M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 130 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 131 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 132 | S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W Grade E 250 complete all as specified and directed. |
| 133 | Dismantaling of Asbestos cement/GI (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 134 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 135 | S&F Providing precast cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate for louvres and jallies, 25mm thick (measured solid), including all moudings set in cement mortar 1:4 complete all as specified and as directed. |
| 136 | M&L for two coats of weather coat paint (apex) on old/new surfaces of wall including preparation of plastered surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender