Tender For special Repair To Vip Car/Mt Shed And Swt At Cicg And Toilets At Otm Accn Of 505 Abw And Bldg No P-73, (Fresh Store Shed) At Depot Area Under Ge (North) Delhi Cantt-10
Tender Value
48.77 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
12 days left
EMD
97600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Vip Car/Mt Shed And Swt At Cicg And Toilets At Otm Accn Of 505 Abw And Bldg No P-73, (Fresh Store Shed) At Depot Area Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each. |
| 2 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc 1.5 Sqm and n.exc 4.00 Sqm each. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 4 | M&L for Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc. |
| 5 | M&L for joint free Non skid ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 6 | Demolition cement concrete (un reinforced) in any description and in any position not otherwise specifically provided and packing n exc 15 cm thickness all as specified |
| 7 | M&L for machine cut kota stone slab flooring 18-20 mm thick over 20mm thick cement screed bed using cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 8 | M&L Mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete. |
| 9 | S&L in repair Steel rolling shutters 1 mm thick , but gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type |
| 10 | Safety lever locks mild steel with 4 levers for rolling shutters |
| 11 | Ball bearing for rolling shutters |
| 12 | M&L PCC 1:2:3 type B1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof top surface complete all as specified. |
| 13 | M&L for normal water proofing treatment on roof slab consisting with following operations:-(i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wir brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Lit/m2 on the surface. Laying 3mm thick APP membrane habing non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm ie overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers'(ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane(iii) Dusting dry sand @ 0.75 Kg per Sqm over the membrane indicated above |
| 14 | M&L for 15 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces mixed with WPC complete all as specified and dierected. Note : WPC shall be measured and paid separately |
| 15 | Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mi- tres and stopped ends, etc. |
| 16 | M&L for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of aluminium paint, complete all as specified and directed. |
| 17 | M&L for RCC nominal mix type B1 1:2:4 (using 20 mm graded aggregates) in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 18 | M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent ot shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips |
| 19 | Formwork to chullah hoods chajjas troughs and similar items including edges for fough finished surfaces of concrete |
| 20 | S&F Solid PVC molded door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC Sheet suppling & fixing in opening as per specification & drawing. |
| 21 | Factory Made Solid PVC Moulded Door Shutter with partical board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing in SSR |
| 22 | S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed |
| 23 | S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified |
| 24 | S&F aluminium bow handle,cast type,anodised 125mm long complete fixed with steel screws. |
| 25 | S&F Aluminium sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with & including a min of 6 bolts & nuts four on bolt plate & two on staple plate & fixed 200 mm long |
| 26 | Demolition of brick work built in cement mortar and removing rubbish complete |
| 27 | M&L Brickwork with subclass 'B' Brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:4 complete at any position all as specified. |
| 28 | All as the description of srl item No. 27 but except brick complete. |
| 29 | Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site. |
| 30 | All as the description of srl item No 29 above but 20 mm dia bore. |
| 31 | All as the description of srl item No 30 above but 25 mm dia bore. |
| 32 | M&L for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors. |
| 33 | All as the description of srl item No 32 but 20 mm bore. |
| 34 | All as the description of srl item No32 but 25 mm bore. |
| 35 | All as the description of srl item No 32 herein before but refixing old steel tubing. |
| 36 | All as the description of srl item No 32 herein before but refixing old steel tubing. |
| 37 | All as the description of srl item No 32 herein before but refixing old steel tubing. |
| 38 | Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete. |
| 39 | S&F in repair bib taps 15mm bore, long body bib cock with wall flange, fancy type, brass chromium plated with quarter / half turn screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed. |
| 40 | M&L in repair 15mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed |
| 41 | M&L in repair 15mm angle cock, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed |
| 42 | S&F in repair fancy type brass chromium plated shower rose with arm complete |
| 43 | S&L 25 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete. |
| 44 | S&L 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete. |
| 45 | S&F in repair looking mirror of size 600mmx450mm with 5 mm thick mirror of selected quality glass, mounted on plastic frame and fixed complete. |
| 46 | S&F in repair Brass chromium plated tubular towel rail 20mm dia fixed with screw to wall complete |
| 47 | S&F in repair vitreous chaina squatting pan Orissa pattern size 580x440 white with integral foot rests, trap etc (Excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 48 | S&F vitreous china urinals half stall bowl, flat back large of size 420x395x635 mm white with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as specified. Make - Cera Cat No S4020102. |
| 49 | S&F Sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. |
| 50 | S&F, in repair PVC Flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket complete. |
| 51 | S&L in repair PVC connection 15 mm bore, 600 mm long complete with both ends unions. |
| 52 | Demolition/taking down PVC/CI drain/Rain Water Pipe under floor or wall of internal dia 75/100 mm, set in cement mortar/ Bricket (working height not exc. 10 mtrs ) complete incl fittings. |
| 53 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore complete. |
| 54 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore complete. |
| 55 | S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete. |
| 56 | S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110 mm bore complete. |
| 57 | S&F PVC (SWR) bends any radius, 75 mm bore complete. |
| 58 | S&F PVC (SWR) bends any radius, 110 mm bore, complete. |
| 59 | S&F PVC (SWR) junction single (single T), equal or unequal, 75 mm bore, provided with access door complete. |
| 60 | S&F PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, provided with access door complete. |
| 61 | S&F PVC (SWR) vent cowl, 110 mm bore complete. |
| 62 | M&L in repair PVC (SWR) floor trap plain with grating in cluding jointing with solvent cement 75/100mm dia |
| 63 | Dismantling water storage tank exc 500 & n.exc 1000 ltr capacity all as specified |
| 64 | S&F for 1000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc all as specified in SSR part- I |
| 65 | S&F in repair vitreous china wash basin, snow white of size 440x525x195mm oval shape including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. |
| 66 | S&L in repair Hot and Cold mixture pillar taps for WHB, cast copper alloy, with half/quarter turn swan neack, fancy type, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete. |
| 67 | Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 68 | M&L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, surface finished even and smooth complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as supply only. |
| 69 | M&L Rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete. |
| 70 | M&L for Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete |
| 71 | Supply only integral water proofing compound. |
| 72 | S&F in repair Stainless steel wire mesh 0.36 mm dia fixed with tinned tacks of stainless steel wire and avg width of aparture 1.4mm complete. |
| 73 | Material & labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete. |
| 74 | Material & labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete. |
| 75 | Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete. |
| 76 | M&L for PCC 1:1-1/2:3 type A0 using 12.5mm graded mechanically crushed stone aggregate of thickness exceeding 15mm and not exceeding 25mm in repairs of RCC beams, roof and chajjas including setting coat 5mm thick rendering in CM 1:3 and necessary form work and scaffolding, making drip course complete all as specified and as directed. |
| 77 | M&L for 18-20mm thick granite (of any type) stone slab work (table rubbed and polished) as wash hand basin laid over and including 20mm thick screed bed in cement mortar 1:6, set in white cement with pigment and pointed in white cement 1:2 using marble dust with admixture of pigment to match with shade including cutting granite slab circular or oval shape for fixing of vitreous china wash hand basin of desired size and shape including rubbing and polishing and making sandwitch moulding to edges complete all as specified and directed. Note:- Breakage if any in granite slab will be born by the contractor). |
| 78 | S&F powder coating aluminium frame for doors windows, ventilators with one or more rebates including joining cleat for fixing with glass pan or lowers etc. complete all as specified |
| 79 | M&L for laying 75mm thick plain cement concrete type D-2 1:4:8 40mm graded crushed stone aggregate as sub base of floor finish all as specified and directed |
| 80 | M&L for Chequered cement concrete tiles 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over 15mm thick screed bed in cement mortar 1:6 all as specified and directed. |
| 81 | M&L for two coats of synthetic enamel paint on steel surfaces , over 10 cm in width or grith not other wise described complete. |
| 82 | M&L for providing precast cement concrete in 1:2:4, type B1 using 20 mm graded stone aggregate in landings, cover slabs chullah hoods, chajjas, water troughs including necessary form work all as specified and directed. |
| 83 | S&F Sheet Glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pan |
| 84 | S&F in repair vitreous china urinal partition white of size 310 x 770mm complete all as specified and directed. |
| 85 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in subase of floor, including necessay form work complete all as specified and directed. |
| 86 | M&L for cement concrete work in pavement/hard-standing of flexural strength 40 Kg/per square centimetre in field using 400 kg of cement per cubic metre thickness of concrete 25cm or less over sub base including use and waste of side form work in alternate bays and finishing surface of concrete roads pavements including use and waste of side form for laying pavement in bays between joints necessary form work. |
| 87 | M&L for finishing the surface of concrete roads pavements by brooming all as specified and directed. |
| 88 | M&L for Forming construction joint 30 mm deep x 10mm wide filled with sealing compound Grade 'B' all as specified and directed |
| 89 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' |
| 90 | M&L for forming 12mm thick expansion joints thickness of concrete slab 150mm filled with pre-formed bituminous filler and tip 30mm primed and sealed with sealing compound Grade 'A' |
| 91 | M&L for fixing of Galvanized low carbon wire chicken mesh with 1 to 2 mm dia hexagon or honeycomb opening with aperature 12 to 30mm fixed to wall or concrete surfce before plastering work |
| 92 | Excavating in post holes in soft/loose soil for similar holes) each n exc 0.50 cu.m, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeing 25cm, |
| 93 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in hold fasts,etc including necessary use and waste of form work complete. |
| 94 | S&F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section ,Tube etc), including distance pieces, cleats etc. confirming to Fe - 410- W including cutting, welding & necessary fittings such as nut bolt, plate etc. complete all as specified and directed. |
| 95 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings . |
| 96 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 97 | M&L for plain cement concrete 55mm thick type B-0 1:2:4 (12.5mm graded stone aggregate) as in prepration surface of wall and floors over brick workre the surface with using liqued water proofing compound @ 0.200ml/50kg cement during mixing of concrete ived floor tiles. |
| 98 | Supply only liquid water proofing compound |
| 99 | M&L Water proofing treatment walls surface consisting of the following operation including demolition/taking down old treatment :-(i) Cleaning of surfaces by wire brushing brooming removing dust particles (ii) Filling of all brick joints with cement mortar 1:4 (iii) Applying a coat of Chemical Dr fixit Pidifin 2K (iv) applying fiber mesh setting with chemical Dr fixit Pidicrete URP (v) final coating with Pidifin 2K and sprinking of sand (vi) After the surface dried, plaster the surface with CM 1:4 15 mm thick. (Note All water proofing treatment will be executed by the authorised representative of Dr fixit). |
| 100 | M&L Water proofing treatment on floor consisting of the following operation including demolition/taking down old treatment :-(i) Cleaning of surfaces by wire brushing brooming removing dust particles (ii) M&L PCC 1:2:4 type (Bo) using 12.5 mm graded stone aggregate 50 mm thick, finishing the surface even and smooth without using extra cement (iii) Applying a coat of Chemical Dr fixit Pidifin 2K (iv) applying fibe mesh setting with chemical Dr fixit Pidicrete URP (v) final coating with Pidifin 2K and sprinking of sand (vi) After the surface dried, screeding the surface with CM 1:4 15 mm thick including finishing even and smooth using extra cement. (Note All water proofing treatment will be executed by the authorisedrepresentative of Dr fixit). |
| 101 | S&L in repair 50 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete. |
| 102 | M&L for Hard core broken stone but n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rolled, rammed to a true surface |
| 103 | M&L for laying 100mm thick plain cement concrete type D-2 1:2:4, 20mm graded crushed stone aggregate as in floor all as specified and directed |
| 104 | M&L for rendering 20 mm thick in CM 1:3 over brick or concrete surfaces finishing the surfaces with sagol finish on plastered surface of internal wall all as specified and directed. |
| 105 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of priming with chalk whiting, on plastered surfaces preparatory to distempering complete. |
| 106 | M&L for preparation of new steel untreated surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel (ordinary tint) over a coat of Red oxide zinc chrome all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender