Tender For Repair To Roof , Flooring, Tilling , Toilet Block , Staircase , Ceiling Plaster, Joinery Works, Aluminium Door, Windows, Sanitary Fittings, Drainage And Certain Misc Connected Works At Pcda(O) Under Age B/R-I Of Ge (S) Pune
Tender Value
49 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
19 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Roof , Flooring, Tilling , Toilet Block , Staircase , Ceiling Plaster, Joinery Works, Aluminium Door, Windows, Sanitary Fittings, Drainage And Certain Misc Connected Works At Pcda(O) Under Age B/R-I Of Ge (S) Pune
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cement concrete 25mm thick type B-1, 1:2:4 (20mm graded agg) in flooring. Including demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below & above ground level) complete all as specified and directed. |
| 2 | M & L for cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in leveling course of roof, chajja coving and base slab for tank. Including demolition of PCC complete all as specified and directed. |
| 3 | Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete,complete all as specified and directed. |
| 4 | M&L for rendering 10 mm thick cement plaster on brick / concrete/stone surfaces using with CM (1:6 ) complete all as specified and directed. |
| 5 | M&L for rendering 10 mm thick cement plaster on brick / concrete/stone surfaces using with CM(1:6 ) including Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | Rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and directed.(NOTE : WPC shall be measured and paid seperately) |
| 7 | Rendering 15mm thick in CM (1:4) on brick / concrete/stone surfaces including taking down cemet plaster fron brick/stone/concrete suaface and recking out joints, hacking for key complete and also using water proofing compound as per manufacturers instruction finished with sponge finish.complete all as specified and directed. (NOTE : WPC shall be measured and paid seperately) |
| 8 | Supply water proofing compound only |
| 9 | M&L for 20 mm Granite (of any type) work (table rubbed and polished) in steps, , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as counters of any radious |
| 10 | M & L Water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (Note :-This item is continued below:-(a) M&L for applying Two Coats of URP (Dr Fixit ) Liquid with mixing of Cement before and including providing 15mm thick plaster/screed bed layer in cement mortar (1:3) on concrete surfaces with using Water proofing Compound as per Manufacturer instruction mixing and using extra cement mixed with including approved make WPC @ 3% wt of cement all as directed by Engr-in-Charge. (b) Preparing plastered surfaces of sunken slab, walls, etc, by brooming with broom sweeping free from dirt dust etc & form angle fillet of size 40mm x40mm along the junction of wall and floor using polymer modified mortar |
| 11 | (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitousgrout “Dr Fixit Bathseal Grout or its equivallent ” as approved by GE. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner all as specified & directed by Engr-in-Charge. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus or its equivallent” on all angle fillets by brush and cover it with mm ope woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2K or its equivallent ” as approved by GE can be further applied right upto 2.1m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40mm OD UPVC pipe at the lowest point with 300mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (Note :- Lean concrete will be measured and paid separatily) ( g) Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. |
| 12 | M&L coloured joint free Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) including laid over 10 mm thick backing coat in CM (1:4).including Dismantling floor, hearth or wall tiling complete all as specified. |
| 13 | M&L for glazed ceremic coloured digital printed ceramic tiles of size 300mmx600mmx7mm thick in vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including 10mm thick backing coat in CM (1:4) and filleting at top etc including Dismantling floor, hearth or wall tiling complete all as specified. |
| 14 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, ,over and including 15mm thick screed bed in cement mortar(1:6) including Dismantling floor, hearth or wall tiling complete all as specified and directed. |
| 15 | M&L for coloured joint free Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.72 sqm but not exc 1.20 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) including laid over 15 mm thick screed bed in CM (1:6).including Dismantling floor, hearth or wall tiling complete all as specified and directed. |
| 16 | S&F 150mm overall length of cover plate brass body door stopper and tongue with hard drawn steel spring complete all as specified and directed. |
| 17 | Taking down chowkats or frames wooden/steel with shutters (w/o taking off guard bar from frames) n.exc 1.5 Sqm each complete all as specified and directed. |
| 18 | Taking down chowkats or frames wooden/steel with shutters (w/o taking off shutters from frames) exc 1.5 Sqm and nexc 4 Sqm each complete all as specified and directed. |
| 19 | Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 Sqm each complete all as specified and directed. |
| 20 | S&F aluminium powder coated three track sliding window with two or more shutters with & including 4 mm thick tinted glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc using PVC beading etc using following sections of `Jindal Aluminum Ltd ' as approved. fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes.(a) Frame bottom 20620(b) Frame top & side 20681(c) Shutters top & bottom 20844(d) Shutter inter lock 20724(e) Handle (Side ) for 20606 shutters, |
| 21 | S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperature for mosquito proofing and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :-(a) SP 20048(b) Glazing clips 19352 |
| 22 | S&F aluminium door with chowkhat of section 80mm x 40mm of wall thickness 2.00 and bottom rail 160 x 40mm of wall tickness 2.00mm including glazing with 5.5mm thick sheet glass and also incl fittings such as aluminium tower bolt-1 No, handle-2 Nos, glazing pins, clips, beading and hydraulic door closure regulated designated 3 universal type complete all as specified and directed by Engr-in-Charge. The shutter frame shall be tied at top (internally) with screw of round bar 10mm dia, aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make etc complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F in repairs aluminium powder coated partition using following sections of `Jindal Aluminum Ltd ' as approved with 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue complete as directed fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes and dismantling :-(a) SP – 20048 (b) DP - 20047(c) Glazing clips - 19352 |
| 24 | S & F pressed steel frames for doors with one & more rebates incl necessary fixing lugs,hinges,lock strike plate etc complete as specified size of frame 105 x 60mm. Incl MS hold fast , PCC bedblock(1:2:4) type B1 for hold fast and cement concrete 1:3:6 type C1 (12.5mm graded stone agg) for filling in MS frame.. |
| 25 | S & F 35mm thick flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both side including 3mm thick, 1st Class HW (TW) beading all around on edgingand 3 Nos MS cold rolld 100mm size butt hinges welding to existing MS frame (where shutter fixed with old existing MS frame) all as specified and directed by Engr-in-Charge . |
| 26 | S & F solid PVC door frame of size 50mmx95mm made out of 5mm plain colour PVC sheet reinforced with MS tube suppling and fixing in opening complete all as per specification and drgs. |
| 27 | S & F factory made solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2,4 or 6 raised panels design with 2mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face,supplying & fixing solid in frame at site as per specification & drgs all as specified and directed by Engr-in-Charge . |
| 28 | S & F in reapir galvanised stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aparture 1.18mm etc complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F 200mm Alu. Anodised barrel tower bolt of extruded sec complete all as specified and directed. |
| 30 | s&F 300mm Alu. Anodised Sliding door bolt of extruded sec with hasp and staple complete all as specified and directed. |
| 31 | S&F 100mm size Stainless steel butt hinges complete all as specified and directed. |
| 32 | S&F 150mm Aluinium Anodised handle, fabricated type complete all as specified and directed. |
| 33 | Taking down aluminium window frame with shutter and necessary repair with rubber gasket, roller, concealed lock, as required screw, other fitting and refixed in the same opeing with making good surfaces while disturbe during necessarY repairs works complete all as specified and directed. |
| 34 | Taking down aluminium door frame with shutter and necessary repair with rubber gasket & Seals, pivetinges, spindel, hinges, locks & Cylinders, Corner Joints & Cleats , Roller and Sliding Gear and other fitting and refixed in the same opeing with making good surfaces while disturbe the surface during necessary repairs works complete all as specified and directed. |
| 35 | Supply and fixing of GI water tubing, medium grade with fittings, fixed to wall and ceiling (conceled) or laid in floor of size including Taking up or down GI tubing and connection, |
| 36 | (a) 15 mm bore |
| 37 | (b) 20 mm bore |
| 38 | (c ) 25 mm bore |
| 39 | S&F in repairs of Bib taps CP 15mm bore fancy type with wall flange conforming to CAT No.ARI-CHR-39037, LYR-CHR-38037,PUS-CHR-29037, AQT CHR-3031of \\"Jaquar\\" complete all as specified and directed. |
| 40 | S&F in repairs of Soap dish CAT No. ACN-1131N, CPA-CHR-1131, AQN-ACR-7731 \\"Jaquar\\" make complete all as specified and directed. |
| 41 | S&F in repairs of CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No. ACN-1111SM, CAN-CHR-1111BSM, AKP-CHR-35711PS of \\"Jaquar\\" make complete all as specified and directed. |
| 42 | S&F in repairs of Health faucet CAT No. ALD-CHR-565, ALD-BCH-573M & ALD- CHR-ALD-583 of \\"Jaquar\\" make complete all as specified and directed. |
| 43 | S&F in repairs of Angular type stop cock conforming to CAT No.SOL-CHR-6053C, SOL-CHR-6053H, FUS-CHR-29053 of \\"Jaquar\\" make complete all as specified and directed. |
| 44 | S&F in repairs of CP toilet paper holder conforming to CAT No.ACN-CHR-1153S, ACN-CHR-CAN-CHR-1157 of \\"Jaquar\\" make complete all as specified and directed. |
| 45 | S&F in repairs of CP 15mm bore 2 way bib cock with wall flange conforming to CAT No. SOL-CHR-6041, FUS-CHR-29041 & ARI-CHR-39041 of \\"Jaquar\\" make complete all as specified and directed. |
| 46 | S&F in repairs of CP towel ring round with round flange conforming to CAT No. CAN-CHR-1121BN, CAN-CHR-1121N & AKP-CHR-35721P of \\"Jaquar\\" make complete all as specified and directed. |
| 47 | S&F in repairs of Liquid Soap dispenser of AKP-CHR-35735P, CAN-CHR-1135n & Dezzle DG 1313 of \\"Jaquar\\" make stainless steel Liquid soap dispenser (silver) |
| 48 | S&F in repairs of Towel Rack with Hanger Cat Part No. AHS-CHR-1581H, CPA-CHR-1181 & CAN-CHR-1181Sof \\"Jaquar\\"make Stainless steel complete all as specified.and directed |
| 49 | S&F in repairs of Corner Glass Shelf (with Bracket) complete all as specified and directed. |
| 50 | S&F in repairs of Pillar Cock long Neck Cat Part No-CQT-CHR-23021, ARI-CHR-39011 & COP-CHR-011PM of \\"Jaquar\\" Make complete all as specified and directed. |
| 51 | S&F in repairs of Sink Mixer with swinging spout (Table mounted Model) with 450mm long Braided Hoses Part No-FUS-CHR-29173B, SOL-CHR-6173B & FUS-CHR-29009b of \\"Jaquar\\" Make complete all as specified and directed. |
| 52 | S & F in repairs of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 20mm bore. |
| 53 | S & F in repairs vitreous china squatting Pan \\" Orissa \\" pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete . |
| 54 | S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), including 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottom, & cover & M S CP or aluminium hinging device, complete. |
| 55 | S&F in repair cascade type (coloured) floor mounted water closet with lowlevel flushing cistern single piece coloured with floor trap , PVC coloured seat cover and connecting pipe etc complete all as speicifed and directed by Engr in charge. |
| 56 | S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, CP brass waste coupling 32mm dia,& CP pillar cock long body etc all as specified and directed. |
| 57 | S & F repair vitreous china wash Table top counter basin(colour), Rectangle type and CP waste coupling, CP bottle trap, Pillar cock long neck with aerator complete all as specified and directed. |
| 58 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting n.exc. 10cm girth.complete all as specified and directed. |
| 59 | S & F in repairs 15 mm bore Bib taps, fancy type, CP , chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 60 | S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed. |
| 61 | S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 62 | S&F in repair 1500 x 600 mm bevelled edge looking mirror of selected quality glass , mounted on 6 mm thick AC built board or commercial ply board and fixed to wooden plug with chromium plated brass screws and cup washer complete all as specified and directed. |
| 63 | S&F in repair 900 x 750 mm bevelled edge looking mirror of selected quality glass , mounted on 6 mm thick AC built board or commercial ply board and fixed to wooden plug with chromium plated brass screws and cup washer complete all as specified and directed. |
| 64 | S&F in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of |
| 65 | (a) 15mm bore |
| 66 | (b) 20mm bore |
| 67 | (c) 25mm bore |
| 68 | S&F 15mm dia PVC connecting pipe 450mm long with PTMT nuts of suitable size at both ends complete all as specified & as directed including taking out old one. |
| 69 | S&F 15mm dia PVC connecting pipe 600mm long with PTMT nuts of suitable size at both ends complete all as specified & as directed including taking out old one. |
| 70 | S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, bracket & flush pipe complete as specified and directed. |
| 71 | S&F in repair 32mm dia flush pipe of polythene of high density for low level flushing Cistern complete all as specified & directed. |
| 72 | S&F in repair 32mm dia flexeble PVC waste pipe complete all as specified and directed. |
| 73 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches/floor with clamps etc.complete all as specified and directed. |
| 74 | S & F in repairs 110mm dia., PVC (SWR) bends any radius complete all as specified and directed. |
| 75 | S&F in repairs of PVC (SWR) pipe 75mm bore laid in trenches or floors single socketed in any length with rubber rings joints complete all as specified and directed. |
| 76 | S & F in repairs PVC (SWR) bends any radius 75mm single socketed in any length with rubber rings joints complete all as specified and directed. |
| 77 | S & F in repairs PVC (SWR) branch piece, single (Y) equal orunequal radius 110mm complete all as specified and directed. |
| 78 | S&F in repairs PVC(SWR) vent cowl of 110mm bore complete all as specified and directed. |
| 79 | S&F in repairs PVC(SWR) branch piece double (Y) equal or unequal 110 mm bore with access door complete all as specified and directed. |
| 80 | S&F in repairs PVC(SWR) junction single (T) equal or unequal 110 mm bore with access door complete all as specified and directed. |
| 81 | S&F in repairs PVC (SWR) floor trap, plain with grating incl jointing with solvent cement. 75 mm dia of outlet complete all as specified and directed. |
| 82 | S&F in repairs of 100mm dia Grating doom of PTMT (Minimum Wt-25gram) wit cement mortar complete all as specified and directed |
| 83 | S&F in repairs of Urinal Spreader of PTMT any colour for fixingwith 15mm dia pipe complete all as specified and directed. |
| 84 | S&F PVC (SWR) `P` trap 110mm and fixed with WC with necessary solvent complete all as specified and directed. |
| 85 | S&F PVC (SWR) `S` trap 110mm and fixed with WC with necessary solvent complete all as specified and directed. |
| 86 | M&L for Core Cutting in Stone Masonnary wall of 120mm dia upto 0.50m length complete all as specifed and direted .(Note - for core cutting necessary eqpt included with rates) |
| 87 | Demolition of brick work or stone/boulder masonry, built in cement mortar complete all as specified and directed. |
| 88 | M&L for brick work with fly ash Bricks straight or curved on plan exec 6 mtr mean radius with moduler bricks in CM 1: 6 complete all as specified and directed. |
| 89 | M&L for Pre-cast cement concrete block , Type C1- ( 1:3:6), masonery with solid block, exc 10cm in width and setting in mortar with 1:6, straight or curved on planfor drain work complete all as specified and directed |
| 90 | M&L for Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, drains, manholes, post etc and getting out in in soft/loose soil complete all as specified and directed. |
| 91 | M&L PCC (1:4:8) type D-2 as in foundations, filling in mass concrete etc.Including Demolition of PCC in flooring complete all as specified and directed. |
| 92 | M&L PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in benching to MH and coping etc complete. Including Demolition of PCC |
| 93 | M&L for PCC 1:4:8 type D2 as in concrete bed to drains including forming cradles for 150mm bore pipe all as specified and dircted. |
| 94 | M&L RCC pipes class NP-2 laid and jointed complete with collars of 150mm bore complete all as specified and directed. |
| 95 | M&L for providing cement concrete type C- 1, 1:3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protection finishing even and fair on top using extra cement with 6mm wide joints throughout the thickness of plinth protection all as specified. |
| 96 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, mold mitered stopped ends etc (Inner girth only measured) |
| 97 | Removing building material exc. 1 km total distance including loading, unloading and stacking at the destination outside the defence land to a distance n.exc. 5 KM (One Load-5CUM materials) |
| 98 | Hacking out old broken glass and fixing with 5.0mm thick sheet glass ordinary quality in squares or rectingular exc 0.5 sqm each pane(any thickness, size, quality or description) from wooden or steel frames or stone, concrete or brick surrounds, glazed with putty or clips and fixed with beads complete as specified and directed. |
| 99 | Supply and fix in replacement rotational moulded polyethylene water storage tanks in replacement (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of washouts, (vent pipe all as directed of following capacity including all new tank nipples of suitable size. |
| 100 | (a) 500 ltr. |
| 101 | (b )1000 ltr. |
| 102 | (c) 2000 ltr. |
| 103 | M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth, removing existing treatment completely and applying two coats of Apex Ultima Weather shield paint over a priming coat complete all as specified and directed. |
| 104 | M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth, removing existing treatment completely and applying one coats of Apex Ultima Weather shield paint on plastered surfaces of wall complete all as specified and directed. |
| 105 | M&L for preparation of old decorative surfaces of wall incl, cornices (plastered or unplastered) of any description, sand papered , and dusted and applying one coat of Oil Bound distemper complete all as specified and directed. |
| 106 | Material and labour for preparation of old plastered surfaces of walls and applying two coats of OBD over a coat of alkali resistant priming coat & smooth surface with internal 1mm thick wall care putty. complete all as specified and directed. |
| 107 | All as per item No 96 above but on ceiling |
| 108 | M&L for preparation of old painted wooden surfaces exe 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 109 | M&L for preparation of new steel surfaces exe 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 110 | M&L for preparation of old painted steel surfaces exe 10 cm width or girth and applying One coat of synthetic enamel paint complete all as specified and directed. |
| 111 | M&L for Complete removal of existing treatment and applying two coats of luster paint white or tinted on walls with internal 1mm thick wall care putty & applying a coat of primer on putty complete all as specified and directed |
| 112 | M & L for french ploishing on surfaces of any descrption , exceeding 10 cm width or girth over a coat of a coat of wood filler including cleaning and preparation of old wooden surfaces . |
| 113 | M & L preparation of new plaster surfaces and applying two coats of water base luster paint over 2mm thick wall care putty on walls over a coat of primer all as specified and directed by Engr-in-Charge. |
| 114 | M & L preparation of new plaster surfaces and applying two coats of OBD on walls over a coat of primer all as specified and directed. |
| 115 | M & L preparation of new plaster surfaces and applying two coats of waterproof Asian paint overa coat of Primer on walls complete all as specified and directed. |
| 116 | M & L for applying two coats Cement base paint on walls incuding preparation of old plaster surfaces complete all as specified and directed. |
| 117 | M&L for grubbing up tree trunk exc 30cm and not exc 100 cm including cutting of trunk portion protruding over roof/wall, digging out roots, and using anti roots chemical before filling holes of cement mortor 1:4 and leveling of ground, stacking of serviciable material and removing of unserviciable material. |
| 118 | S&F in repairs of POP false ceiling two or more layer (ractangular/ oval/ rounded) decorative design with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of ,prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid (Silhaute type) as Main 'T' 38 X25 mm , cross 'T\\" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc incl over a coat of 1-2 mm thick POP finish including applying two coats of luster paint over a coat of primer matching with the colour of ceiling including making niches for fans/light, design and also including dismantling and approved by Enger in charge complete all as specified and directed. (Note : vertical and horizontal etc are measured and paid in flat square). |
| 119 | M&L for decorative POP cornices/moulding of pettern as per approved by Engr-in-Charge of cross section area exc. 13 Sqcm and n.exc. 25 Sqcm and fixed including preparation of surface and applying two coats of luster paint over a coat of primer matching with the colour of ceiling all as directed by Engineer-in-Charge. |
| 120 | S&F in repairs of false ceiling with 9 to 9.5 mm thick glass fibre reinforced Gypsum ceiling tiles of size 595 X 595 mm ,prima fine fissured micro look white coloured laid over including grid work 600 x 600 mm using GI powder coated “T:” section grid as Main 'T' 38 X25 mm , cross 'T\\" 25 x 25 mm and wall angle 25 x 25 mm grid and 6 mm dia GI suspension wireand incl dismantling etc complete all as specified and directed. |
| 121 | M&L for Gypsum ceiling board/tiles for ceiling prepainted, perforated finish, 595 x 595x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 27x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed. including Dismantling of wall/ceiling boards of any thickness including cover fillets complete all as speciified. |
| 122 | S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations , fixed with screws to timber/ aluminium frame work complete all as specified and directed incl Dismantling boarding , any description, fixed in any position with screw |
| 123 | S&F in repair 12mm thick plywood, grade BWR, type BB,commercial faces,fixed with screws to timber frame work complete all as specified and directed. |
| 124 | S&F in repair of Plain fillets in 2nd class hard wood,sectional area exc 13 & nexc 25 sqcm,wrought,fixed with screws etc complete all as specified and directed. |
| 125 | S&F in repair for colour sunmica 1mm thick in Glossy, Matte or texture, water resistant fixed with fevicol on ply wood surfaces Make as to be fixed in raised wall paneling, shutter of shelf, ward robe or flush shutters etc complete all as specified and directed. |
| 126 | Supply and fix in repairs of 6mm thick PVC hollow wall paneling plain/coloured/printed fixed with screws to wall and corner on pvc battens, edges of panels be sealed with appropriate arrangement, corner with silicone sealant or specialized construction adhesive match to colour and pattern as approved Complete all as specified and as directed. |
| 127 | S & F in repair contionous piano hinges MS bright finish or electro galvinised with of flaps 30mm complete all as specified and directed. |
| 128 | M&L 75 mm thick PCC (1:4:8) type D-2 as in sub base of floorig all as specified and directed.includng demolition of PCC complete all as specified and directed. |
| 129 | M & L in repairs of machine pressed precast concrete interlocking paver block with grey cement and pigment, glossy finish, any shape and size comforming to IS-15658-2006 of 60mm thick M-30 grade, laid over and including 50mm thick stone dust cushioning, laid dry to the profile over rammed earth/murrum filling all as directed by Engr-in-Charge. |
| 130 | M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6). Including dismantling of old tiles. |
| 131 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought uotp course CM 1:3 complete all as specified and directed. |
| 132 | S&F in repairs of Thick Hair cracked in stone masonery wall by applying the following methods 1. Use a grinder wall cutting machine for to widen the crack slightly (inward, creating a dovetail shape) and removing the loose dust by compressed air/brush complete clean. 2. Applying non-shrink grout or polymer modified mortar or high strength structural epoxy or resin into the crack using a putty knife or trawel. Pressed deeply to avoid air pockets. 3. Blend the surface to level the patch with the rest of the block /stone surface. 4. Wall Texture can be dab the wet mortar with a stiff brush to blend it in as per specified structrure surface and do the plaster work complete. 5. Keep the mortarsurfaces slightly moist (mist with water) for 2 to 3 days to prevent it from shrinking and cracking as it. 6. Finally apply tow coats of OBD with one coat putty for matching the existing surface complete all as speified and directed. |
| 133 | M&L for preparation of affected concrete and steel surfaces as in ceiling of roof slab, window chajja & Col by cleaning with metallic wire brush scruplously and carrying out the following operations stepwise.(i) Applying rust remover solution on steel bars by using cotton waste swab or by brush and leave the surface for atleast 15 to 30 minutes. Remove the loose rust particles by scrubbing with brush and wash the steel surface with water.(ii) Apply red oxide primer over cleaned steel surfaces.(iii) Apply epoxy bonding agent (adherent solution) over cleaned dust free old concrete surfaces.(iv) Apply Micro concrete and superplasticizers on disturbe concrete surface r with the help of trowel in single or multilayer as or when required at site for making good similar during application and finishing the surface even and smooth.Note:- (a) The rate of items included of bars which are corroded badly has to be strengthen by placing new bars by means of welding with proper splice length. (b) The rate of item included necessary formwork, shuttering, scaffolding staging etc. |
| 134 | M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth including removing existing treatment completely and applying One coats of weather proof exterior paint complete all as speicified and dircted |
| 135 | M & L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 136 | M & L for RCC Type B1, 1:1.5:3 (20 mm graded stone aggregate ) as Slabs supported on walls, beams and columns in floors, roofs, landing s, balconies, canopis, deck slabs and in pilasters and buttresses. Demolition of Reinforced Cement Concrete ( reinforcement cut as required to facilitate demolition)of any description |
| 137 | M & L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 138 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in ceiling cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed. |
| 139 | Material and labour for preparation of New plastered surfaces of ceiling and applying two coats of Water base luster paint over priming coat & smooth surface with internal 2 mm thick wall care putty complete all as specified and directed. |
| 140 | M&L for Dismantling of structural steel works including door, gates, shed frame, perline etc. similar works complete all as specified and directed. |
| 141 | M & L for Framed work such as post, perline, grills, gratings, door, window frame etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified. |
| 142 | S&F Mild steel work in ornamental and intricate design for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 143 | M&L Preparation of New or previously untreated Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide complete all as specified and directed |
| 144 | S&F in repairs of vitreous china urinal, Half stall type colour with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush pipe, Brass CP grating and union for discharge pipe complete fixed in repairs |
| 145 | S & F in repairs of roof sheeting prepainted galvalume aluminium zinc coating 150 gms GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 146 | M&L for repairing work of Steel Rolling Shutters by cleaning, Greasing of gear operated, chain whell, hand chain, Ball bearing changes and provision of safety leaver lock complete servicing and found serve condition all as specifed and directed. |
| 147 | M&L for repairing work of Collapsible Steel Gates by cleaning, Greasing of gear operated, chain whell, Roller changes and painting complete servicing and found serve condition all as specifed and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender