Tender For Welcome Maintenance And Internal Periodical Services Alongwith Certain B/R Wks Of Dk-I In The Area Of Age B/R-I Including Repair/Replacement Of Old Unsv Electric Fitting / Fixturs And Replace In Modular Type Internal Wiringm Db, Mcb, Mccb
Tender Value
45 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance And Internal Periodical Services Alongwith Certain B/R Wks Of Dk-I In The Area Of Age B/R-I Including Repair/Replacement Of Old Unsv Electric Fitting / Fixturs And Replace In Modular Type Internal Wiringm Db, Mcb, Mccb & Other Allied E/M Works At New Pratap Chowk, Pratap Chowk, Khyber Line, Daps School, Int Mess, Ahpu Unit And Adjoining Area Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Preparation of wire mesh surfaces by brushing and applying a coat of synthetic enamel paint on GI wire mesh complete (measured over all one side only). |
| 2 | M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth and applying one coat of synthetic enamel paint , complete all as specified. |
| 3 | Complete removal of existing old treatment on surface from walls with machenical scraper (machine) complete all as specified and directed. |
| 4 | M& L a coat of alkali resistant primerover alread prepred surface of walls complete all as specified and directed. |
| 5 | M& L for preparing the entire surface with applying 2-3 mm thick birla/ JK wall care putty on walls/ ceiling surface finished even and smooth complete all as specified and directed. |
| 6 | M& L for applying two coats of oil bound distemper on wall/Ceiling surface with mechanical /roller brush(as per direction) complete all as specified and directed. |
| 7 | M&L preparation of old plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed |
| 8 | Complete removal exising treatment of old/ new surfaces of wall scrubbing by machenical scrapper (machine) with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying 2-3 mm birla wall care putty Two coats of weather proofing exterior acrylic emulsion paint of any make over one coat of primer from the same manufacturer white lime wash even and smooth with roller brush complete all as specified and directed. |
| 9 | Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed |
| 10 | M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished een and smooth without using extra cement up to hieght of four storey ,including scaffolding complete. |
| 11 | M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in multistorey building ,complete all as directed |
| 12 | M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling, chajja in multy storey building etc complete all as specified |
| 13 | M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed |
| 14 | M&L for new plaster surface two coat of oil bound destemper over 2mm thick of birla white putty including preparation of newly plastered surface etc all as specified. |
| 15 | Hacking out old broken glass of any thickness size quality or description frame wooden frames /Aluminium frame fixed with wooden beads/aluminium beads/steel window and M&L 3.5 mm thick sheet galss ordinary quality and glazing with wooden bead/aluminium beads, putty etc complete all as specified |
| 16 | Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified |
| 17 | Dismantling floor, hearth or wall tiles including cement mortar concrete bedding amd removing rubbish off the premises complete all as specified and directed. |
| 18 | M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in floors finished even and fair complete all as specified and directed. |
| 19 | M&L Non skid cerermic coloured tiles 300x300X 7 to 8 mm thick (Square/rectangular) area of each tile in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6). |
| 20 | All as item No 19 above but as in skirting over rendering 10mm thick in cement mortar 1:4. |
| 21 | M&L Vitrified ceramic Light shade coloured tiles 600x600x 9-10mm thick square/rectungular polished area of each tile in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6. |
| 22 | All as per item No 21 above but as in skirting over rendering 10mm thick in cement mortar 1:4. |
| 23 | M&L Glazed ceramic coloured tiles (600X300mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4. |
| 24 | Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified |
| 25 | Taking down chowkats or frames exc 4 Sqm but not exc. 6 sqm each with shutters (without taking off shutters from frames), complete all as specified. |
| 26 | Taking down shutters of any desciption area exc 1.0 Sqm but n.exc 2.0 Sqm each and removing to or from store |
| 27 | M&L for Plain, solid, straight chowkats and frames made of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,making good , complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S&F for 32mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 29 | M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified. |
| 30 | Anodised aluminium powder coated sliding windows, window shutters and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking system, suitable handle (1 no.) complete all as specified and as directed by Engineer-in- charge. |
| 31 | S&F powder coated Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors,Brass 2 lever mortice lock verticle type size 100mm, hinges, anodiesed aluminium snap beading screw with etc. |
| 32 | S&F solid PVC door Prelam frame of sixe 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing. |
| 33 | S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) both side prelam clouor consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of both side prelam clouor PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. |
| 34 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micron in squares exc 0.5 Sqm each pane. |
| 35 | Supply and fixing PVC wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing on PVC frame /Aluminium door at site etc complete all as specified and as directed by Engineer-in- charge. |
| 36 | S&F 150mm long extruded stainless steel handle fabricated type |
| 37 | S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified(Fixing included in item 43 here-in-before). |
| 38 | Supply only 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified(Fixing included in item 43 here-in-before). |
| 39 | S&F for 150 mm size stainless steel barrel tower bolts of extruded section and fixed to shutter complete |
| 40 | S&F for MS 300mm size, door spring Pencil type rat tail rod pattern springs including roller and roller plate complete. |
| 41 | S&F for 100 mm size long mortice lock vertical type ,4 levers with key in duplicate, brass body with brass two nos handle fixed in shutters with screw complete all as specified |
| 42 | Supply&fix in repairs two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge. |
| 43 | S&F for galvanized stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia fixed with stainless steel wire staples including beading complete all as specified and as directed . |
| 44 | M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfaces complete all as specified and directed. |
| 45 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store and S&F 15mm GI tubes, medicum grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.' |
| 46 | Ditto but 20 mm bore. |
| 47 | S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia and minimum thickness 1.2mm of SS-304 Grade of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed. |
| 48 | S&F in repairs PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float and handle and fixed to IWC on existing brackets, fixed in repairs. |
| 49 | S&F in repair bathroom mirror 400x600mm decorative mirror selected qualtiy glass, with PVC frame complete all as specified and directed. |
| 50 | S&F chlorium plated shower roses with or without swivel join ts 100mm size incl fixingto steel pipe in repairs |
| 51 | S&F in repair vitreous china Pedastal, for above mentioned item no. 78 complete all as specified and directed. |
| 52 | S & F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 53 | S & F in repairs Chromium plated health faucet (hand spray) with 1mtr long PVC flexiable pipe 15mm bore and fixed to in position etc complete all as specified and directed. |
| 54 | Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge. |
| 55 | M & L for Point wiring complete with 1.5 sqmm single core PVC unsheathed insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new/existing and metalic/non-metalic rigid PVC conduit medium grade ISI Marked not less than 20 mm dia including all conduit accessories surface /concealed in wall/ceiling/fixed to roof/truss/columns etc by cutting chases and including provision of 1.5 sqmm PVC unsheathed insulated copper cable FRLS as earth continuty, suitable fabricated branded modular metal flush box / M S steel terminal boxes duly make embossed, concealed in wall and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular inner and outer cover plates with laminated top sheet cover for housing switches , socket out let and fan regulators etc concealed in walls with suitable , all as specified and as directed for the followings:- |
| 56 | One light/ fan point controlled by one way switch |
| 57 | One bell point controlled by one bell push |
| 58 | One light point controlled by two Nos two way switches |
| 59 | One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 60 | One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. |
| 61 | All as per item No 55 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete. |
| 62 | Supply & fixing in replacement of white cover plate with frame 1 module/ 2 module complete all as specified and directed by Engineer in charge. |
| 63 | Supply & fixing in replacement of white cover plate with frame 3/4 module complete all as specified and directed by Engineer in charge. |
| 64 | Supply & fixing in replacement of white cover plate with frame 6 module complete all as specified and directed by Engineer in charge. |
| 65 | Supply & fixing in replacement of white cover plate with frame 8 module complete all as specified and directed by Engineer in charge. |
| 66 | M&L switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified. |
| 67 | M&L Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified. |
| 68 | M&L switch modular type 6 amp SP two way, 1 module complete all as specified. |
| 69 | M&L Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete. |
| 70 | M&L switch Modular type 16 Amps 1Way, 1 module with modular plat, 230V AC complete. |
| 71 | M&L Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete. |
| 72 | M&L modular stepped type electronic fan regulator 120W, 1/2 module complete. |
| 73 | M&L Switch piano flush button type single pole one way 6 Amps complete all as specified. |
| 74 | M&L switch piano flush button type single pole 16 Amps complete all as specified. |
| 75 | M&L socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified. |
| 76 | M&L socket outlet 6 Amp flush button type complete all as specified. |
| 77 | M&L regulator electronic 5 steps type suitable for 1200/1400 mm sweep 230 volts.. |
| 78 | M&L bell electric (dingdong) 230 volt, SP all complete all as specified and directed . |
| 79 | M&L insulated body, angle/batten holder with back plate complete. |
| 80 | S&F ceiling rose surface PVC type with three terminals complete all as specified and directed . |
| 81 | M&L sheet metal enclosure, modular/non modular as per site requirment single pole and neutral with a two pin and earth plug and socket 230 Volts grade complete with one single pole MCB 'C' series 20 A capacity complete all as specified and directed. |
| 82 | S & F LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2000 systems lumen outputwith lifetime of 25000 burning hours with, Power Factor > 0.9, colour temperature - 6500K, surge protection 2.5KV in CM, meets LED IS specifications, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 83 | S & F LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 25000 burning hours with, Power Factor > 0.9, colour temperature - 6500K, surge protection 2.5KV in CM, meets LED IS specifications, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 84 | S & F LED 9/10 watts bulkhead fitting with non yellowing polycarbonate cover, IP 65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 25,000 burning hours , Power Factor >0.9, driver with Voltage range 150-270V, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. |
| 85 | S&F in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base complete all as specified and directed by Engineer in charge. |
| 86 | S & F surface ceiling mounted, LED down light fitting 12 watts , system efficacy at luminary level ≥ 70 Lumens/watt, 25000 burning hours with Power Factor > 0.90, with high voltage variation range - 150 to 270 Volts AC and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. . |
| 87 | S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified. |
| 88 | S & F LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified. Please Enable Macros to View BoQ information |
| 89 | S & F LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender