Tender For Repair/Replacement Of Gi/ Ci Fitting, Bathroom Fixtures, Garage Shutter Repair In Dk-Ii In The Area Of Age B/R-I Including Repair/Replacement Of Certain Unsv Electric Fitting & Fixturs Including Replacement Of Defective Internal Wiring Sys
Tender Value
50 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
12 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Gi/ Ci Fitting, Bathroom Fixtures, Garage Shutter Repair In Dk-Ii In The Area Of Age B/R-I Including Repair/Replacement Of Certain Unsv Electric Fitting & Fixturs Including Replacement Of Defective Internal Wiring System With Mcbs, Dbs And Allied Works At Mynamati Lines And Adjoining Area At Rrrc Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided. |
| 2 | S&F Mild steel work as in compound girders and stanchions, latticegirders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250)Quality-A) |
| 3 | Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified. |
| 4 | S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified. |
| 5 | Refixing only 15 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs complete all as specified. |
| 6 | Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified. |
| 7 | S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified. |
| 8 | Refixing only 20 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs complete all as specified. |
| 9 | Taking down gear operated rolling shutter for repairs of area n. exc. 8sqm and of any thickness of laths including top cover, spring and shaft, gear box with rod, side guide channels etc and refixing in its original positionafter necessary repair complete all as specified and directed by Engineer- in-charge. |
| 10 | All as per Sr item No. 9 herein before but rolling shutter of area exc 8sqm but n. exc. 30sqm each complete all as specified and directed by Engineer- in-charge. |
| 11 | Taking down gear operated rolling shutter of any area and any thickness of laths including top cover, spring and shaft, gear box and rod, side guide channels etc complete all as specified and directed by Engineer- in-charge. |
| 12 | S&F gear operated type with bevel gear box and crank handle steel rolling shutters (lath thickness 1.25 mm ) without ball bearing, as specified incl. top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed by Engineer- in-charge. |
| 13 | M&L two coats of synthetic enamal paint to new steel surfaces of any discription over 10 cm width or girth not otherwise described incl preparation. |
| 14 | M&L one coats of synthetic enamal paint to old painted steel surfaces of any discription over 10 cm width or girth not otherwise described incl preparation. |
| 15 | S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 75/100mm mm dia ,in four storey building complete all as specified Make prince |
| 16 | S&F in repairs PVC (SWR) junction double,(double T , 75 mm bore ), equal or unequal complete, including jointing with solvent cement. |
| 17 | S&F in repairs 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement |
| 18 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection in repairs complete all as specified. |
| 19 | S&F Chromium plated jet for EWC complete all as specified. |
| 20 | S&F in repairs Vitreous china wash basin, white, flat back, size 550 X 400 mm including fixing with brackets exclusive of fixing of supply and waste pipe and 32 mm chromium plate waste fitting with long screwed shanks and fly-nuts complete all as specified. |
| 21 | Supply only for PVC valve less syphonic action type low level flushing cistern white of capacity 10 Ltrs with inlet valve float and fixed to water closet with PVC flushing pipe 32mm dia complete all as specified. |
| 22 | S & F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 23 | Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge. |
| 24 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box / M S steel terminal boxes, concealed in walls with suitable modular inner and outer plate / 3 mm thick laminated top sheet cover for housing switches , socket out let and fan regulators etc. all as specified and as directed for the followings:- |
| 25 | One light/exhaust fan point controlled by one way switch. |
| 26 | One bell/buzzer point controlled by one bell push. |
| 27 | One light point controlled by two Nos two way switches. |
| 28 | One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 29 | One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. |
| 30 | All as per item No 24 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer in charge. |
| 31 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through existing PVC conduit, including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty and fabricated branded modular metal flush box/M S Steel terminal boxes, concealed in walls with suitable modular inner and outer plate/3 mm thick laminated top sheet cover for housing switches , socket out let and fan regulators etc. all as specified and as directed for the followings:- |
| 32 | One light/fan point controlled by one way switch. |
| 33 | One bell /buzzer point controlled by one bell push. |
| 34 | One light point controlled by two Nos two way switches. |
| 35 | One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 36 | One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. |
| 37 | All as per item No 26 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer in charge. |
| 38 | Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 1module/2 module concealed in walls with suitable modular inner and outer plate for housing switches, socket out let and fan regulators etc including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately |
| 39 | Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 3 module/4 module concealed in walls with suitable modular inner and outer plate for housing switches, socket out let and fan regulators etc including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately |
| 40 | Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 6 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc. including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately |
| 41 | Taking down old unserviceable MS Steel terminal boxes from wall and supply and fixing fabricated branded modular metal flush box 8 module concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc including make good of disturbed surface complete all as specified and directed by Engineer in charge. Note-Switch,socket, regulator will be paid separately |
| 42 | M&L in replacement switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge. |
| 43 | M&L in replacement switch modular type 6 amp SP two way, 1 module complete all as specified and directed by Engineer in charge. |
| 44 | M&L in replacement Modular Bell push button SP, 6 Amps, 1 module 230V AC complete all as specified and directed by Engineer in charge. |
| 45 | M&L in replacement Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge. |
| 46 | M&L in replacement switch Modular type 16 Amps 1 way, 1 module with modular plate 230V AC complete all as specified and directed by Engineer in charge. |
| 47 | M&L in replacement Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge. |
| 48 | M&L in replacement modular stepped type electronic fan regulator 120W, 2 module all as specified and directed by Engineer in charge. |
| 49 | M&L in replacement switch piano flush button type single pole one way 6 Amps complete all as specified and directed by Engineer in charge. |
| 50 | M&L in replacement switch piano flush button type single pole two way 6 Amps complete all as specified and directed by Engineer in charge. |
| 51 | M&L in replacement bell push single pole 6 Amps complete all as specified and directed by Engineer in charge. |
| 52 | M&L in replacement switch piano flush button type single pole 16 Amps complete all as specified and directed by Engineer in charge . |
| 53 | M&L in replacement socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified and directed by Engineer in charge. |
| 54 | M&L in replacement socket outlet 5 pin 6 Amp flush button type complete all as specified and directed by Engineer in charge. |
| 55 | M&L in replacement regulator electronic switch/socket type 5 steps suitable for 1200/1400 mm sweep 230 volts all as specified and directed. |
| 56 | M&L in replacement bell electric (ding dong) 230 volt, SP all complete all as specified and directed by Engineer in charge . |
| 57 | M/L in replacement insulated body, angle holder (metal ring) with back plate complete all as specified and directed by Engineer in charge. |
| 58 | S&F ceiling rose PVC/Polycarbonate type with three terminals complete all as specified and directed by Engineer in charge . |
| 59 | M&L in replacement sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 20Amps complete with one single pole MCB 'C' series 10/20 A capacity complete all as specified and directed by Engineer in charge. |
| 60 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, IP-20 protected,voltage range-180 to 270 Volts AC, temperature range 0 to 45 Degree C minimum and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 61 | Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and IP- 20 protected,voltage range - 180 to 270 volts AC, temperature range 0 to 45 Degree C minimum, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. |
| 62 | S&F LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts not less than 3600lm with Metallic CRCA powder coated body,ambient temperature 0 to 50 Deg C, voltage variation range of 150-270 V including necessary fixing arrangementsfixed complete all as specified and directed. |
| 63 | Supply and fix LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, driver with Voltage range 180-270V, Temperature range 0 to 45 Deg minimum, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire complete all as specified and directed. |
| 64 | S&F in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base complete all as specified and directed by Engineer in charge. |
| 65 | Supply and fix surface ceiling mounted, LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 100 Lumens/watt, driver with voltage variation range - 180 to 270 Volts AC and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire complete all as specified and directed. |
| 66 | Supply and fixing LED light fitting 1x16 watt flame proof CMRI certified recommended for explosive depot/ amunition stores IP-65 protection with diecast aluminium housing with heat resistant tougned glass with LED tube light fixtures, driver, holders, connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 67 | S&F 35W high efficient LED street light fitting with pressure die cast Aluminum housing and has lenses for street lighting with polycarbonate cover. The luminaire is IP-65 protected,voltage variation range 180-270V,including provision of suitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed. |
| 68 | M & L for opening up the winding of ceiling fan 1200/1400 mm sweep any make any type and rewinding with super enamelled copper winding wire after inserting super enamelled insulating material binding it with insulating tape etc completely and varnishing well including drying completely. Replacement of worn out / unserviceable capacitor bearing , bush , safety pins, nuts, bolts, washers , rubber bush with ceiling fan clamp, cable PVC flexible 23/0076 and testing the ceiling fan after re-fixing of the blades to the entire satisfaction of Engineer-in-Charge. |
| 69 | Supply and Fixing LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directed by Engineer in charge . |
| 70 | Supply and Fixing LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directed by Engineer in charge . |
| 71 | Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge. |
| 72 | Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge. |
| 73 | Supply & fix in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with double door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 32 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623. |
| 74 | Supply and fix in repair MCCB 125 Amps, FP 415 volts 16 KA, 4 pole, 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge. |
| 75 | Supply and fix in repair MCB SPN 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge. |
| 76 | Supply and fix in repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge. |
| 77 | Supply and fix in repair MCB SPN 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge. |
| 78 | Supply and fix in repair MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge. |
| 79 | Supply and fixing ventilating fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed. |
| 80 | Supply and fixing ventilating fan 200 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed. |
| 81 | Supply and fixing exhaust fan 450 mm sweep (steel Body), 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed. |
| 82 | Supply and fix wall mounted fan 400mm, 230 volts, 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system all as specified and directed. |
| 83 | S & F water heater storage type (Geyser) steel body, vertical type with suitable size of fastner and including provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure complete all as specified of capacity 25 ltr having heating element 2 KW and not less than 5 star rating with minimum two year warrant on product. Note : old unservicable geyser will be deposoted in MES yard. conversion against low rating to 5 star rating. |
| 84 | Supply and fixing wall mounted angular electric chimney black colour of suction power not less than not less than 1200Cum/Hr,Al casette with stainless steel outer layer, touch control panel,3 speed motor with 250 watt with decorative smart cooker hood SS and glass, energy efficent LED light with digital display, including ducting not less than 12 feet as per site required complete all as specified and as directed by Engr-in-Charge. |
| 85 | Supply and fixing ceiling fans complete with blade, down rods, with remote and accessories rated speed not less than 330 RPM, 230 V, 1200 mm sweep, air delivery not less than 220 CMM, BEE five star rated voltage range 180 - 270 volts with brushess direct current motor (BLDC) all as specified and directed by Engr in Charge. (Against BLDC converson). Old fan shall be deposited to MES store yard. |
| 86 | S&F in repair sub main wiring with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories on surface of walls complete all as specified and directed. |
| 87 | M&L for fan motor of ventilating fan 250/300mm sweep plastic body operated on single phase 230 volts 50Hz electric supply as per sample complete including making necessary electrical connections and testing on site after replacement all as specified and directed by Engr-in-Charge at site. |
| 88 | M&L for fan motor of exhaust 300mm/450mm sweep steel body operated on single phase 230 volts 50Hz electric supply as per sample complete including making necessary electrical connections and testing on site after replacement all as specified and directed by Engr-in-Charge at site. |
| 89 | Supply and fix in repair sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 2.5 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduit in walls all as specified and as directed. |
| 90 | Supply and fix in repair sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduit in walls all as specified and as directed. |
| 91 | Supply and fix in repair sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 10 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduit in walls all as specified and as directed. |
| 92 | Supply tape insulation 25mm (ISI marked) 5 mtr length suitable for working voltage of 430 volts complete all as specified and directed by Engineer in charge. |
| 93 | S&F plug top, 3 pin, 16 amp (ISI marked) complete all as specified and directed by Engineer in charge. |
| 94 | S&F plug top, 3 pin, 6 amp (ISI marked) complete all as specified and directed by Engineer in charge. |
| 95 | S&F plug top, 3 pin, 20 amp earth metal clad (ISI marked) complete all as specified and directed by Engineer in charge. |
| 96 | S&F socket 3 pin 20 amp earth metal clad (ISI marked) complete all as specified and directed by Engineer in charge . |
| 97 | S & F PVC Gang box surface type heavy duty suitable for single switch & socket 5 Amps complete all as specified and directed by Engineer in charge . |
| 98 | S & F PVC Gang box surface type heavy duty suitable for two switch & two socket 5 Amps complete all as specified and directed by Engineer in charge. |
| 99 | S & F Gang box surface type heavy duty suitasble for 15 Amps switch and socket complete all as specified and directed by Engineer in charge. |
| 100 | M & L for in replacement only single core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits, all as specified and directed by Engr-in-Charge. |
| 101 | M & L in replacement for only single core PVC insulated cable 2.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. |
| 102 | M & L in replacement for only single core PVC insulated cable 4 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. |
| 103 | M & L in replacement for only single core PVC insulated cable 6 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. |
| 104 | M & L in replacement for only single core PVC insulated cable 10 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. |
| 105 | M&L in replacement copper cable flexible 2 core PVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge. |
| 106 | S&F in replacement 10 Sqmm twin core PVC insulated cable 1100 volts grade, single strand aluminium conductor cable drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories laid underground on earth for making electrical connections of bollard lights including necessary excavation and earth work not less than 30cms deep in any type of soil complete including returning filling and removal of excavted soil to a distance not less than 50 mtr all as specified and directed. |
| 107 | S&F in replacement 6 Sqmm twin core PVC insulated cable 1100 volts grade, single strand aluminium conductor cable drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories laid underground on earth for making electrical connections of lights any description including necessary excavation and earth work not less than 30cms deep in any type of soil complete including returning filling and removal of excavted soil to a distance not less than 50 mtr all as specified and directed. |
| 108 | M&L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate to less than 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thikcness of 15 cm connected to GI earth strip 25x4 mm by means of nuts, bolts and washers to earth plate at one end and other end to contineous GI strip etc. including check nuts of GI and protction by the GI pipe light grade 40 mm nominal bore for earth strip from earth plate to 1500 mm above GL with FI clamps made out of 25x3mm fitted with nuts, bolts and washers and 2.5 m long watering pipe light grade of 20 mm nominal bore , 0.63 mm thick CI funnel, wiremesh, etc. complete including necessary earth work and excavation in soft/loose soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100 mm c/c both ways, earth phophrous bronze testing point , making good etc. all as specified and shown in electrical plate of SSR- Part-I. |
| 109 | Supply, installing, testing and commissioning factory made and tested CPRI approved LT Panel Outdoor type ,floor mounted type of suitable size and suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic copper bus bars of capacity 200 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, and made out of 3.15 mm thick CRCA mild steel sheet floor mounted type, front opening type with aprons for cable entry, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade complete all as specified and directed by Engineer-in-Charge.. The scope of work also comprising of the following:- BUS BAR CHAMBER:- (a) 200 Amp TPN, copper conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER:- (i) Volt Meter,96mm,flush type rated 0-500V, Digital type with Volt Meter selector switch- 01 Set. (ii) Amp Meter, 96mm, flush type rated 0-100A, Digital type with suitable size C.T's, and Amp Selector switch- 01 Set (iii) RYB Phase indicating light LED type with MCB 2A SP C Series- 1 Set of three. INCOMING:- (i) MCCB 100 Amps 25 KA , 4 Pole with adjustable thermal magnetic release=01 NoOUTGOING:- (i) MCB DP 240 Volts, 32 amps 10KA, C series-06 Nos. (ii) MCB DP 10 amps, 240 volts, 32 amps stair case/ common area light-02 Nos. (iii) All connectino should be connected through Thimbel/bottle lugs Note: (i) Space for provn of 06Nos of single phase KWH energy meter should available in LT panel. (ii) All out going feeder should be marked with quarter number. (iii) existing eletric KWH energy meter retrieved from old panel should be re fix to new panel. (iv) DMC connector for outgoing submain-06 Nos. (v) Panel wiring for control circuit with copper flexible 1.5sqmm & power wiring minimum 10sg mm flexible. (vi) Rate quoted are deemed to be inclusive of all the fixture/fittings cater above. |
| 110 | Supply and fixing LED Bollard integral decorative with PMMA diffuser 10 watt of height not less than 0.6 meter with IP 65 protection suitable for single phase 230 volts 50 HZ AC Supply including LED bulb , Poles, service wire and cement work complete all as specified and directed by Engineer-in-Charge. |
| 111 | Supply and fixing new generation, post top energy saving environmently friendly 25W , long life aesthetically designed with symmetrical light distribuiton spun aluminium landscape luminaire with high power LED as light sources. |
| 112 | Supply only SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 60 cm long with brass nuts and rubber washers complete all as specified and directed. |
| 113 | Supply only heating element of 2 KW any type with nut bolt washer complete all as directed. |
| 114 | Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed. |
| 115 | Supply only replacement of capacitor 1.5 Mfd, 240 V complete all as specified and directed. |
| 116 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender