Tender For Repair/ Replacement Of Doors, Wardrobe With Wpc Shutter And Ceiling Work In Dk-I In The Area Of Age B/R-I Including Petty Repair & Misc E/M Works At Church Road, Gym Road, Kandhar Line, 61 Cav, 48 Mvh, Sqae, Bed College, 105 Ta, 202 Cedu,
Tender Value
45 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
13 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Doors, Wardrobe With Wpc Shutter And Ceiling Work In Dk-I In The Area Of Age B/R-I Including Petty Repair & Misc E/M Works At Church Road, Gym Road, Kandhar Line, 61 Cav, 48 Mvh, Sqae, Bed College, 105 Ta, 202 Cedu, Cerr Bty, Ciu, Sabre Mess, Karan Vihar, Church Road Area And Adjoining Areas Of Bath Road Under Ge Central Delhi Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) |
| 2 | Taking down shutter of area exc 1.00 Sqm but n exc 2.00 Sqm each Resecuring & easing or adjusting without taking down of shutter complete all as specified and directed |
| 3 | Plain, solid, straight chowkats and frames made out of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.,complete as specified by the manufacturer and as per directions of Engineer-in-charge |
| 5 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge |
| 6 | S & F Glazed and skelton shutters 35mm open rebated and prepared to receive glass, gauge etc edges of framing plain champered or rounded fitted with cut & metered beads for securing glass etc sized of membane shutter as specified in SSR Part I Section 8, Clause 8.23 (a) supplied and fitted to chowkhats, 35mm thick 2nd class hard wood. |
| 7 | S&F for 30 mm thick second class hard wood plain framed factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercialtype on both sides all as directed by engineer-in-charge |
| 8 | S&F for galvanise Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed. |
| 9 | Supply and fix 300mm long, Aluminium alloy anodised, sliding door bolt matt finish snot less than 16 mm dia bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded section or cast aluminum alloy, complete all as specified. |
| 10 | Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each. |
| 11 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. |
| 12 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 13 | S&F 150mm long extruded alumiunium alloy handle fabricated type anodized (D type). |
| 14 | S&F 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete |
| 15 | S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified. |
| 16 | S&F Powder coated aluminium windows and ventilator fixed having aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips rubbers packing anodized including sheet glass 5.5 mm thick complete all as specified. |
| 17 | S&F Powder coated aluminium windows and ventilator shutters, side hung type with sash bars,purposely made for fixing window type air conditioners,exhaust fans etc;aluminium section weighing 0.55 kg/m two nos. of aluminium coated 100 mm long tower bolt,one no. 100 mm long aluminium handle , One no. 150 mm long Aluminium peg stay,two nos aluminium coated 100mm long Hinge ,rubber beading , in each window shutterscomplete all as specified. |
| 18 | S&F powder coated aluminum frame for windows/ventilators with one or more rebates including grills, jointing cleats for fixing etc complete all as specified. |
| 19 | S&F sheet glass selected quality 5.5 mm thick for aluminium windows complete all as specified . |
| 20 | Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified |
| 21 | S&F WPC board, S&F factory made 18mm thick single extruded WPC (Wood Polymer Composit) Solid Board having density not less than 600 kg/ Cbm one side white and other side of board laminated with PVC Foil including finishing all edges at all level for making edge lipping /beading or .. 50 mm thick PVC sheet lipping at all 4 edgesusing binding tape, Solvent, screws, stainless steel, Piano hinges / self closives box type hinges etc Manufactured by ISO 9001-2008 certified company. |
| 22 | S&F Hasp and staple, 100mm size, safety type, aluminium anodised brass hinge pin including bolt to hinge plate & fixed with screws, complete all as specified. |
| 23 | S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified. |
| 24 | Dismantling false ceiling boards any description and in any position incl frame work. |
| 25 | Providing & fixing false ceiling with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG False ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick(galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- |
| 26 | Checking electrical points for continuous electric supply system and replacement of unserviceable spares for all electrical fixtures, ceiling/exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening of loose wires, any type renewal of small pieces of electric wire as per suitable length and maintenance work complete on all working days including Sunday & holidays all as directed by Engr-in-charge. Note :: Item Ser No Fom 28 to 77 & Ser No 85 to 110 come under this complaints |
| 27 | Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable spares, burnt copper wire connections wherever required and repairing any type of switch, socket, plug top etc complete all as specified and directed. Note :: Item Ser No Fom 59 to 65come under this complaints Notes for Item No. 26 and 27.(a) Supply only spares shall be measured and paid under relevant item (b) Contractors are advised to visit the sites before quoting their rates.(c) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one wee from the date of issue of work order. (d) Contractor shall provide and deploy adequate experienced Exp. professional to carry out day to day complaints and and mush deploy 02 Electrcian & 02 Helper at Bath Road complaint cell Cell from 9:00 Hrs to 1700 Hrs from Monday to Sunday. In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holidayday//night time also. The rates quoted in scdule, respective items shall be deemed to be included and nothing extra shall be admissible on this account.Note:whatever be the nature of electrcal complaint the wholesole rectification responsibilty lies with the contractor. (e) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 8 hours.(f) All Ser Numbered complaints dockets will be provided by contractor amount of dockets include this. (g) Daily attendance register will be maintained by the concened JE E/M & if any electician/helpe found asent on any woking day then penalty @ Rs 1000/- per day per workman will be recoveed fom the contactor. |
| 28 | Supply only in replacement switch piano flush button type single pole one way 6 Amps all as specified. |
| 29 | Supply only only in replacement switch piano 6 amp SP two way, ISI marked. |
| 30 | Supply only only in replacement socket piano outlet 6 Amp flush button type all as specified. |
| 31 | Supply only only in replacement switch piano flush button type single pole 16 Amps. |
| 32 | Supply only in replacement socket piano outlet, 2 in 1, 3 pin 6/ 16 Amp Flush type single pole. |
| 33 | Supply only in repairs bell push single pole 6 Amps all as specified. |
| 34 | Supply only in replacement switch socket combination, box type flush button type 6 Amps. |
| 35 | Supply only in replacement switch socket combination, box type flush button type 6/16 Amps. |
| 36 | Supply only in repairs Ceiling fan regulator electronic step switch type/socket type, suitable for 1200/1400 mm sweep ceiling fan, 230 Volts single phase complete. |
| 37 | Supply only in repairs switch Modular type 6 Amps one way 230V AC complete all as specified and directed by Engineer in charge. |
| 38 | Supply only in repairs switch Modular type 6 Amps two way 230V AC complete all as specified and directed by Engineer in charge. |
| 39 | Supply only in repairs Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete all as specified and directed by Engineer in charge. |
| 40 | Supply only in repairs Modular socket outlet 5 pin 6 Amp socket 2 moduler complete all as specified and directed by Engineer in charge. |
| 41 | Supply only in repairs switch Modular type 16 Amps one way 230V AC complete all as specified and directed by Engineer in charge. |
| 42 | Supply only in repairs Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge. |
| 43 | Supply only in repairs Modular five stepped type electronic fan regulator 1/2 module 230V AC complete all as specified and directed by Engineer in charge. |
| 44 | Supply only in repairs ceiling rose surface PVC type with three terminals. |
| 45 | Supply only in repairs Electric bell Ding-Dong AC 230 Volt etc complete all as specified and directed. |
| 46 | Supply only in repairs insulated body, angle holder (metal ring) with back plate ISI marked complete all as directed. |
| 47 | Supply only in repairs industrial metal clad, plug top, 3 pin, 10 Aamp (ISI marked) as directed. |
| 48 | Supply only in repairs industrial metal clad socket 3 pin 20 Amp (ISI marked) as directed. |
| 49 | Supply only in repairs plug top 6 Amps 3 pin 230- volts. |
| 50 | Supply only in repairs plug top 16 Amps 3 pin 230- volts. |
| 51 | Supply only in replacement LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 52 | Supply only in replacement LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 53 | Supply only in replacement 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP-65 Protection, System level efficacy of the Luminary is > 100 lumen/watts, Power Factor > 0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-5700K, Surge protection of 2.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete |
| 54 | Supply only in replacement surface ceiling mounted, round/square LED down light fittinground/square LED down light fitting as per requirement at site 10/12 watts, system wattage of 10/12W, system efficacy at luminary level ≥ 80 Lumens/watt, 5700K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete. |
| 55 | Supply and fix recess ceiling mounted, round/square LED down light fitting as per requirement at site 10/12 watts with die cast aluminium housing and system wattage of 10/12W, system efficacy at luminary level ≥ 80 Lumens/watt, 5700K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete. |
| 56 | Supply only in replacement recessed mounting LED FLAT panel 2'x2' made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20, System level efficacy of the Luminary is > 100 lumen/watts, Power Factor > 0.90, driver with Voltage range 150-270V, Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed. |
| 57 | Supply only in repairs of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x12 watt LED bulb B22 base Note: rate quoted one piece of 12 watts LED bulb included in the fitting . Make:- Philips/Wipro/Jaquar |
| 58 | Supply only in repairs 15 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz complete all as specified & directed |
| 59 | Supply only in repairs 12 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz,complete all as specified & directed |
| 60 | Supply only in repairs MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete. |
| 61 | Supply only in repairs MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete. |
| 62 | Supply only in repairs MCB DP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete. |
| 63 | Supply only in repairs MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting. |
| 64 | Supply only in repairs MCCB 125 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting. |
| 65 | Supply only in repairs MCCB 100 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting. |
| 66 | Supplu only in repairs fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge. |
| 67 | Supply only in repairs exhaust fans AC single phase 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with louvers for fixing of exhaust fan complete. |
| 68 | Supply only in repairs PVC Gang box surface type heavy duty suitable for single switch 6 Amps (ISI Marked). |
| 69 | Supply only in repairs Gang box surface type heavy duty suitasble for 15 Amps switch and socket (ISI Marked) |
| 70 | Supply only in repairs white cover plate with frame 1 module/ 2 module complete all as specified and directed by Engineer in charge. |
| 71 | Supply only in repairs white cover plate with frame 3 module complete all as specified and directed by Engineer in charge. |
| 72 | Supply only in repairs t white cover plate with frame 6 module complete all as specified and directed by Engineer in charge. |
| 73 | Supply only in replacement hylem sheets 3 mm thick (ISI marked) of the following sizes :- Make :-As per sample. |
| 74 | Sheet 4\\" x 4\\" single cutting suitable for one piano switch |
| 75 | Sheet 4\\" x 4\\" two cuttings suitable for two piano switches |
| 76 | Sheet 4\\" x 7\\" three cuttings suitable for three piano switches |
| 77 | Sheet 4\\" x 7\\" one cutting for 6 Amp socket and two cuttings for piano switches |
| 78 | Sheet 8\\" x 10\\" incl cuttings for switches and sockets 6/16Amps as directed. |
| 79 | Sheet 10\\" x 12\\" incl cuttings for switches and sockets 6/16Amps as directed. |
| 80 | Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed. |
| 81 | Supply only replacement of capacitor 1.5 Mfd, 240 V complete all as specified and directed. |
| 82 | Supply only replacement hole fastner madeup of MS 6\\" long with complete nut bolt all as specified.Make:as per sample |
| 83 | Supply only replacement hole fastner madeup of MS 4\\" long with complete nut bolt all as specified.Make:as per sample |
| 84 | Supply only replacement heating element of 2 KW any type, any size and any make make with nut bolt washer complete all as directed. |
| 85 | Supply only replacement non return valve 15mm dia (ISI Marked) for geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed. |
| 86 | Supply only in repairs for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge. |
| 87 | Supply only replacement thermostat for 25/35/50 ltrs capacity of geysers complete all as directed. |
| 88 | Supply only repairs SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 60 cm long with brass nuts and rubber washers complete all as specified and directed. |
| 89 | Supply only in replacement modular mini AC box with MCB 20 Amp complete with metal box and 3 Pin, 15 Amps plug top complete all as specified and directed. Make : Indo Asian/Havells/Legrand/ABB Note : Rates are inclusive of cutting / chases for mounting Modular metal box concealed in wall and making good to the disturbed surfaces with OBD / colour wash / white wash and wall putty where ever is required. |
| 90 | Supply only in replacemen water heater storage type Geyser ABS body vertical type with suitable size of fastner and including provision and connecting up of SS braidedpipe with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 2 KW and not less than 5 star rating, suitable for ,230 volt, 50 Hz electric supply complete including taking down & deposit to MES store of old unsv geyser of capacity 25 liters all as specified and directed . |
| 91 | Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 1.5 sqmm with approved colour code completed all as specified. |
| 92 | Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 2.5 sqmm with approved coloured code completed all as specified. |
| 93 | Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 4 sqmm with approved coloured code completed all as specified. |
| 94 | Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 6 sqmm with approved coloured code completed all as specified. |
| 95 | Supply only replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 10 sqmm with approved coloured code completed all as specified. |
| 96 | Supply only replacement flexible wire 3 core PVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge |
| 97 | Supply only in repairs wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge. |
| 98 | Supply only in repairs ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, including fan rod, canopy, fan regulator & remote of fan, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. |
| 99 | Supply only in replacement exhaust fan motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as directed. |
| 100 | Supply only in replacement fresh air fan motor 230 volts AC, 50 Hz suitable for 250 mm size ftesh air fan complete all as directed. |
| 101 | Supply only in replacement all accessories of PCB BLDC ceiling fan with remote any type, any make, any capacity, including taking down carefully ceiling fan & refixing the same as per requirement at site complete all as specified & directed by Engineer-in- Charge |
| 102 | Supply only in replacement fresh air fan blade any make, any capacity as requirement at site all asspecified & directed. |
| 103 | Supply only in replacement fresh air fan PVC cup/check nut as requirement at site all asspecified & directed. |
| 104 | Supply onlyin in replacement Rechargeable bulb of capacity 15 watts as requirement at site all asspecified & directed. |
| 105 | Supply only in replacement exhaust fan/water cooler motor capacity, 230 volts, AC, 50 Hz suitable for 450 mm size exhaust fan complete all as directed. |
| 106 | Supplying only in replacement 1100 volts grade 6 sqmm heavy duty stranded cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular. |
| 107 | Supply only in replacemen Rechargeable bulb of capacity 15 watts as requirement at site all asspecified & directed. |
| 108 | Supply only in replacemen outdoor type luminaire post top luminrare (prince opera midi) of 240V, 50hz of capacity 40 watt LED luminare ip 65 suitable for mounting on 6 0mm OD pipe on necessasry PCC works incl all fixing arrangaement complete all as specified and directed Make :Cat Part No : LPTO-40-CDL-M of CG or equivalent in Philips/C&S Cat Part No : LTGLC40WHPLED/W |
| 109 | Supply only in replacemen LED Bollard with round top 10 W ,220V 50Hz with opal acrylic IP 65 protection along with necessary PCC foundation cable condits for loop in and out , cable connectors complete all as specified and directed Make Cat No. LBLSN-10-CDL of Crompton graves or equivalent in Bajaj / Havells/Philips 58167 YOB PEDESTAL |
| 110 | Supply only in replacement flood light of capacity 100 watts High efficient light fitting with pressure die cast Aluminum housing and has lenses specially designed for flood Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100 lumens /watts. The color temperature is around 5700 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor >.0.9, voltage variation range 150-270V, THD<10%, High and low protection along with a surge protection of 2.5 KV including provision of suitable dia clamps, nuts, olts & washes etc for fixing the light fittings on wall fixed complete as specified and directed. |
| 111 | M & L for servicing of AC induction motor with high pressure pump set and re-install same after painting the pump including the pipe connection to its at inlet & outlet inside the pume house complete, overhauling / Repair of complete pumpset of 5 HP capacitywith suitable size single phase electric motor coupled to pump with V belt and pulley incluiding common iron frame Including disconnection of electric & water connections and transportation to workshop if required as per site after replacement of below mentioned spare will be measured and paid separately complete all as specified and directed by Engr in charge. |
| 112 | Supply Only Bearing Size suitable for as per sample complete all as specified and directed by Engr in charge. |
| 113 | Supply Only Bearing cover complete all as specified and directed by Engr in charge. |
| 114 | Supply Only Gland packing of size 8x8mm complete all as specified and directed by Engr in charge. . |
| 115 | Supply Only Grease white complete all as specified and directed by Engr in charge. . |
| 116 | Supply Only cuppling for motor with pump set complete set as per sample complete all as specified and directed by Engr in charge. |
| 117 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender