Tender For Various Civil Maintenance Work At 220Kv Sub Station Sukha Mpptcl Jabalpur
Tender Value
39.52 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
79040
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Various Civil Maintenance Work At 220Kv Sub Station Sukha Mpptcl Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | 220kv sub station sukha MPPTCL Jabalpur |
| 2 | 2.6, 3011472, Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 3 | 2.5, 3011471, Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil |
| 4 | 206 NSOR, 4000308, RCC Cable trench at Road Crossing D Type Construction of civil work as per Standard drawings and details mentioned in SMB vide page No. Vol-II/P- 53to 56 |
| 5 | 4.1.1.3, 3011576, \\"Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :.With 20mm nominal size graded stone aggregate..M-15 - Grade concrete\\" |
| 6 | NSOR No. 285, 3011274, \\"Providing and laying mixture of stone crusher dust (free form organic matters and foreign matters etc.) and Cement in a ratio of 1:10 (1Part Cement :10 part stone crusher dust by volume) of minimum thickness of 100mm and with provision of ground water recharging holes of 100 mm dia and at 3000 mm c/c or at suitable intervals as per site requirement in zigzag pattern with the help of fixing 100 mm dia PVC pipes, including cost of pipes, preparation of surface, mixing of stone crusher dust and cement in concrete mixer with desired water cement ratio, laying, vibration, compaction, curing etc. complete to give a perfect cohesive, smooth and even surface, finishing as per requirement, cleaning, etc, complete and also inclusive of all leads and lifts and cost of all materials, transportation, royalty charges (it any) taxes, levies, labour charges, T&P and cost of other consumables etc. all complete and as per direction of Engineer-In-Charge Note :- 1) This items shall not be executed in case of hard strata i.e. hard rock, soft rock, ordinary rock etc if exists on surface of substation yards. 2) The quantity of stone crusher dust shall be measured in volumetric terms so as to exercise cross check. \\" |
| 7 | 14 NSOR, 3000112, Excavation , Reclaiming & Screening of previously spreaded 40 mm metal as per requirement in yard . Work includes removal of previously spreaded metal ( the excavation upto required depth will be done and all vegetation, roots shall be removed and the soil so obtained shall be cleared of all vegetation , roots and foreign material and will be relaid in the yard and well compacted with light rollers so as to attain the optimum compaction ). The above activities include collection of metal at suitable place, uprooting of vegetation and clearing of all foreign material etc., screening with sieve so as to remove all dust and small particles to get specified 40 mm metal , stacking the same at suitable place after sieving for measurment purpose and will be respread in the yard in desired thickness . The rate includes all labour and T&P, lead & lift etc. complete as per direction of Engineer in charge. |
| 8 | 8 NSOR , 3000106, Supply,stacking and spreading of 40 mm crusher broken metal black trap, basalt or granite uniformly in substation yard in desired thickness, free from dust and foreign matter,including transportation up to site, lead and lift, T&P, labour,royalty and taxes etc. complete as directed by Engineer-in-charge. |
| 9 | 11.72.3, 3012750, \\"\\"Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658- 2006 made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the bedding layer through vibratory compaction byusing plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand including locking with M15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications and direction of Engineer-in-Charge...60 mm thick C.C. paver block of M-30 grade.\\" |
| 10 | 210 NSOR, 4000312, RCC Road Construction of civil work as per Standard drawings and details mentioned in SMB vide page No Vol-II/P-64 to 66 |
| 11 | 18.28, 3014134, Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 12 | 10.22.1, 3012546, \\"Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required...In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.\\" |
| 13 | 13.64, 3013112, Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 14 | 10.1, 3012505, Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 15 | 18.7.1, 3013851, \\"\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe and fittings with onestep CPVC solvent cement, trenching, refilling andtesting of joints complete as per direction of Engineer-in- Charge..External Work..15 mm nominal outer dia .Pipes..\\" |
| 16 | 18.7.2, 3013852, \\"\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe and fittings with onestep CPVC solvent cement, trenching, refilling andtesting of joints complete as per direction of Engineer-in- Charge..External Work..20 mm nominal outer dia. Pipes..\\" |
| 17 | 18.7.5, 3013855, \\"\\"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe and fittings with onestep CPVC solvent cement, trenching, refilling andtesting of joints complete as per direction of Engineer-in- Charge..External Work..40 mm nominal outer dia .Pipes. |
| 18 | 18.51.4, 3014173,\\"Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball...40mm nominal bore, 206mm long. Weighing not less than 690 gms.\\" |
| 19 | 18.44.1, 3014154, \\"Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :..Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore...86 mm long weighing not less than 88 gm\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender