Tender For Providing Open Well At Velighanakulam And Construction Of Pumproom And Pumping Line In Kumarapuram Town Panchayat
Tender Value
30 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
7 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Open Well At Velighanakulam And Construction Of Pumproom And Pumping Line In Kumarapuram Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soilsetc., complete as per standard specification |
| 2 | Sinking of well below water level including all incidental charges using special tools and plants such as air compressor helmet etc complete(5.00m internal dia) |
| 3 | 1st depth of 2.00m |
| 4 | 2nd depth of 2.00m |
| 5 | 3rd depth of 2.00m |
| 6 | 4th depth of 2.00m |
| 7 | Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification |
| 8 | Square colum |
| 9 | Curved surface |
| 10 | Porous concrete using 20mm pebbles and cement mixing 1:4 including cost and conveyance of all materials and labour charges etc complete |
| 11 | Reinforced cement concrete 1:11/2:3 (one cement one and half sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification as per TNDSS NO: 30 V,VI (S3) VII-3 |
| 12 | Plastering in cement mortar 1:3 (one cement Three sand) using 20mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification |
| 13 | Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. TNDSS NO: 97 V,VI (S6) VII (S6) VII-3 |
| 14 | Supply and delivery of Three phase submersible pumpset suitable for 150 mm dia openwell as per IS 8034/1989 without panel board 75 Ipm x 225 m head including all labour charges etc. complete 7.5 HP |
| 15 | Supply and delivery of wall mounting type control panel board consisting of Ammeter, Voltmeter, Single phase Preventer, Isolator, indicating lamps Star Delta with two level guard and auto starter suitable for pumpset including all taxe etc. complete. |
| 16 | Labour charges for erection of 7.5HP submersible pumpset in the borewell including fixing and jointing of submersible cable with proper clamps up to starter to the required depth and also fixing of riser pipe to the required depth valves erection clamps pressur gauge up to the exterior wall of the pump room and erection of panel board consists of TPICN switch, ammeter voltmeter three pilot lamps capacitor single phasing preventer water level guard and laying and jointing of cable and TWIN earthing as per IE Rules etc complete and testing the pumpset and trair run for 10 days etc complete |
| 17 | Supplying & filling up the empty Cement gunny bags with sand, stitching them conveying the same to site and stacking as directed within a lead of 10m excluding cost of bags, jute, thread, needle, sand etc |
| 18 | Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) (SD-18) |
| 19 | Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 6sq.mm copper wire with painting of suitable colour (SD-52) |
| 20 | Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only (SD-150) |
| 21 | Supply and fixing of 16A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with earth connection only (SD-146) |
| 22 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuseunit (500V) 32A neutral link and earthlink (1\\" x 1/8\\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Double Pole RCD / RCCB (Lower End) with suitable necessary connection (SD-126) |
| 23 | Drilling of borewells of size 4\\" to 5\\" dia. in sedimentary formation using hand boreset including insertion of casing pipe etc., and supplying and packing of pebbles (Conveyance of hand bore set including loading and unloading to be done by the contractor) |
| 24 | Supply and delivery of following PVC / G.I pipes and specials confirming to IS Specification with ISI Marking etc complete |
| 25 | 50mm GI Pipe B Class |
| 26 | 50mm GM Gate valve |
| 27 | 50mm GM Non return valve |
| 28 | 50mm GI Elbow |
| 29 | 50mm GI Pipe nipple |
| 30 | 50mm GI Coupling |
| 31 | 50mm MS Clamp |
| 32 | 50mm GI Tee |
| 33 | 32mm pvc pipe 10ksc |
| 34 | 4 sq.mm Submersible cable |
| 35 | 90mm PVC pipe |
| 36 | 90mm PVC coupler |
| 37 | 90mm PVC bend |
| 38 | 90mm PVC Tee |
| 39 | 80 mm GI pipe |
| 40 | 80 mm GI elbow |
| 41 | 80 mm GI coupling |
| 42 | 80 mm GI flange set |
| 43 | Earth work excavation and depositing on bank withan initial lead and lift in hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth, earth mixed with small size boulders for laying ofpipe line including refilling the trench with excavated earth of size 1.00mx0.60mx1.05m etc complete (Linear measurement) WO-WO704 |
| 44 | Lowering of following pipes and specials to trench and laying to proper grade and alignment jointing with pvc coupler with cement paste and testing to the required pressure including conveyance of water for filling during testing etc complete (Item no 8b of TWAD schedule of rate) |
| 45 | 32mm PVC Pipe 10ksc |
| 46 | 90mm PVC pipe |
| 47 | Plain cement concrete Using 1:4:8 mix (One cement, four Sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V.VI (S5A) VII |
| 48 | Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification 10m2 as per TNDSS & Morth specification No:30 & 36 (Plain surface) |
| 49 | Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification 10m2 as per TNDSS & Morth specification No:30 & 36 (Retaining wall) |
| 50 | Plain Cement Concrete 1:3:6 Mix (one cement, three Sand and six aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.. TNDSS NO: 24 |
| 51 | Plastering in cement mortar 1:4 (one cement Four sand) using 12mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification. [MORTH Specification: Clause:1000/1300] |
| 52 | Supply, collection and filling of Quarry Rubbish from approved quarry including all cost and conveyance to site, stacking them on road side to departmental gauge for the take premeasurement. Each layer not more than 15cm thick and consolidation properly etc complete. TNDSS No : 301 & 305 |
| 53 | Plain Cement concrete 1:2:4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per standard specifications. TNDSS NO: 30 V,VI (S3) VII-3 |
| 54 | Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of III class Country bricks of size (8 3/4\\"x4 1/4\\"x 2 3/4\\") for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification TNDSS specification No.31 & 31C. |
| 55 | Supply and fixing of RCC precast slab in cement concrete 1:2:4 mix ( One cement two sand four aggregate ) using 20mm ISS metal including cost of moulding charges mixing laying and curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification but excluding cost of rein forcement. (75mm thick) |
| 56 | Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. |
| 57 | Supplying and fixing of steel door including cost and conveyance and all labour charges etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender