Tender For Watersupply Fund 2026-27, Repair And Maintenance Works To Borewell Submersible Motor,Starter & Panel Board, Compressor & Motor, Remove And Refixing Stuckup Motor Work , Flushing Of Borewell, Electrical Arrangement At Ward No: 1 To 18 In Ti
Tender Value
6 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
16 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Namakkal → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Watersupply Fund 2026-27, Repair And Maintenance Works To Borewell Submersible Motor,Starter & Panel Board, Compressor & Motor, Remove And Refixing Stuckup Motor Work , Flushing Of Borewell, Electrical Arrangement At Ward No: 1 To 18 In Tiruchengode Municipal Limit.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery and fixing of 2.5sqmm. Cable PVC insulated and sheathed 3 core flat type copper confiming to Is 694/1990 including labour charges etc., complete and as directed by the departmental officers. |
| 2 | Supply and delivery and fixing of 4 sqmm. Cable PVC insulated and sheathed 3 core flat type copper confiming to Is 694/1990 including labour charges etc., complete and as directed by the departmental officers. |
| 3 | Laying of GI Pipes and Specials to proper line and level including jointing but excluding cost of Pipes and jointing materials for plumbing works for providing water supply arrangements etc.,complete. |
| 4 | 11/2\\" GI Pipe |
| 5 | Supply and delivery and fixing of spares for borewell motors & pumps including cost of all at site etc., Complete labour charges etc., complete. |
| 6 | 63 Amps Porcelain fuse unit (500 V) |
| 7 | Supply and delivery and fixing of spares for borewell motors & pumps including cost of all at site etc., Complete( Local Market Rate) and as directed by Departmental Officers. . |
| 8 | Machining |
| 9 | 50mm GM Non return valve |
| 10 | Pump IB |
| 11 | Motor housing |
| 12 | Cable card |
| 13 | Stainer |
| 14 | Pump patta |
| 15 | SS Pump sleve |
| 16 | Pumpshaft |
| 17 | Circlip |
| 18 | Carbon pad |
| 19 | Segment set |
| 20 | Welding & Lath works |
| 21 | Pump rubber push |
| 22 | Motor Thrust Bearing |
| 23 | Pump Impeller (Per stage) |
| 24 | GM Pump Push |
| 25 | Oil seal |
| 26 | MV Conductor |
| 27 | M10 Stud |
| 28 | Supply and delivery and fixing of following spares for panal board etc., Complete, and as directed by the Departmental officers. |
| 29 | 16 Amps BCH contractor Knop set |
| 30 | 13 to 21 Amps BCH relay |
| 31 | Contractor Kit |
| 32 | Volts meter |
| 33 | Amps meter |
| 34 | Labour charges for Starter & Pannel Board service work & Small works etc., Complete, and as directed by the Departmental officers. |
| 35 | Supply and delivery and fixing of spares for compressor and motor including cost of all at side etc., Complete labour charges etc., complete. |
| 36 | Rings |
| 37 | Piston |
| 38 | Blade |
| 39 | Connecting rod beaing |
| 40 | Oil seal |
| 41 | Oil (1 Liter Pack) |
| 42 | Oil guage |
| 43 | Connecting push |
| 44 | 5 HP terminal plate |
| 45 | Filter set |
| 46 | Connecting pin |
| 47 | Bearing |
| 48 | Labour charges for fixing of compressor and motor spares and servicing as as Directed by the Departmental officers. |
| 49 | Removing of bore well / open well submesible motor upto 5HP into the Borewell etc., Complete labour charges etc., complete. |
| 50 | Removing of bore well/open well submersible motor Above 5 HP to 10 HP the borewell etc., Complete labour charges etc., complete. |
| 51 | Refixing of bore well / open well submesible motor upto 5HP into the Borewell etc., Complete labour charges etc., complete. |
| 52 | Refixing of bore well/open well submersible motor Above 5 HP to 10 HP the borewell etc., Complete labour charges etc., complete. |
| 53 | Rewinding of coil in the old upto 5 HP submersible motor etc., Complete and as Directed by the Departmental officers. |
| 54 | Rewinding of coil in the old 5HP to 10HP submersible motor etc., Complete and as Directed by the Departmental officers. |
| 55 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., 1 |
| 56 | Supply delivery and fixing of (four pole 63A,10KA) Miniature Circuit Breakers 240v/415v 50HZ-AC Supply suitable for Both lighting and motor circuits.Legrand/Hager etc complete., (PWD 2025-26) |
| 57 | Supply delivery and fixing of 32 Amps Porcelain fuse unit (500 V)(Anchor/Equivalent) etc complete., (PWD 2025-26) |
| 58 | Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains etc. ( SD 67) |
| 59 | Supply,delivery and fixing of Earth set, earth link 1\\"x1/8\\" flat with bolt nut accessories etc complete., |
| 60 | Supply delivery and fixing of MS box of 30 cmx20cmx l0cm with angle iron frame work for housing the condensor, choke fuse unit SP switch with lock and Key arrangements. SD 98 |
| 61 | Supply delivery and fixing of TW Plank of size 600mmx450mmx19mm with supporting reepers of 1\\" thick on both side with painting and with bolt and nut and washer etc complete., SD 128 |
| 62 | Supply delivery and fixing of MS BOX For size 200 x 150 x 75 mm 4/3 Pole MCB With proper shape and fitting arrangements,and including all labour charges etc complete., |
| 63 | Towards the charges for submersible stuck up motor in the borewell including cost of labour and maintenance for removing the stuck up motor pumpset upto 5HP/7.5HP/10HP etc complete as per standard specifications. |
| 64 | Rate for flushing of borewell of 6\\" dia requiring less than 4 hours operation using drill rods/ hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the TWAD Officer and conducting yield test by 'V' notch method if required. |
| 65 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 66 | Upto 5 HP |
| 67 | Above 5.00 HP to 10.00 HP |
| 68 | Supply delivery and erection of 40mm dia UPVC Column Pipe inner the borewell including all labour charges etc complete., |
| 69 | Supply delivery and erection of 50mm HDPE PIPES FOR SUB-MERSIBLE PUMP IN BOREWELL Class-5 (1 MPa or 10 kg./cm2 pressure) |
| 70 | Supply delivery and following 40mm dia G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 etc complete., |
| 71 | Bore cap using M.S. Flat of size 1 cm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position(Bore caps with M.S. Couplings need not be made) 6\\" Pipes |
| 72 | Towards the charges for deduction of old scrap materials etc complete as per standard specifications. |
| 73 | add GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender