Tender For Conversion Of Existing Godown No.07 Into Indoor Badminton Court At Alhw Residential Colony Store Complex In Sri Vijaya Puram.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Aug 2026
15 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conversion Of Existing Godown No.07 Into Indoor Badminton Court At Alhw Residential Colony Store Complex In Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges , hips valleys and gutters etc. and stacking the material within 50 metres lead, cost of all labour charges, minor tools , labour welfare cess, GST etc, complete. |
| 2 | Dismantling cement concrete 1:3:6 or richer mix including disposal of dismantled materials.Including cost of all labour charges,minor tools etc. complete. |
| 3 | Demolishing Hollow Block Masonry work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge, cost of all labour charges, minor tools , labour welfare cess, GST etc, complete. |
| 4 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - incharge, , cost of all labour charges, minor tools , labour welfare cess, GST etc, complete. |
| 5 | Dismantling steel work in built up sections , Truss in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismenbering and stacking within 50 metres lead.including cost of all labour charges , cost of minor tools, GST, labour welfare cess etc. complete. |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead ,including cost of all labour charges , cost of minor tools, GST, labour welfare cess etc. completeOf area 3 sq. metres and below |
| 7 | Earth work Excavation in foundation trenches in saturated soil for column and plinth etc, in all type of soil with a lead up to 100 mtr and lift up to 1.5 mtr including stacking the excavted earth not more than 3 mtr from the edge of excavation and then returning the stacked soil in 15 cm layers when required in plinths and sides of the foundation, etc, including cost of all labour charges, minor tools, GST,LWC etc, complete. |
| 8 | Supplying and filling in plinth with Quarry dust under floors including, watering , rammimg consolidating and dressing including quarry dust, cost of transportation charges of all material to work site, all labour charges, GST, LWC, minnor tools etc, complete. |
| 9 | Providing and laying cement concrete 1:3:6 (one cement, three mainland river sand and six stone metal of 40mm size of local quarry) for below footing, plinth beam, etc as directed by the EIC, including cost of nominal centering & shuttering charges, cost of cement, mainland river sand, stone metal, screening & washing of both the aggregate, mixing, placing, curing, GST,LWC,etc,complete. |
| 10 | Providing form work including centering & shuttering so as to give a rough finish, strutting and propping etc, and removal of the same from reinforced cement concrete and plain concrete work as directed by the EIC, including cost of centering and shuttering, all LWC, GST, cost of binding materials, cost of transportation charges of all material to work site, cost of ballies, cost of minor tools, etc, complete. |
| 11 | Providing and laying RCC 1:1.5:3 with 20mm size stone chips (one cement, one and half mainland river sand & three stone chips of size 2 cm graded) in all RCC works as directed by the EIC, including cost of cement, stone chips and mainland river sand, screening and washing of both the aggregates, mixing concrete, conveying the concrete, placing in position, consolidation with vibrator, curing, all labour charges, transportation charges of all materials to work site, cost of minor tools, hire charges of mixer machine and vibrator, GST, LWC etc,complete. |
| 12 | Providing and fixing Tor steel reinforcement for RCC work including cutting, bending, bindingand placing in position cost of binding wire, minor tools etc, complete. The rate is inclusive of consumable items and GST & LWC.etc,complete. |
| 13 | Providing and fixing 20 cm thick masonary with Hollow block of size 0.40 X 0.20 X 0.20cm cast with Cement concrete 1:3:6 (one cement, three quarry dust and six 11.2 mm stone chips), curing, fixing with CM 1:4 in walls , including cost of quarry dust, all labour charges for casting,curing, walling,hire charges of Hollow block casting machine,cost of timber pallets, excluding cost of cement which will be supplied free of cost at AHW store, and including transportation charges of all materials to work site, all labour charges minor tools etc complete. |
| 14 | Providing and laying 12mm cement plaster of mix 1:4 (1 cement, 4 mainland river sand) including cost of cement, river sand, all labour charges, cost of minor tools, transportation charges, scaffolding charges, GST, LWC etc, complete. |
| 15 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 16 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 17 | Applying one coat of cement primer of approved brand manufacture on walls surface including cost of cement primer, brushes, scaffolding arrangements, transportation charges, all labour charges,minor tools, etc, complete. The rate is inclusive of consumable items and GST & LWC. |
| 18 | Painting two coats over old wall with plastic emulsion paint of approved brand of required colour and manufacturer as directed by EIC of required colour and manufacturer to give an even shade at all locations, preparation of surface including cleaning, scrapping of the existing painted surface, cost of emulsion paint, brushes, scaffolding arrangements, transportation charges, all labour charges, minor tools, GST, LWC, etc complete. |
| 19 | Painting two coat of 1st quality exterior emulsion antifungal paint of approved brand and manufacture heavily undercoated texture of old surface to give an even shade including cost of paint cost of other materials, scaffolding arrangement, scrapping of existing paint surface wherever required, all labour charges, cost of minor tools, transportation charges, scaffolding charges, LWC including GST, etc, complete. |
| 20 | Providing and laying damp-proof course 40mm thick with cement concrete1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) wherever required, all labour charges, cost of minor tools, transportation charges, scaffolding charges, LWC including GST, etc, complete. |
| 21 | Cement concrete flooring 1:2:4 (1 cement, 2 Pulverised Stone Sand, 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of mising of steps etc. compete.50mm thick with 20mm nominal size stone aggregate |
| 22 | Providing and fixing anodised aluminimum work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285, anodised transparent or dyed to required shade according to IS 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws of with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and skles with required PVC / neoprene felt etc.. aluminimum sections shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminumum strap beading for glazing / pannelling, CP brass / stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing and panneling to be paid for separately). For Fixed Portion. |
| 23 | Providng and fixing glazing in aluminium door, window, ventilator, shutter and partition etc, with PVC neoprene gasket etc, complete as per the architectural drawings and the direction of EIC (cost of aluminium snap beading shall be paid in basic item) including cost f allmaterials, labour charges, minor tools & plants, LWC, GST, etc, completeWith glass panes of 5.5 mm thickness (weight not less than 10.00 Kg/Sqm) |
| 24 | Providing and fixing pre-coated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05%), total coated thickness with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polester top coat 15-18 microns. Sheet should have protective guard scratches during transportation and should be supplied in single length upto 12 metre or as desird by Engineer-in-charge .The sheet shall be fixed using self drilling/ self tapping screws of size (505x55m ) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces , excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required.including all labour charges, minor tools labour welfare cess, GST etc, complete. |
| 25 | Providing and fixing Aluminium rain water gutter of 24 gauge, around the roof including cutting holes and making good the same as directed by EIC, including cost of aluminium sheet, MS flat , transportation charges of all materials to work site, cost of aluminium sheet , cost of all labour charges and minor tools.The rate is inclusive of all consumable items , LWC and GST etc complete. |
| 26 | Providing and fixing Aluminium wind ties of 40 x 6mm flat section including cost fixng charges, cost of all materials, all labour charges, cost of minor tools, scaffolding charges, transportation charges, GST, LWC etc, complete. |
| 27 | Providing and fixing wood work of superior hard work(C-II) in frame of doors, windows and other frame wrought and fixed in the position as directed by EIC, including cost of timber, all labour charges, tranportation charges of all materilas nto worksite, cost of minor tools, GST, LWC etc, complete. |
| 28 | Providing and fixing pannaled or panneled and glazed shutters for doors, windows and clestory windows including black enammeled Aluminium Butt Hinge 10 Cm with necessary screws excluding pannelling which will be paid for separately, including cost of timber,transportation charges to worksite, all labour charges, minor tools, GST, LWC, etc, complete. 40mm Thick SHW |
| 29 | Providing fixing pannelling with hard wood planks for shutter doors, windows and clestory windows (Area of opening for pannel inserts excluding portions inside grovees or rebates to be measured) including cost of timber, transportation charges to work site, all labour charges, minor tools, GST, LWC etc, complete.Pannelled or pannelled and glazed shutters 25 mm to 40 mmthick. |
| 30 | Providing and fixing Door shutter items transparent or dyed to required colour or shade with nuts and screws, including, cost of all labour charges, minor tools, GST, LWC, etc, complete. |
| 31 | i) Stainless steel Hinges (IS 12817) 100 |
| 32 | ii) Sliding Door Bolt Aluminium 300 x 16 mm |
| 33 | iii) Aluminium tower bolt 200 x 10 mm |
| 34 | iv) Aluminium Handle 100 mm |
| 35 | Providing and fixing solid UPVC panalled door of ISI mark of approved brand with 3mm thick and frame provided with 5mm thick UPVC including cost of Labour charges , minor tools , transportation charges , labour wlefare cess , GST etc , complete. |
| 36 | Providing and fixing wwhite viterour chinal flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass union and G.I. clamps complete. Including painting of fittings and brackets , cutting amd making good the wall and floors wherever required .One urinal basinwith 5 litre white P.V.C automatic flushing cistern |
| 37 | Providing and fixing white vitreous china wash basin ISI marked) with CI/ MS brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pattern including painting of fitting an brackets cutting and making good the walls wherever required, transportation charges of materials to work site, all labour charges, minor tools, LWC, GST, etc, complete.Flat back wash basin size 550 x 400 mm with a single 15 mm CP brass pillar taps. |
| 38 | Providing and fixing of white vitreous China pedestal type water closet (European type WC pan) with seat and lid, CP brass hinges and rubber buffers, 10 litre low level PVC flushing cistern with fittings CI MS brackets, 40 mm dia meter flush pipe with fittings and clamps, over flow arrangement with special and mosquito proof coupling of approved municipal design including painting of fittings and brackets, cutting and making good the walls and floors wherever required (WC pan with white solid plastic seat & lid), including cost of all materials, transportation charges, minor tools, GST & LWC, etc, complete. |
| 39 | Providing and fixing 1st quality ceramic glazed wall tiles 300 x 450 conforming to ISI 5622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by EIC, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 mainland river sand) including cost of cement, mainland river sand and jointing with grey cement slurry @ 3.3 Kg per sqm, including pointing in white cement mixed with pigment of matching shade complete, including cost of cement, grey/ white cement transportation charges of all materials to worksite, all labour charges minor tools, LWC, GST, etc, complete. |
| 40 | Providing and laying 1st quality Ceramic glazed floor tiles (300 x 300 mm, thickness to be specified by the manufacturer) conforming to IS 13753 of approved make like Nitco, Orient, Somany, Kajaria, or equivalent make laid on 20 mm thick bed of cement mortar 1:4 (1 Cement, 4 mainland river sand) including pointing the joint with white cement and matching pigment, including cost of cement, grey cement, white cement transportation charges of all materials to work site, all labour charges minor tools, LWC, GST etc, complete. |
| 41 | Providing and fixing PVC septic tank of approved design and make of size of model Type-I having inside dimensions 2500mm diameter, 750mm length with 10-15 users/flushing day by day and laying tank in position and filling inside half the tank with water, including transportation etc complte as per the direction of Engineer-in-cahrgeall labour charges minor tools, LWC, GST etc, complete. |
| 42 | Constructing soak pit 1.20 x 1.20 x1.20 m filled with 40 mm coarse aggregare including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design as directed by the EIC, including cost of transportation, labour charges, minor tools, GST, LWC, etc, complete. |
| 43 | Providing and laying and fixing 110 mm dia CPVC pipe 6 Kg/cm2 from W.C. to inspection chamber including fittings of PVC pipes, bends, tees, HCI cowls vent pipe etc, wherever required as per the direction of EIC, cost of all labour charges transportation charges, minor tools, etc, complete. |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings incuding fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of EIC. (External work) |
| 45 | a) 40 mm dia CPVC Pipe |
| 46 | b) 25 mm dia CPVC Pipe |
| 47 | Providing and fixing heavy duty 15 mm dia bib cock of 1st quality including cost of bib cock, wall flange, all labour charges, transportation charges of all materials to work site and minor tools, GST, LWC, etc, complete. |
| 48 | Providing and fixing of 15 mm Pillar cock with wall flange make Jaguar or equalant including cost of angular cock, with flange all labour charges, transportation charges of all materials to work site and minor tools, GST, LWC, etc, complete. |
| 49 | Providing and fixing heavy duty 15 mm dia 2 in 1 bib cock of 1st quality including cost of bib cock, wall flange, all labour charges etc complete.As directed by the Engineer-In-charge. |
| 50 | Providing and fixing of angular cock with wall flange make Jaguar or equalant including cost of angular cock, with flange all labour charges etc complete. As directed by the Engineer-In-charge |
| 51 | Providing & fixing F8030101 stainless steel health faucet with ABS body wall hook and 1-meter PVC 0.3 to 05 micron chromium plating, impeccable surface finish of approved quality, including GST, LWC etc., complete. |
| 52 | Providing and fixing 453 x 357 mm beveled edge mirror of superior glass including cost of materials, cost of transportation charges of all materials to worksite, all labour charges, minor tools, GST, LWC, etc, complete. |
| 53 | Providing and fixing syntax tank 1000 lit capacity including cost of syntax tank fitting charges, syntax tank, all labour charges, transportation charge etc, GST, LWC, etc, complete. |
| 54 | Providing and fixing 25 mm chlorinated Polyvinyl chloride (CPVC) Tank Nipple ISI mark as per directed of EIC including cost of all material , Labour charges , minor tools , GSt, LWC, etc, complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender