Tender For Minor Civil And Electric Work (Upgaradation Of Procurement Of Heritage Assets) To Construction Of Compound Wall And Fixing Of Ms Grill Railing Around Of Temple At Marha, Gaurtha Jhansi.
Tender Value
25.21 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
13 days left
EMD
50439
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Minor Civil And Electric Work (Upgaradation Of Procurement Of Heritage Assets) To Construction Of Compound Wall And Fixing Of Ms Grill Railing Around Of Temple At Marha, Gaurtha Jhansi.
BOQ
| Sl. No. | Item Description |
| 1 | Execution of work |
| 2 | Provision for Dismantling of stone rubble masonry by manual means in cement mortar including stacking of serviceable material for reusing masonry work after proper cleaning and washing and collection of refused material within 60 mt. for further disposal of the same out of 1.00 km by mechanical transport. Including all the labour & T&P. Required proper completion at the site. |
| 3 | Provision for Earth work in excavation by manual means in foundation and floor base. (not exceeding 1.5 mt. in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. ordinary rock. |
| 4 | Providing and laying of cement concrete with mortar of ratio 1:4:8 (1 cement: 4 coarse sand : 8 stone aggregate of 20 mm nominal size) in foundation of boundary wall including ramming compacting and curing etc complete. |
| 5 | Provision for Random rubble masonry with cement mortar 1:6 (1 cement: 6 coarse sand) in foundation and plinth of boundary wall including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level etc complete. |
| 6 | Providing and laying in position specified grade of reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in plinth of wall excluding the cost of cantering, shuttering, finishing and reinforcement etc complete. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. |
| 8 | Form work of cantering and shuttering including strutting, propping etc and removal of form for roof height of 3 mtr height including labour and material etc complete for Plinth beam. |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead up to 50 m etc complete. |
| 10 | Coursed rubble masonry of boundary wall in cement mortar 1:6 (1 cement : 6 coarse sand) with hard stone (first sort) in superstructure above plinth level etc complete. |
| 11 | Provision for Coping with 50 mm thick sand stone on top of wall with 20 mm. thick bed of mortar of ratio 1:6 cement and c sand . Coping stone to be laid with fine dressing and making side end as semi circular shap (Bull nose type) etc complete including all the labour material and T&P required proper completion of work at the site. (Analysis prepared as approved before) |
| 12 | Supply and fixing of MS grill fencing on the boundary wall for safety and security of the site with MS angle 40x40x5mm vertical post and same size angle horizontal support of top middle and bottom for adjoining the frame 12 mm dia bar with arrow headed on top and placed vertically at a distance of 100mm c/c and fixed together by nut bolt etc complete as per design/drawing attached. (Grill Panel size 2.00x1.50 mtr). |
| 13 | Provision for fixing M.S. Gate with two leaf with angle iron 40x40x5 mm, flat iron 40x5 mm and 12 mm dia bars with arrow headed on top and placed vertically at a distance of 100mm c/c fabricated as per design/drawing attached including all the supply of materials fabrication and fixing of the same. Required proper completion of work at the site. |
| 14 | Flush pointing on stone work of boundary wall with cement mortar 1:3 (1 cement: 3 fine sand) including racking, cleaning and washing out joints etc complete. |
| 15 | Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel works. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 17 | Provision for fixing of STONE BENCHES of size 1.50x0.60 with 62 mm thickness finished of sand stone to be fixed with Pedestal of size 0.45x0.45 meter of thickness 12cm with PCC ratio 1:2:4 (1 Cement: 2 coarse sand: 4 stone aggregate 20mm) Including labour, material and T&P. |
| 18 | Provision for fixing of Culture Notice Board with sand stone tablet and base pillar of appropriate size as per designed by the department by engraving of letters in bilingual of suitable size. Including all supply material, finishing, engraving and fixing etc. Including all the labour, material and T&P. required proper completion of work at the site. |
| 19 | Provision for carefully shorting of architectural stone members & Sculptures (in temples heavy beams, pillars, walls etc.) Scattered surrounding in compound and outside of protected area. Including stacking of the same with proper manner. Including all the labour & T. & P. Required proper completion of work at the site. ( About 30 to 35 element to be found and display) |
| 20 | Provision for cartage and disposal of refused (from dismantling, vegetation growth, malva, garbage etc.) from monument to outside of 1.00 km by mechanical transport. Including loading, unloading cartage, disposal etc. Including all the labour and T.&P. Required proper completion of work at the site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender