Tender For Provision For Public Amenities/Repair And Maintenance Of Publication Building Area And Holding Area For Visitors At Purana Qila, Delhi
Tender Value
77.35 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
2 days left
EMD
1.54 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision For Public Amenities/Repair And Maintenance Of Publication Building Area And Holding Area For Visitors At Purana Qila, Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Taking out of wooden flooring/Plank including all charges disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge etc complete. |
| 2 | Providing and fixing plain red sand stone 60 mm (Avg) as per site requirement, after taking out of soiled, dislosed, broken & exfoliated wooden plank very carefully with the help of tools, in different sections with proper fixing of joints etc complete. |
| 3 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Dismantling kota stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 7 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 10 | Stone work (cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Red sand stone - exposed face fine dressed with rough backing : 40mm thick |
| 11 | Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.- Red sand stone |
| 12 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. 11.28.1 Red sand stone |
| 13 | Providing and laying brick aggrigate in 25 to 40 mm nominal size before laying the cement concrete etc complete. |
| 14 | \\"Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand)\\" |
| 15 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. 7.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 16 | Providing fixing of aluminium composite panel in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.on both sides fixed on M.S. structure with cutting, fitting etc. complete, for inside paneling |
| 17 | Providing and fixing waterproffing flex over the aluminium composite panel for cover area with cutting, pasting etc including all labour & material charges etc complete. |
| 18 | Providing and placing on terrace (at all floor levels Tripple layer) polyethylene water storage 1000ltr capacity tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. )(Sintex, Aquasafe or eq) |
| 19 | Electric job complete with all necessary PVC insulated copper wire, switch board, Switches, socket and all other fixtures etc complete. Sitc of MCB box with all necessary MCBs complete work for R.O. Plant and drinking water etc. |
| 20 | Provision of providing and connection of inlet from nearest source and out let pipes from building to the nearest RO plant including excavation trench , laying of pipe , and all connection etc complete PVC, CPVC etc as per requirement |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 22 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 23 | Recessed pointing the R.R. stone masonry in lime surkhi mortar 1:1:1 (1 Lime, 1 Surkhi, B.P. Sand) including racking out the joints, cleaning and washing the joints with adhesive materials such as Gur, Belgiri, Gum including Carriage of Water and Materials within a lead up to 100 M approx. |
| 24 | Provision for providing & fixing in ground level 80 L Silver Stainless Steel Swing Open Top Dustbin size 14x28 Inch (Double Pole Swing Type Dustbin) with S S powder coating as per requirement at site approved by A.S.I. |
| 25 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 26 | \\"Provision for fabrication supply and installation of the portable cabin container of size 10'x8'x8.5' using required size of ismc and MB square pipe, outside panelling, flooring, door and windows as required including fan light switches and any other type of fixtures and installation required including all the transportation charges labour and installation cost complete\\" |
| 27 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 28 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brickhoney comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5\\" |
| 29 | Desilting of mud/soil slit from Well Area near Qila-i-Kuhna Mosque with head lead upto 300 mt lead and height of 10 to 15 mtr approx upto down area portion. |
| 30 | Provision for pump out the water from the well area near Qila-i-Kuhna Mosque before desilting, then during desilting and then after desilting so that there is no difficulty in desilting including all material & labour charges as per direction of Engineer-in charge etc complete. |
| 31 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer in-charge. |
| 32 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.\\" |
| 33 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) |
| 34 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge. |
| 35 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources |
| 36 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Mild steel and Medium Tensile steel bars |
| 37 | Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets,, slab, kerbs and steps etc. |
| 38 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 12.4.1 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 39 | Errection and dismantling pipe scaffolding with the help of wooden plank's. For work false ceiling, Masonry, etc |
| 40 | Provision for supply of petty articles as per requirement for setup of temporary office of Joint Director General and staffs for maintain the records etc complete.LED Tube light 4Foot (Crompton or eq) [EACH] |
| 41 | Havells LED Bulb Plus 9W [EACH] |
| 42 | Switch 16 Amp(Havells or eq) [EACH] |
| 43 | Socket16 Amp (Havells or eq) [EACH] |
| 44 | Extention board 4 way with 5 mtr wire(Heavy Duty) [EACH] |
| 45 | Water Jug (5 ltr) Milton or eq) [EACH] |
| 46 | Dustbin [EACH] |
| 47 | Jhadu (Broom) [EACH] |
| 48 | Microfibre Duster for Multipurpose Use - 30x30 cm, Pack of 10 (Blue, Orange, Yellow, Purple & Green) [EACH] |
| 49 | Handwash (5ltr) [EACH] |
| 50 | Tissue box [EACH] |
| 51 | Floor Mat (7.60 mtr x 5.50 mtr) [EACH] |
| 52 | Tower AC repair [EACH] (existing at size) |
| 53 | Concealed PVC box 4\\"x6\\" [EACH] |
| 54 | PVC Plate 4\\"x6\\" [EACH] |
| 55 | Glass Tumbler [EACH] |
| 56 | garbage bag small size [EACH] |
| 57 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:-Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.16.43.2 Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer |
| 58 | Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5m. 2.28.1 All kinds of soil |
| 59 | Removal of collected malwa from monument to outside of Municipal limit by tractor trolley / truck etc. and manual labour including stacking of serviceable material stone in a suitable places for reuse etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender