Tender For Repair Of Standard Make Apfc Panel At Punjabi Bagh Bps In Ac-26.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Aug 2026
2 days left
EMD
22800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Standard Make Apfc Panel At Punjabi Bagh Bps In Ac-26.
BOQ
| Sl. No. | Item Description |
| 1 | Renovation of APFC panel 400 Kvar: 1 No. Dismantling of defective capacitor units from the APFC panel after suitably discharging the left-over charge on capacitors to ensure safety of the working persons along with dismantling of APFC relay, indications lights, meters, A/M switches, MCBs including dismantling of terminations and existing hardware and rusted parts and various other items requiring change in the panel as required at site |
| 2 | Supply of Super heavy duty capacitor units of various capacities, rated at 440V, 3 phase, 50 Hz system complete with terminal cover, cable end entry, mounting structure and hardware etc. Make STANDARD |
| 3 | Banking of capacitor units to form banks of suitable rating by electrical interconnection using aluminium bus bars or copper multistrand cables with lugs, tapes etc. to form banks as per requirement of various capacitor banks. |
| 4 | Supply of capacitor duty contactors for 20 KVAr capacitor for replacement of defective contactors of APFC panels. Make Standard. |
| 5 | Supply of Microprocessor based APFC relay to replace defective APFC relay with digital display of power factor and other parameters to sense power factor through control CT and give phased impulses to contactor coils for switching ON-OFF required number of capacitors as per requirement to achieve target power factor- make STANDARD |
| 6 | Supply of triple pole MCCB of 200 A capacity for operation and safety of individual capacitor bank - make:Standard |
| 7 | Supply of Spreader terminal for 200A triple pole MCCBs for connection with bus bars-make Standard |
| 8 | Supply of triple pole MCCB of 125 A capacity for operation and safety of individual capacitor bank - make Standard |
| 9 | Supply of Spreader terminal for 125A, triple pole MCCBs for connection with bus bars. make Standard |
| 10 | Supply of 0-200 A Ammeter complete with selector switch and set of 3 nos. CTs for monitoring health of capacitor bank, make -AE/HPL |
| 11 | Supply of 0-500V digital Voltmeter with selector switch. Make–AE/HPL |
| 12 | Supply of LED indication lights of various colours to replace defective/burnt out lights make -standard |
| 13 | Power wiring with 10 sq. mm for connection between capacitors and bus bar with copper lugs and necessary hardware etc. as required at site. |
| 14 | Installation of all above components in the existing capacitor banks with suitable fabrication work to accommodate new items in the existing enclosure / structure for alignment of components and ease of termination complete with hardware on the mounting structure and termination of existing cables with lugs, tapes etc. complete with earthing of the capacitor banks, touching the rusted parts of the structure with paint for protection from moisture etc. as required at site. |
| 15 | Servicing of APFC panels including complete dusting of the panel, cleaning of contact points, Decarbonising of joints, alignment of doors, checking of all nuts & bolts control circuit and power circuit wiring dressing and renovation of control and power terminations with lugs tapes etc. as required at site. |
| 16 | Testing & commissioning of complete APFC Panel installation including following: 01. Meggering of complete capacitor installation using 500V megger 02. Continuity test for checking continuity of all circuits 03. Programming of APFC relay for target power factor 04. Monitoring of Power Factor as per specified parameters |
| 17 | Renovation of fixed capacitors bank of motors Checking of capacitors and dismantling of defective capacitors from static capacitor banks including dismantling of terminations, wirings, hardware, as required at site |
| 18 | Complete power wiring for electrical interconnection of capacitor banks and MCCBs with multistrand copper wire of various capacities using lugs, tapes, cleats etc. as required and dressing of the wires with ties to hold the same in place for neatness and safety of the equipment as required |
| 19 | Supply of Super Heavy duty capacitor unit rated at 100 kVAr for 3 nos. 200 kW motors & 110 kVAr for 2 nos. 220 kW motors rated at 440V, 3phase, 50 Hz system complete with terminal cover, cable end entry, mounting structure and hardware etc. -make STANDARD |
| 20 | Banking of capacitor units to form banks of suitable rating by electrical interconnection using aluminium bus bars or copper multistrand cables with lugs, tapes etc. to form banks as per requirement of various capacitor banks. |
| 21 | Supply of 0-200A Ammeter complete with selector switch and set of 3 nos. CTs for monitoring health of capacitor bank of each motor, make -AE/HPL |
| 22 | Supply of Red ON indication LED lights to indicate status of capacitor banks -make Standard |
| 23 | Installation of all above components in the existing capacitor banks with suitable fabrication work to accommodate new items in the existing enclosure / structure for alignment of components and ease of termination complete with hardware on the mounting structure and termination of existing cables with lugs, tapes etc. complete with earthing of the capacitor banks, touching the rusted parts of the structure with paint for protection from moisture etc. as required at site |
| 24 | Servicing & commissioning of static capacitor banks including complete dusting, tightening of all connections, cleaning of electrical terminations, megger testing and re-commissioning of capacitor banks |
| 25 | Repair of static capacitors of transformer - 2 Nos Checking of capacitors and dismantling of defective capacitors from static capacitor banks including dismantling of terminations, wiring, hardware, as required at site. |
| 26 | Supply of Super Heavy duty capacitors of various capacities rated at 440V, 50 Hz, 3 phase AC complete with terminal cover and discharge device for replacement of defective capacitors -Make Standard |
| 27 | Banking of capacitor units to form banks of suitable capacity by electricidal interconnection with multistrand copper wires/Al. bus bars using necessary mountings and hardware, etc. as required at site. |
| 28 | Supply of LED indication lights of various colours to replace defective/burnt out lights make -standard |
| 29 | Installation of all above components in the existing capacitor banks with suitable fabrication work to accommodate new items in the existing enclosure / structure for alignment of components and ease of termination complete with hardware on the mounting structure and termination of existing cables with lugs, tapes etc. complete with earthing of the capacitor banks, touching the rusted parts of the structure with paint for protection from moisture etc. as required at site |
| 30 | Servicing & commissioning of static capacitor banks including complete dusting, tightening of all connections, cleaning of electrical terminations, megger testing and re-commissioning of capacitor banks. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender