Tender For Repair Of Washrooms In Anardana Chowk, Mini Market, Sher E Punjab Market And Others . Est. Cost Rs. 9.70 Lacs
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
4 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Washrooms In Anardana Chowk, Mini Market, Sher E Punjab Market And Others . Est. Cost Rs. 9.70 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 2 | Scraping Cement Plaster |
| 3 | 12.5 mm thick cement plaster 1:2 |
| 4 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling. |
| 5 | CC 1:2:4 |
| 6 | P/L anti skid tiles 300*300*10mm |
| 7 | Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing. |
| 8 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface. Complete as per specifications |
| 9 | Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade. |
| 10 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality |
| 11 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 12 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 13 | 20 W LED Tubelight |
| 14 | Switches and Boards |
| 15 | P/F 6\\" tower bolt SS |
| 16 | P/F 6\\" door handle SS |
| 17 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position 30mm thick |
| 18 | Providing & fixing 4\\" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 19 | PVC waste water pipe 32mm |
| 20 | Providing and fixing PTMT urinal cock of approved make (to the approval of Engineer-incharge) 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48gms of approved quality and colour complete in all respect. |
| 21 | Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge) |
| 22 | Dismantling Sanitary fixtures |
| 23 | Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590mm of approved make (to the approval of the Engineer-incharge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. |
| 24 | Providing and fixing in position Metropole flush valve push type 32mm size dual flow (Concealed body) with exposed shut off provision and round plate complete in all respect. |
| 25 | Carriage |
| 26 | Loading and Unloading |
| 27 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect Glazing area above 0.09 sqm 4mm thick or 10.78 Kg/ sqm |
| 28 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P.brass 20mm concealed stop cock with flange |
| 29 | Providing, fixing and jointing 40mm i/d Union |
| 30 | Providing, fixing and jointing 32mm i/d Union |
| 31 | Providing and fixing in position G.I. tank nipple 40mm i/d |
| 32 | Providing and fixing in position G.I. tank nipple 32mm i/d |
| 33 | Providing, fixing and jointing 32mm i/d Brass Ball valves |
| 34 | Providing and fixing in position SWR UPVC 110mm o/d pipes P Trap/Floor Trap 110mm x 110mm |
| 35 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend32 mm dia |
| 36 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. With C.P. Brass nut |
| 37 | Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-incharge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. |
| 38 | Providing and fixing plastic hygenic seat cover with lid complete. Plastic Seat Cover Premium star white/pastel/special colour |
| 39 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 40 | Providing and fixing in position vitreous chinaware white lavatory suites . Size 630 mm x 450 mm x 830 mm |
| 41 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 42 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 43 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 44 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 45 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. C.P. brass Bib cock long nose/ long body foam flow without flange |
| 46 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 |
| 47 | Providing and fixing PVC Cistern 10 Ltr. Capacity ISI marked IS 7231:1994( size 32.5x47.6x15.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings complete. |
| 48 | Extra for providing and fixing G.I. 32mm waste pipe for urinal including elbow, reducer etc complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender