Tender For Providing And Installation Of Inverters Along With Maintenance & Repairing For Light, Fans, Switch Boards Etc., At The Mechanical Sub-Division, Udaipur, Gomati Tripura.
Tender Value
1.75 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
1 days left
EMD
3506
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of Inverters Along With Maintenance & Repairing For Light, Fans, Switch Boards Etc., At The Mechanical Sub-Division, Udaipur, Gomati Tripura.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:- |
| 2 | Short Point :- |
| 3 | Medium Point :- |
| 4 | Long Point :- |
| 5 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 6 | Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 7 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. |
| 8 | 2 x 1.5 sq.mm:- |
| 9 | 2 x 2.5 sq.mm:- |
| 10 | 2 x 4 sq.mm:- |
| 11 | 2 x 6 sq.mm:- |
| 12 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/ surface including connection etc. as required. |
| 13 | 1 x 1.5 sq.mm:- |
| 14 | 1 x 2.5 sq.mm:- |
| 15 | 2 x 4 sq.mm:- |
| 16 | 2 x 6 sq.mm:- |
| 17 | 2 x 10 sq.mm:- |
| 18 | Supplying and fixing of powder coated sheet steel enclosure on surface/recess, suitable for 240/415 volts MCB/ Isolator/ RCCB (SP/ SPN/ DP/ TP/ TPN/FP) complete with necessary bus bar, neutral link,din rail ,earth bar, etc. i/c connection as required . |
| 19 | (2+10)/12 way MCB DB (double door):- |
| 20 | 2 Way MCB DB (Single door):- |
| 21 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required: |
| 22 | 6 to 32 amps DP MCB:- |
| 23 | 6 to 32 amps SP MCB:- |
| 24 | Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:- |
| 25 | 63 amps kitkat porcelain fuse unit with base(rewireable):- |
| 26 | Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W). |
| 27 | Supplying & installation of 400 mm sweep AC wall mounting fan with plastic blade including connection etc as required:- |
| 28 | Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc. as required:- |
| 29 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 30 | Supplying and fixing of the following modular accessories including necessary connection etc. as required. |
| 31 | 4 step fan regulator (1M):- |
| 32 | Blank plate (1M):- |
| 33 | Buzzer call bell (1M):- |
| 34 | 6/10 amps one way SP switch(1M):- |
| 35 | Bell push SP(1M) |
| 36 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 37 | Surface mounted round/square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser. |
| 38 | Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):- |
| 39 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- |
| 40 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):- |
| 41 | 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink:- |
| 42 | 6 watt/10 watt LED Bulkhead light with high quality polycarbonate diffuser (IP 65):- |
| 43 | Supplying and fixing of the following sizes GI (in reces) and plastic(on surface) modular switch boards etc. as required. |
| 44 | 1-2 module plastic switch board |
| 45 | 3 module plastic switch board |
| 46 | 6 module plastic switch board |
| 47 | 12 module plastic switch board |
| 48 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required. |
| 49 | 1-2 module |
| 50 | 3 module |
| 51 | 6 module |
| 52 | 12 module |
| 53 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\\"x 12\\" having locking arrangement including CC work, holes on earth pipe etc. as required:- |
| 54 | Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required. |
| 55 | Proving and fixing / Drawing 4.06 mm dia (8 SWG) Copper wire on surface or in existing G.I / PVC / Polythene pipe for loop earthing as required. |
| 56 | Providing and laying of 15 mm dia(medium guage) G.I Pipe for drawing of 4.06 mm (8SWG) dia copper wire for earth connection from earth electrodes etc as required |
| 57 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:- |
| 58 | Supplying, installation, teating and commissioning of following ratings inverter with square/sine wave technology, noiseless operation, inbuilt advance PCB programming, microprocessor with all accessories including necessary connection etc. as required:- |
| 59 | 1500VA, 24V DC, 1 ph input/1 ph output inverter(sine wave technology) |
| 60 | Supplying, installation, teating and commissioning of following ratings Valve regulated lead acid(VRLA) battery with all accessories including necessary connection etc. as required:- |
| 61 | 12V/200AH tall tubular/flat plate battery Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender