Tender For Procurement Of Maintenance Material For Functioning Of Street Light In North Zone Dnh Area.
Tender Value
48.81 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
7 days left
EMD
97700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dadra and Nagar Haveli → Dadra and Nagar Haveli
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Procurement Of Maintenance Material For Functioning Of Street Light In North Zone Dnh Area.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 415V/220V operating coil suitable for (L&T, BCH,T.C., Siemens, C&S make).110 Amp. |
| 2 | Supplying of LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %. ( fittings required LM-79 & LM-80 certificates) (NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The Engineer incharge may select any wattage capacity between the ranges shown.) (make-Crompton, Havells, HPL)36 Watt - Cat.-III |
| 3 | Supply of Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.16 Amp. (110A set) |
| 4 | Providing Approved make Triple Pole Metal / Iron Clad Switch (ICTP) & Fuse with neutral link 415/500 V confirming to IS63 Amp. Cat. - III |
| 5 | Supply of electrical insulation L.T. Tape role with ISI marked having nominal width 1.8 cms nominal length 9.0 mtr nominal thickness 0.125 mm and having self adhesive PVCPVC Tap |
| 6 | Supply of KITKAT pattern porcelain cut-out fuse with base of following current capacity erected on existing block board.63 Amp. |
| 7 | Supply of Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark 25 Amp. Cat. - III |
| 8 | Supply of 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity40 Amp. Cat. - III |
| 9 | Supply of 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity32 Amp. Cat. - III |
| 10 | Supply of 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 63 Amp. Cat. - III |
| 11 | Supply of 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 32 Amp. Cat. - III |
| 12 | Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity63 Amp. Cat. - III |
| 13 | Providing XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (Make-RR Cable, Polycab, Polycab, Attracab, Allwyn) Armoured Aluminium 4 core 10 Sq.mm wire |
| 14 | Providing XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (Make-RR Cable, Polycab, Polycab, Attracab, Allwyn)Armoured Aluminium 4 core 4 Sq.mm wire |
| 15 | Providing XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size. (Make-RR Cable, Polycab, Polycab, Attracab, Allwyn)Unarmoured Aluminium 4 Core 4 Sq.mm wire |
| 16 | Providing of Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (Make-RR Cable, Polycab, Polycab, Attracab, Allwyn)Single Core 2.5 Sq.mm wire |
| 17 | Providing of Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (Make-RR Cable, Polycab, Polycab, Attracab, Allwyn)Single Core 1.5 Sq.mm wire |
| 18 | Providing of Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (Make-RR Cable, Polycab, Polycab, Attracab, Allwyn)Single Core 4 Sq.mm wire |
| 19 | Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size. (Make-RR Cable, Polycab, Polycab, Attracab, Allwyn)Unarmoured Aluminium 2 Core 4 Sq.mm Service wire |
| 20 | Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 KV.grade to be erected as directed of following size. (Make-RR Cable, Polycab, Polycab, Attracab, Allwyn)Unarmoured Aluminium 2 Core 6 Sq.mm Service wire |
| 21 | Supplying of LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)190W LED Cat. - III Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender