Tender For Additionn/Alteration Cum Special Repair To Bldg No P-4 Jcos Club Of 151 Inf Bn (Ta) Jat At Muzaffarpur Mil Station
Tender Value
22.39 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
5 days left
EMD
44780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Additionn/Alteration Cum Special Repair To Bldg No P-4 Jcos Club Of 151 Inf Bn (Ta) Jat At Muzaffarpur Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or walls tiles including cement mortar bedding but not backing and rubbish off permises complete all as specified and directed. |
| 2 | M&L for Vitrified ceramic tiles dark shade 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm as in skirting etc set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 4 | M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick square/rectangular) (joint free) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floor etc set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 5 | M&L for glazed ceramics coloured tiles of size 450x350x7mm thick in certical surfaces such as skirting / dados/ wall, set and jointed n neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 6 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 7 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 8 | Same as item No 7 above but except bricks. |
| 9 | M&L for Machine cut cudappah stone slab flooring 20-25mm thick laid over 15 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete. |
| 10 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 11 | M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete.Note : Liquid WPC will be measured and paid separately.Note : Liquid WPC will be measured and paid separately. |
| 13 | M&L 5 mm thick rendering on fair faces of bk /concrete surfaces as on ceiling in CM (1:3), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 14 | Supply only water proofing compound (liquid), ISI marked. |
| 15 | Dismantling of Wall Panelling/ false ceiling board ,fiber insulation board any thickness including wooden cover fillets/ aluminium frame work complete all as specified and directed. |
| 16 | S&F anodised aluminium snap grid ( size 605mm x 605mm) frame work for false ceiling with hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and fixing 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed. |
| 17 | M&L for wall lining of PVC hollow sheet 5-7 mm thick consisiting of 20mm MS hollow square tubes grid (1M X 1M) and fixed with screws complete all as directed. |
| 18 | Dismantling structural steel work including doors, gates but excluding framed trusses etc. |
| 19 | S&F steel work in tabular trusses incl special shaped washer etc complete using ERW or induction built welded tubes complete all as specified and directed. |
| 20 | M&L for cutting holes into or through birck walls built in cement mortar / cement lime mortar superfacial area n exc 150 sq cm and making good in cement mortar 1:3 or PCC (1:2:4) type B1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 21 | Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 22 | Same as item No 21 above but exc 1.5 Sqm and n.exc. 4 Sqm each. |
| 23 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and directed. |
| 24 | S & F 30 mm thick flush shutters solid core construction with particle board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. |
| 25 | S&F steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed. |
| 26 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. |
| 27 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay with glazing bars, dovetailed or welded complete all as specified and directed. |
| 28 | Same as item No 27 above but without glazing bar |
| 29 | S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. |
| 30 | S & F in repair aluminium door shutter with following specification:-(a) chowkhat frame of size 63.00 x 38.10 x1.22 mm @ 0.650Kg/RM(b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM(c) Top and Middle rail of size 47.62 x 44.45 x 1.18 mm @ 0.667 KG/RM(d) Bottom Rail of size 114.30 x 44.45 x 1.29 mm @ 1.139 KG/RM(e) Partialy 6 to 8mm ACP Cladding/9mm thick prelaminated particle board both side decorative(f) Partialy 5.5 mm thick tinted glass. (g) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass. (h) Two No.Disk Type Aluminium handle 200 mm long.(i) One No. Mortice lock and jointing cleat. |
| 31 | S & F in repair aluminium window sliding shutter three track with following specification:-(a) chowkhat frame of size 92 x 31.75 x2 mm thick weight @ 1.490Kg/RM(b) Style/Vertical member of size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM(c) Top and bottom rail of size size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM(d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment.(e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket.(f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, jointing cleat including locking arrangement. etc |
| 32 | S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 |
| 33 | S & F, Solid PVC door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube, supplying and fixing in opening complete all as specified and directed. |
| 34 | S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed. |
| 35 | S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 36 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long. |
| 37 | S&F cast iron door closer hydraulically regulated designation No 03 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 38 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 39 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 40 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 41 | S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 42 | S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed. |
| 43 | S&F small fittings of 2nd class hard wood door, window stops and the like n exc 200 Cucm each incl MS butt hinges, medium weight, cold rolled 50mm long complete all as specified and directed. |
| 44 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1 mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 45 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 46 | S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 47 | S& F in repair 18/19 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 48 | S&F 100 mm long hasp & staple aluminium anodised wire type incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 49 | S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed. |
| 50 | S&F MS Hat and coat hooks, solid body 175mm to 250mm as approved complete all as specified and directed. |
| 51 | S&F Harrison rails mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 52 | Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia. |
| 53 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia. |
| 54 | Supply and Fixing 15 mm dia GI Tubes, 'Medium grade' galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 55 | Supply and Fixing 20 mm dia GI Tubes, 'Medium grade' galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 56 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 57 | S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed. |
| 58 | S&F in repair vitreous china WHB of size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and directed. |
| 59 | S&F in repair vitreous china squating pan 'Orissa' pattern WC of size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor complete all as specified and directed. |
| 60 | S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed. |
| 61 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 62 | S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed. |
| 63 | S&F in repair 5 mm thick looking mirror selected quality glass exc 0.50 sqm each and fixed to wall with stainless steel flat head mirror screw cups and washers including polished , rounded off edges of glass and drilling hole in glass complete all as specified and directed. |
| 64 | S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 65 | S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and directed. |
| 66 | S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 67 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 68 | S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 69 | S&F in repair of Soap dish, vitreous China white, approximate size 160x 160x90mm any type fixed to plugs with CP brass screws complete all as specified and directed. |
| 70 | S&F in repair sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 71 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed. |
| 72 | S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed. |
| 73 | S&F PVC (SWR) 'P' or 'S' trap for 110 mm dia etc complete all as specified and directed. |
| 74 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 75 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as reqd to facilitate demolition) such as cooking platforms, chajjas etc complete all as specified and directed. |
| 76 | M&L for RCC as in kitchen platform, shelves & chajjas etc 1:2:4 type B1 (using 20 mm graded stone aggregate) including necessary form work complete all as specified and directed. |
| 77 | S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 78 | Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe. |
| 79 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed. |
| 80 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 81 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors / trenches complete all as specified and directed. |
| 82 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed. |
| 83 | M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed. |
| 84 | S&F PVC (SWR) bends of any radius provided with access door of 110 mm dia complete all as specified and directed. |
| 85 | M/L PVC (SWR) Tee of 110mm dia etc complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed. |
| 87 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed. |
| 88 | Same as item No 87 above but 75 mm bore |
| 89 | S&F PVC (SWR) vent cowl 110mm bore |
| 90 | S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed. |
| 91 | Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed. |
| 92 | S & F in repair rotational moulded polyethylene water storage tank of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position complete all as specified and directed. |
| 93 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete. |
| 94 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed. |
| 95 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 96 | M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 97 | M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 98 | M & L for preparation of newly plastered surfaces of wall & concrete and applying 2mm thick wall care putty including preparation complete all as specified and directed. |
| 99 | M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 100 | M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing complete all as specified and directed. |
| 101 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying two coat of Oil Bound Distemper of any light shade complete all as specified and directed. |
| 102 | M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed. |
| 103 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 104 | M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified directed. |
| 105 | Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 in cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified and directed. Note: LWPC will be measured and paid separately |
| 106 | M&L for complete removal of existing unserviceable water proofing treatment from top of roof and canopies/chajjas of building including removal of debris out side MD land complete all as specified and directed. |
| 107 | M&L brushing with neat cement slurry @ 3Kg of cement per square meter complete all as specified and directed. |
| 108 | M&L for 10mm rendering on roof surfaces/ concrete surface in CM 1:4 complete all as specified and directed. |
| 109 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(i) Properly cleaning and drying concrete surfaces.(ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.(iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.(iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.(v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. |
| 110 | M&L for two coats of elastomeric cementatious coating pidifin 2k of pidilite or equivalent in fosroc, sika, STP on exposed brick surface after complete removal of old plaster surface complete all as manufacturer instructions and as directed. |
| 111 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness ( below or above ground level) complete all as specified and directed. |
| 112 | M&L for chequered cement concerte tiles 30cm x 30cm x 25 mm laid with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 113 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in fdn, filling and mass concrete sub base as of floors complete all as specified and directed. |
| 114 | M&L for providing plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, water troughs incl weathering, slighting rounded or chamfered angle and throuting incl necessary from work complete all as specified and directed. |
| 115 | Taking down carefully copper/aluminium point wiring (Light,fan,socket are power) complete fitting such as switches, ceiling rose, regulator, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. all as specified and directed. |
| 116 | M&L for one light / fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified. |
| 117 | All as per item No 116 above but one 3/5 pin socket out let 5 amp on same board with other switches. |
| 118 | All as per item No 116 above but socket 5 amp on independent board. |
| 119 | All as per item No 116 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size |
| 120 | All as per item No 116 above but socket out let 3/6 pin 15 Amp with 2.5 sq mm size copper conductor for power point on indipendent board. |
| 121 | Supply & Fixing switch modular single pole, one way 6 Amp ,01 module. |
| 122 | Supply & Fixing switch modular bell push 6 Amp ,01 module. |
| 123 | Supply & Fixing switch modular single pole, one way 16 Amp ,01 module. |
| 124 | Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module. |
| 125 | Supply & Fixing modular socket 6/16 Amp-2/3 pin combined ,2 module. |
| 126 | Supply & Fixing call bell Ding Dong AC. 230 volts, single pole. |
| 127 | S&F Modular electronic type step fan regulator, 120 W-2 module. |
| 128 | Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete. |
| 129 | Supply & Fixing lamp holder PVC / Ploycarbonate modular type. |
| 130 | Supply & Fixing LED lamp 09 Watt . |
| 131 | Taking down existing light fitting of any type,make & capacity . |
| 132 | Supply and fixing LED lights fitting 1x 20W, 220V,AC integrated type including driver, Extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser , 4 ft, 2000lm, voltage protection range 140V -270 V,NW 4000K , ,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 133 | All as above item No 132 but of 10 W 2 feet. |
| 134 | Supply and fixing recess mounting LED luminaire of size 600mmX600mm white 36 watt, 230 volts for POP ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. |
| 135 | Supply and fixing integral LED light fitting, 15 W, 230 Volts, decorative surface mounted round / Square shaped (down lighter) , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size. |
| 136 | Supply and fixing integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size. |
| 137 | Supply & fix exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 300 mm sweep with louver including breaking necessary hole in wall for fixing the exhaust fan and making good to disturbed surfaces with cement mortar to match with existing after commissioning . |
| 138 | Supply & fix fans ceiling having copper winding motor ,complete with electronic type regulator and accessories 230 V,50 Hz AC ,1200 mm sweep. BEE 5 star rated.Make Bajaj Model Elegance 1200 mm or equivalent model of make specified in appendix 'B' to particular specifications. |
| 139 | Supply & Fixing wall mounting fan complete steel body and copper winding fan motor 400 mm sweep, 230 V AC,including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. |
| 140 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 141 | M & L for power/sub main wiring with two runs of single core 6 sqmm size and one run of single core 6 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC conduit complete all as specified and directed.( Note - two runs of 6 sq mm single core copper conductor and one runs of 6 Sq mm copper conductor shall be measured as one unit length.) |
| 142 | Supply & fixing earth plug enclosure (plug and socket ) with MCB, SP 20 Amps. |
| 143 | Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 12 way. |
| 144 | Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way. |
| 145 | Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail TPN 4 way. |
| 146 | S & F in replacement of MCB TPN 40 to 100 Amps 415 volts, 10KA \\"C\\" curve. |
| 147 | S & F in replacement of MCB SPN 32 Amps 240 volts, 10 KA, \\"C\\" curve. |
| 148 | S & F in replacement of MCB SPN 40 to 63 Amps 240 volts, 10 KA, \\"C\\" curve. |
| 149 | S & F in replacement of MCB SP 5 to 32 Amps 240 volts, 10 KA, \\"C\\" curve. |
| 150 | M&L earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth wire 4Sq mm as earthing leads by means of bolts, nuts, check nuts and washers properly jointed as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender