Tender For Providing Of Certain Sanction Wks In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi Cantt-10
Tender Value
46.24 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
12 days left
EMD
92480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Certain Sanction Wks In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubbing down with water etc incl remove all debris in 2 KM form site complete all as specified and directed. |
| 2 | M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , in cement mortar (1:4 ) mixed finished even and fair etc complete all as specified and directed |
| 3 | M&L Rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified. |
| 4 | M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. |
| 5 | M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper complete all as specified. |
| 6 | Dismantling water tanks and removing to store of 500 Ltr Capacity |
| 7 | Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed. |
| 8 | M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks, old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed. |
| 9 | Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed. |
| 10 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 11 | M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified |
| 12 | M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified |
| 13 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed. |
| 14 | S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete Make Polytuff/symet or equivalent |
| 15 | S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make-Jaquar/marc/Kohlar, complete all as specified |
| 16 | S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed. |
| 17 | S&F in repairs looking mirror of size 600mmx450mmx5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. Make- Atul/Swastik/Hindustan safety glass works Pvt Ltd. |
| 18 | Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. |
| 19 | S & F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to 10mm thick (1:4) CM Screed bed |
| 20 | All as per item no. 19 except on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:4, set and jointed in white cement with pigment to match all as specified and directed. |
| 21 | M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed in CM 1:6 using marble dust with admixture in CM (1:4) with pointing and white cement (1:2) of pigment to match with shade of granite all as spd. |
| 22 | Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt |
| 23 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 24 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 25 | Demolition of cement concrete (un-reinforced) as path, paving and any position and any thickness complete all as specified and directed. |
| 26 | M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth , complete all as specified. |
| 27 | M & L for 40 mm thick cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) as in floor & surfaces finished even and fair using extra cement, complete all as specified. |
| 28 | Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortar of any diameter incl bends. |
| 29 | S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears ,110mm bore complete. |
| 30 | S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete. |
| 31 | Supply only for broken brick coarse aggregate n.exc 40mm deposited, spread and levelled in layers watered and rammed to a true surfaces complete all as specified. |
| 32 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed |
| 33 | Surface dressing not exc 15 cm deep in soft / loose soil complete all as specified and as directed by Engr in charge |
| 34 | M&L for 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggreate)in sub base, filling and mass concrete |
| 35 | M&L for machine pressed precast concrete interlocking paver block 80mm thick M-40 grade any shape and size with grey cement and pigment |
| 36 | M&L for sand filling under floor or in foundations including watering and consolidation |
| 37 | M&L Providing cement concrete in coping type B-1 ,1:2:4 using 12.5mm graded stone aggregate complete all as specified including necessary form work and finishing the exposed surface even and smoth with using extra cement complete all as specified. |
| 38 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundation etc in soft/loose soil complete in all respect as specified and directed. |
| 39 | M & L for cement concrete as in foundation filling subbase or mass concrete using cement concrete type D2 1:4:8 (40mmgraded aggregate) complete in all respect as specified and directed. |
| 40 | M&L for providing precast cement concrete block masonry type C1 1:3:6(20mm graded aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed. |
| 41 | M&L for Providing precast cement concrete solid building blocks 10cm thick C1 1:3:6 (20 MM grade aggregat) setting in cement mortar 1:4 complete all as specified and as directed. |
| 42 | M & L Reinforced cement concrete in for Fdn, footing, fdn beam, plinth beam using type B0 1:2:4 (nominal mix) 20 mm graded stone aggregate complete in all as specified and directed. |
| 43 | M & L Reinforced cement concrete in beam cantilevers lintels etc using type B0 1:2:4 (nominal mix) 20mm graded stone aggregate complete in all as specified and directed. |
| 44 | M & L Reinforced cement concrete in column, pillars, piers etc using type B0 1:2:4 (nominal mix) 20mm graded stone aggregate complete in all as specified and directed. |
| 45 | M&L mild steel TMT bars10mm dia and over cut to length , bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia bars confirming to Fe-410-S or Fe-410-0 complete in all respect as specified and directed. |
| 46 | M&L mild steel TMT bars 5mm dia and over up to 10mm for stirrups cut to length , bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia bars confirming to Fe-410-S or Fe-410-0 complete in all respect as specified and directed. |
| 47 | Formwork to side of concrete fdn, footing, base of column etc and similar work square or rectangular surface complete in all respect as specified and directed. |
| 48 | Formwork to side of piller , post etc and similar work square or rectangular complete in all respect as specified and directed. |
| 49 | Formwork to side and sofit of floor or roof beam flat or rectangular surface complete in all respect as specified and directed. |
| 50 | Use and waste of form work to edges of concrete slabs horizontal of slopping rough finished flat surfaces exc 10 Cm but not exc. 20 CM wide complete in all respect as specified and directed. |
| 51 | M&L rendering 10mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete in all respect as specified and directed. |
| 52 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specifed as direted by Engr-in-charge. |
| 53 | S&F 600mmx450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board with alu angle frameing and fixed to wooden plugs with chromium plated brass screws and cup washers with hanging chips complete in all respect as specified and directed. |
| 54 | S&F Wash basins, Vitreous China (flat back or angle back type or counter top) size 550x400, including cutting for and pinning in ends of brackets incl waste pipe complete all as specified and directed. |
| 55 | S&F 15mm bore dia fancy type chromium plated stop/angle valves cast copper alloyes, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete in all respect as specified and directed. |
| 56 | S&F 15mm bore dia brass CP Mixer hot and cold water screwed down for iron pipe and fixed complete in all respect as specified and directed. |
| 57 | S&F 15mm bore dia brass cromium plated shower roses 125 mm size with or without swivel joints, complete in all respect as specified and directed. |
| 58 | S & F Vitreous China wash down water closet pan (pedestal pattern), white Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and long arm cast iron trap including PCC bedding complete incl long bend in all respect as specified and directed. |
| 59 | S & F Vitreous china urinal full stall type bowl type complete including waste pipe and providing and fixing plugs, bedding urinals against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinals back in cement fixing flush pipe grating and union for discharge pipe complete in all respect as specified and directed. |
| 60 | M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor including necessary cutting/chauging in walls made of brick/concrete surface complete in all respect as specified and directed. |
| 61 | M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor including necessary cutting/chauging in walls made of brick/concrete surface complete in all respect as specified and directed. |
| 62 | S&F aluminium frames for doors, windows, ventilators with one or more rebates including joining joining cleats for fixing etc complete all as specified and as directed. |
| 63 | S&F anodised aluminium window and ventilator shutter, side hung type type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading, scews anodised aluminium fittings such as peg stay 150mm long (01 No), hinges type B-21 100mm long (02 No) suitable handle (01 No) complete all as specified and as directed. |
| 64 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 65 | S & F 4mm thick frosted glass, pin head type and glazing with oil putty in squares n. exc 0.5 Sqm each pane complete in all respect as specified and directed. |
| 66 | M&L for hard core of broken stone or boulder of guage not exc 63 mm deposited, spread, and levelled in layers not exc 15 cm thick watered and rammed to true surface complete all as specified and as directed. |
| 67 | M&L PCC (1:3:6) type C-2, using 40mm graded stone aggregate, 75mm thick as in plinth protection finished even and smooth without using extra cement complete in all respect as specified and directed. |
| 68 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete in all respect as specified and directed. |
| 69 | Removing excavated material not exc. 50m and depositing where directed by the eng-in-charge |
| 70 | S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet re-inforced with MS square tube, S & F in opening as per specification and drgs Make Rajshree) |
| 71 | S & F factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 72 | S&F150 mm long extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed. |
| 73 | S&F aluminium anodised barrel tower bolt of extruded section length of bolts 125mm complete all as specified and directed. |
| 74 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 75 | S&F mild steel cold rolled\\" Medium Weight \\"butt hinges 100 mm in size fixed with screws to wooden frames or with welding to steel frames including all accessories complete all as specified and directed. |
| 76 | S&F 10 ltrs capacity PVC valveless, syphonic action type, flusting cistern, low level, white, with inlet ball valve, float and handle including brackets in repair |
| 77 | S&F PVC connection 15mm size with PTMT nuts of length 450 mm Make:- Symet/ Prayag all as specified and directed by Engr-in-charge. |
| 78 | S&F CP fancy type health faucet with 1 mtr long flexible spring type steel tube & hook all as specified and directed |
| 79 | S&F pillar taps,15mm dia fancy type with capstan heads,chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts,screwed for iron pipe and fixed. |
| 80 | S&F brass chromium plated tubular tower rail 20mm dia |
| 81 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, in floors etc. set & jointing in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer of mortar in cement mortar (1:6) for laying floor finish,complete all as specified and directed. |
| 82 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and pointing in white or coloured cement to match over 10 mm thick plaster in cement mortar (1:4) as in backing coat to receive wall tiles complete all directed. |
| 83 | M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm grade stone aggregate) as in Sub floors,Sub bases ,flooring etc |
| 84 | M&L for 40 mm thick PCC 1:2:4 , Type B-1 (using 20 mm graded stone aggreagte) as in under laying layer etc, complete all as specified and as directed. |
| 85 | S&F anodised aluminium snap grid frame (with minimum 15 micron uniform anodic coating) size of 605mm x 605mm consisting of Tee/Angle section, size 40 x 40 x 2mm as approved make confirming to IS-733 in frame of false ceiling including aluminium cleat with necessary CP brass/stainless steel shunk screws. Aluminium perimeter angles fixed to wall/wooden frame at centre to centre and fixing frames to level adjusting anchors 8mm dia GI wire with hook in Tee members at 1.5m centre to centre fixed to steel trussed roof complete all as specified and as directed. |
| 86 | S&F Exposed metal frame ceiling with 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed. |
| 87 | S&F 75 mm PVC (SWR) vent cowl |
| 88 | S&F 75mm PVC (SWR) bends any radius |
| 89 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 90 | S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal |
| 91 | S&F stop valve, 20mm bore dia cast copper alloy, screwed down high prissure with crutch or butterfly handle screw both end for iron pipe or for unions and fixed |
| 92 | Material and labour for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description (Make : Syntex/Polywell) (ISI Marked) |
| 93 | S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed |
| 94 | S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed |
| 95 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 96 | M & L for cement concrete as in foundation filling subbase or mass concrete using cement concrete type D2 1:3:6 (40mmgraded aggregate) complete in all respect as specified and directed. |
| 97 | M&L for 50 mm thick cement concrete type D-2 1:3:6 (40mm graded aggreate)in sub base, filling and mass concrete |
| 98 | S& F 20 mm Ball brass valvess valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed |
| 99 | Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 100 | Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc to match the existing surface. |
| 101 | Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. |
| 102 | Taking down old submain wiring of any size, including coduit and make from the site complete all as specified. |
| 103 | Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified. |
| 104 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable unsheathed 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLSH unsheathed as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches, socket out let and fan regulators etc, complete all as specified. |
| 105 | All as per item No 104 here -in-before but one light/ fan point controlled by one switch. |
| 106 | All as per item No 104 here -in-before but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board but not below the switch board of light points in same vertical plate.. |
| 107 | All as per item No 104 here -in-before but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 108 | All as per item Ser No 104 here-in-before but point wiring with 2.5 sqmm single core FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 2.5 sqmm single core FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified. |
| 109 | M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.0 sqmm FRLSH 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4.0 sqmm FRLSH 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified |
| 110 | M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified Make : Legrand Cat Part No 573400 / Schnider Cat No X1001WH / Wipro Cat No RF 110 |
| 111 | M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified Make : Legrand Cat Part No 573424/ /Schnider Cat No X2005WHNS/ Wipro Cat No R 1212 |
| 112 | M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified Make : Legrand Cat Part No 573410/ Schnider Cat No X11001WH/ Wipro Cat No RF 130 |
| 113 | M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified Make : Legrand Cat Part No 573471/ Schnider Cat No X2106WH/Wipro Cat No R 1332P |
| 114 | M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified. |
| 115 | M&L for submain wiring with two single core PVC insulated FRLSH 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLSH 1100 volts unsheathed stranded copper conuctor cable of 6Sqmm size stranded conductor as earthwire.Note:- Two run of main wire PVC insulated FRLSH 1100 volts unsheathed stranded copper conductor and one run of earth wire with one run of PVC conduit will be measured and paid in one length. |
| 116 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed |
| 117 | Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-30 protection), mechanical impact strength IK - 07, with cement spill protector double door fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 100 to 160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified Note :- MCCB & MCB will be measured & paid separately. |
| 118 | M&L in replacement MCCB 100 Amps, 415 volts, 16 KA , 4P, optium 2.0 adjustable thermal setting Ics=100% Icu as per IEC 60947-II suitable for isolation , fixed over load and fixed short sircuit setting complete all as soecified & as directed |
| 119 | S & F in replacement sheet metal enclosure distribution board single pole and neutral, AC 240 volts, 08 way witn 100 Amps rated copper bus bar and metal double door with IP-30 & IK 07 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make) |
| 120 | S & F in replacement MCB SPN, AC, 240 volts, of 40 Amps capacity \\"B \\" curve, 10 kA breaking capacity & making connection by using using suitable copperr lugs complete all as specified. |
| 121 | S & F in replacement MCB SP, AC, 240 volts, of 6-32 Amps capacity \\"B \\" curve, 10 kA breaking capacity & making connection by using using suitable copperr lugs complete all as specified. |
| 122 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 123 | Supply and fix 35/40 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100 lumen/watts. The color temperature is around 5700 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor >0.9, voltage variation range 150-270 V, THD<20%, High and low protection along with a surge protection of 2.5 KV including provision of suitable size GI I light grade pipe of suitable length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete. |
| 124 | S&F flood light of capacity 100 watts High efficient light fitting with pressure die cast Aluminum housing and has lenses specially designed for flood Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100 lumens /watts. The color temperature is around 5700 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor >.0.9, voltage variation range 150-270V, THD<10%, High and low protection along with a surge protection of 2.5 KV including provision of suitable dia clamps, nuts, olts & washes etc for fixing the light fittings on wall fixed complete as specified and directed. |
| 125 | Taking down carefully the existing ceiling fan of 1200mm from its position after disconnecting electric connection and deposits in MES Store all as specified and directed. |
| 126 | Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by BLDC technology, BEE 5 star rating for energy saving, down rod, electonic regulators, fan canopy, remote of ceiling fan & all accessories, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. |
| 127 | Supply,laying in repairs of PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm 3.5 core laying in trenches, fixed along wall, through GI pipe under floor complete. |
| 128 | Supply and fix GI pipe 32 mm dia light grade , for laying in rod crossing /fixing of vertically complete all as directed. |
| 129 | Excavation in trenches n.exc 0.45 m wide and n.exc 0.60 m depth for laying of LT cables etc. and getting out in hard/dense soil soil soil complete all as specified |
| 130 | Returning filling in including spreading, levelling, watering and well ramming in layers n. exc. 25 cm complete all as specified. |
| 131 | Removal of excavation material not exc 50 Meter and depositing where directed at a level not exc. 1.5 M above the starting point complete all as specified and directed. |
| 132 | Material & Labour of DWC ( double wall corrogated ) pipe of size 50 x63 mm dia ( innner & outer dia ) laying of XLPE cable all as as specified & directed |
| 133 | Taking down carefully XLPE cable of size 25 sqmm 3.5 core all as specified & directed |
| 134 | M&L for submain wiring 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of suitable dia, medium grade with all conduit accessories and connected to common earth dolly to suitable copper lugs including all cutting/chases etc in walls and making good to the disturbed surfaces to match the existing surfaces. Note:- Three run of single Core wire and one run of conduit shall be measured and paid as one unit. |
| 135 | Supply and fix LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 136 | S & F modular type sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed. |
| 137 | S & F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge. |
| 138 | S & F water heater storage type Geyser ABS body vertical type with suitable size of fastner and including provision and connecting up of SS braidedpipe with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated, capacity 50 Ltrs, having heating element 2.0 KW and not less than 5 star rating, suitable for ,230 volt AC , 50 Hz electric supply complete all as specified and directed . |
| 139 | Material & Labour of DWC ( double wall corrogated ) pipe of size 38 x 50 mm dia ( innner & outer dia ) laying of XLPE cable all as as specified & directed |
| 140 | Supply & fixing table fans three blade, 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 400 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. |
| 141 | Supply & fixing wall fan 400 mm sweep 3 blade metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed . Make : Havells Model -Aindrila Premium or equivalent make of CG/Usha/Orient/Gold Medal |
| 142 | Supply & fixing padestal fan stand mounting AC single phase 230/240 V, of size 500 mm sweep, speed RPM 1400,Sturdy and shock proof body for fixing of fan complete all as specified & directed. |
| 143 | S&F exhaust fans AC single phase, 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with louvers for fixing of exhaust fan complete. |
| 144 | Taking down carefully the existing ceiling fan, wall fan, tale fan, padestal fan, exhaust fan and fresh air fan any type, any size and any make from its position after disconnecting electric connection and deposits in MES Store all as specified and directed. |
| 145 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender