Tender For Day To Day Maintenance Works In Md/ Otm Accn At Cdm Under Age B/R(N) No-Ii Of Ge(North) Secunderabad.
Tender Value
54 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
11 days left
EMD
1.06 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Day To Day Maintenance Works In Md/ Otm Accn At Cdm Under Age B/R(N) No-Ii Of Ge(North) Secunderabad.
BOQ
| Sl. No. | Item Description |
| 1 | S & F in repair PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and diected. |
| 2 | Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 250 & n. exc. 500 litres capacity of tank complete all as specified. |
| 3 | Description all as per item No 02 above but for tanks of capacity exc 500 & n exc 1000 litres |
| 4 | Description all as per item No 02 above but for tanks of capacity exc 1000 & n exc 2000 litres |
| 5 | S & F in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 210gms) |
| 6 | Description all as per item No 05 above but 25 mm size |
| 7 | Description all as per item No 05 above but 40 mm size |
| 8 | Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified and directed. |
| 9 | S & F in repairs brass spindel of 15mm size/ type and in any position complete all as specified and directed. |
| 10 | S & F rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary CPVC/GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore PTMT/Brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank complete all as specified and directed.Cat Part No: HSWS-0050-02- Pure of M/S Sintex |
| 11 | Description all as per item No 10 above but tank of size 1000 Litres.Cat Part No: HSWS-0100-01- Pure of M/S Sintex |
| 12 | S & F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified and directed. |
| 13 | Description all as per item No.12 above , but taking down and fixing only |
| 14 | S & F 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying infloors complete all as specified and directed. |
| 15 | S & F 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying infloors complete all as specified and directed. |
| 16 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 17 | Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 18 | M & L for cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting exc .20cm girth complete all as specified and directed. |
| 19 | S & F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including P-trap (PVC) 100 mm dia., connection to flushing pipe, anti-syphonage pipe complete including making good to floor complete all as specified and directed. |
| 20 | S & F in repairs Vitreous China wash down water closet pan (pedestel pattern) white including trap, connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe, including PVC jet for Pedestal pattern pan including 450/600mm long PVC connection including PTMT nuts and plastic water closet seat of white in colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 21 | S & F in repair vitreous china wash hand basin white of bowl size 550mm x 440mm including waste coupling and including M S brackets complete all as specified and directed. |
| 22 | S & F in repair Grace bath cabinate wall hung corrosion free and water proof cabinate with DTC high grade stainless steel soft close hinges , cabinet set with slim WHB of size 600mmX 470mm X 460 mm (with Mirror) including shelf in suitable color fixed in position with all necessary fittings including waste coupling and PVC waste pipe, 32mm dia. complete all as specified and as directed. Make: Johnson Grace Bath Cabinet Cat part No: E5580PW(Slim vanity Basin) , E5588SM(Shelf),E5592SM (Wall Mtd Cabinet) or equivalent make as per list of manufacturer and as approved by GE. |
| 23 | S & F in repair Vitreous china Urinal, Half stall type, white fixing with plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 24 | S & F in repair 600mmx450mm beveled edge looking mirror of selected quality glass of thickness not less than 5.50mm, etched desined corners, fixed to wall with 12mm dia spacers at Each corners complete all as specified and as directed. |
| 25 | S & F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed. Make: Cera/Prayag/Johnson Pedder. |
| 26 | S & F PVC connection 15mm bore size with two nuts and washers of PTMT of length 600mm complete all as specified and directed. |
| 27 | S & F CP connection Pipe (Braided Pipe) 15mm bore size with two nuts and washers made up of SS 304 of length 600mm complete all as specified and directed. |
| 28 | S & F in repair bathroom mirror cabinet made up of rust proof aluminium with a Mirror-front door and reflective mirrored interior of size 380 X 610 mm fancy type complete all as specified and as directed .Make : K-81144-DA1 Maxtow of Kohler or equivalent in Jaquar/Roca |
| 29 | S & F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 30 | S & F sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 31 | S & F in replacement stainless steel plate rack of size 609mm X 914 X 254 mm complete all as specified and directed. |
| 32 | S & F in repair for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and directed. |
| 33 | S & F in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and directed. |
| 34 | S & F in repair for corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and directed. |
| 35 | S & F in repairs 3 Tier PTMT Corner Shelf of size 250 X 250 X 600mm fixed with screws to walls complete all as specified and directed. |
| 36 | S & F in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or equivalent in ROCA/KOHLER |
| 37 | S & F in repairs vitreous china wash down rimless wall hung WC inbuilt jet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 355X555X370mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Cat No. FLS-WHT-5953JPPSM of Jaquar or equivalent in ROCA/KOHLER |
| 38 | S & F in repairs 15 mm bore dia concussive push button taps of cast copper alloy,screwed for iron pipe complete all as specified and directed. |
| 39 | S & F in repairs stainless steel peg set of five pegs, fixed/welded/soldered on stainless steel base plate of size 300mmx30mmx2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved by the Engineer-in-charge complete all as specified and directed. |
| 40 | S & F in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. of 1 metre long tube & wall hook complete all as specified and as directed.Make: Cat No: ALD-CHR-573 of Jaquar or equivalent in ROCA/KOHLER |
| 41 | S & F in repair CP soap dish , fixed to wall with CP brass screws, complete all as specified and directed. Make: Cat part No F505106CH of CERA or equivalent in ParryWare/Hindware |
| 42 | S & F in repair Brass CP towel rail complete all as specified and directed. Make: Cat part No F505104CH of CERA or equivalent in ParryWare/Hindware |
| 43 | S & F in repair Brass CP towel ring complete all as specified and directed. Make: Cat part No F505105CH of CERA or equivalent in ParryWare/Hindware |
| 44 | S & F in repairs CP bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Make: Cat part No F505105CH of CERA or equivalent in ParryWare/Hindware |
| 45 | S & F in repairs Two Way (2 in 1) bib taps with wall flange quarter turn suitable for 15mm bore pipe fancy type brass CP, screwed for iron pipe or brass ferrule complete all as specified and directed. Make: Cat part No: F1015161 of CERA or equivalent in ParryWare/Hindware |
| 46 | S & F in repairs Pillar taps long body quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrule complete all as specified and directed.Make: Cat part No: F1015453 of CERA or equivalent in ParryWare/Hindware |
| 47 | S & F in repairs Pillar tap quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrule complete all as specified.Make: Cat part No: F1015451 of CERA or equivalent in ParryWare/Hindware |
| 48 | S & F in repairs copper alloy chromium plated Single Lever Extended Basin Mixer (Height-85mm) without Popup Waste System with 450mm Long Braided Hoses all as specified and directed.Make :Cat part No: FUS-CHR-29023B of Jaquar or euivalent in ROCA/KOHLER |
| 49 | S & F in repairs cast copper alloy chromium plated fancy type central hole basin mixer with popup waste system with 450 mm long braided hoses capstan head for high pressure suitable for 15mm bore pipe complete and all as specified and directed.Make: Cat Part NoQQT-7169B of Jaquar or equivalent in ROCO/KOHLER |
| 50 | S & F in repirs wall mixer brass chromium plated quarter turn 2 in 1 with bend pipe with provision for over head shower with bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Cat part No: F1015401 of CERA or equivalent in ParryWare/Hindware |
| 51 | S & F in repirs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or equivalent |
| 52 | S & F in repairs angle cock quarter turn with flange chromium plated cast copper alloy screwed down complete all as specified and as directed.Make: Cat part No: F1015201 of CERA or equivalent in ParryWare/Hindware |
| 53 | S & F in repairs 2 in 1 angle cock quarter turn with flange chromium plated cast copper alloy screwed down complete all as specified and as directed.Make: Cat part No: F1015211 of CERA or equivalent in ParryWare/Hindware |
| 54 | S & F in repairs for telephonic hand shower with wall hook complete all as specified and directed.Make: Cat part No: F7030104AB of CERA or equivalent in ParryWare/Hindware |
| 55 | S & F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing with arm/ pipe complete all as specified and directed. Make: Cat part No: F7010212AB of CERA or equivalent in ParryWare/Hindware |
| 56 | S & F in repair Toilet paper holder of stainless steel, complete all as specified and directed. Make: Cat part No: F5014109CH of CERA or equivalent in ParryWare/Hindware |
| 57 | S & F in repairs Multi L-type jet spray any size incl all other accessories complete all as specified and directed. |
| 58 | S & F in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/ semi pedestal and pattern WC (anglo India type) complete all as specified and as directed. |
| 59 | S & F in repairs plastic water closet seat (cascade type) black or white closed pattern, solid type with flat bottom, cover and mild steel chromium plated hinging device complete all as specified and as directed. |
| 60 | S & F in repairs plastic water closet seat (wall hung type) black or white closed pattern, solid type of square shape with flat bottom, cover and mild steel chromium plated hinging device complete all as specified and as directed.Make: Hindware or equivalent in CERA/ PAYRRYWARE |
| 61 | S & F in repairs cascade type syphon-set any size incl all other accessories complete all as specified and directed. |
| 62 | S & F in repair CP Flush plate of size 240 X 155 X 10mm for concealed flushing cistern with two push buttons complete all as specified and directed.Note: Dimensions of plate can be varied by 10% with prior approval of Engineer in Charge but there will not be any extra payment for anything on higher side of dimension |
| 63 | S & F in repair 15 mm bore Stop valves/gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed. |
| 64 | S & F in repair 20 mm bore Stop valve/ gate valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed. |
| 65 | S & F in repairs 32 mm bore PVC flexible pipe for wash hand basin complete all as specified and directed |
| 66 | M & L in repairs waste fittings, brass,chromium plated for glazed ware sink/basin etc, size 32mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specfied and directed. |
| 67 | S & F in replacement 100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 68 | M & L in replacement 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 69 | S & F in repair grating round 100mm size of CP with/without hole complete all as specfied and directed. |
| 70 | S & F in repairs 32mm/40mm Bottle trap of PTMT/CP having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed |
| 71 | S & F in repairs CP Urinal spreader for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed. |
| 72 | S & F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 73 | S & F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 74 | S & F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed |
| 75 | S & F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed |
| 76 | S & F in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed. |
| 77 | S & F in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed. |
| 78 | S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and as directed. |
| 79 | S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and as directed. |
| 80 | S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and directed. |
| 81 | S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and directed. |
| 82 | S & F in repairs 110 mm bore PVC (SWR) door bends any radius complete all as specified and directed. |
| 83 | S & F in repairs 75 mm bore PVC (SWR) door bends any radius complete all as specified and directed |
| 84 | Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete all as specified and directed. (Renewal of builder's hardware if specially ordered shall be measured and paid for separately) |
| 85 | Description all as per item No 84 above but area of shutter exc 2 Sqm |
| 86 | M & L for repair of Steel gate of any size , any shape and any position by taking down steel gate and repair holdfast, uplifting of steel gate, welding to required member, repair/greasing to roller, repair and repositioning of Base Rail , make in true position to revolve, including one coat of synthetic enamal paint complete all as specified and directed. |
| 87 | S & F 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in Each pane including hacking out old broken glass from wooden/steel frames complete all as specified and directed. |
| 88 | Description all as per item No 87 above but figured glass complete all as specified and directed. |
| 89 | Removing existing glass from window panes in which oil putty and MS pins are damaged and making good by providing oil putty and MS Pins including cleaning the glass panes and fixing back in position Complete all as specified and directed. |
| 90 | S & F aluminium door seal up to 1200mm length of best quality complete all as specified and directed. |
| 91 | S & F in repairs 150mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chowkhats as required and complete all as specified and directed. |
| 92 | S & F in repair 0.56mm thick plain aluminium sheeting to doors, straight flashings with aluminium screws complete all as specified and directed. |
| 93 | S & F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.4mm & fixed with Stainless wire staples complete all as specified and directed. |
| 94 | S & F in repair Stainless steel butt hinges of 100mm size complete all as specified and directed. (Note: All screws shall be self tapping chrome plated and length of screw not less than 38 mm) |
| 95 | S & F in repair Stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long (selected quality as approved) complete all as directed and specified. |
| 96 | S & F in repair Stainless steel Tower Bolt of 200 mm long (selected quality as approved) fixed with Self Tapping screws complete all as specfied and directed. |
| 97 | S & F in repair Stainless steel Handle of 150 mm long (selected quality as approved) fixed with Self Tapping screws complete all as specified and directed. |
| 98 | S & F in repair floor door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 99 | S & F in repair brass Handle cast type polished of 150 mm long (selected quality as approved) fixed with Self Tapping screws complete all as specified and directed. |
| 100 | S & F in repair floor door stopper of brass type polished and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 101 | S & F in repair 250 mm long Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed (selected quality as approved) complete all as specified and directed. |
| 102 | S & F in repair brass barrel Tower Bolt of 200 mm long (selected quality as approved) with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 103 | S & F in repairs stainless steel heavy duty tubular curtain rod 20mm dia (weighing not less than 1.03Kg/Rm) and fixed to brackets complete all as specified and as directed. |
| 104 | S & F in repairs stainless steel brackets/end globes designer type suitable for 20mm dia stainless steel heavy duty curtain rod fixed to wall with PVC rawl plug and brass screws etc.,complete all as specified and as directed. |
| 105 | M & L for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc complete all as specified and directed |
| 106 | S & F in repair to 8 mm thick 6063-T-5 Aluminium expendable diamond shape gril for window security mash Decorative of 2.5 cm aperture including nessassary Y Section suitable for the same fixed in aluminum window comlplete all as specified and directed. |
| 107 | S & F in repairs, double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 108 | S & F in repair Dead lock, vertical type 4 lever size 65 mm mild steel body with duplicate keys including key hole with fixing bracket complete all as specified and directed. |
| 109 | S & F in repair mild steel body lock, vertical type, for cup board 65mm size Grade-I, 4 levers with duplicate keys including key hole with fixing bracket complete all as specified and directed. |
| 110 | S & F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60Kg ISI Marked complete all as specified and directed. |
| 111 | S & F 5.00mm thick glass fixed with rubber packing aluminium snap beading and metal pins in skelton shutters of doors and windows including solar control film 25 micron reflective type stick to glass panes as per manufactures instructions including hacking out old broken glass from frames complete all as specified. |
| 112 | M & L for 6 mm thick Ply wood BWR, type BB fixed with screws to walls by inserting rawl plugs in the wall/ column surfaces complete all as specified and directed |
| 113 | Description all as per item No 112 above but 9mm thick. |
| 114 | Description all as per item No 112 above but 12mm thick. |
| 115 | M & L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive complete all as specified and directed |
| 116 | M & L for Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, teRmite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including dismantling existing board complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 117 | M & L for 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 118 | S & F in repair Continuous (piano) hinges, stainless steel, Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed. |
| 119 | S & F in repair Stainless steel Handle of 100 mm size (modular selected quality of design as approved) fixed with Self Tapping screws complete all as specifed and directed. |
| 120 | S & F in repair 200mm long SS decorative soft close zero crank hinges, for kitchen cabnit complete all as specified and directed. |
| 121 | S & F in repairs 200mm long SS decorative handle (modular selected quality of design as approved) fixed with Self Tapping screws complete all as specifed and directed. |
| 122 | S & F in repairs SS telescopic type ball bearing drawer channel of load bearing capacity not exceeding 45 Kg anti-rebound function, manufactured with high grade steel for longevity for easy removal of drawer zinc plated for corrosion resistant suitable for the SS kitchen basket of size not exceeding 500 mm complete all as specified and directed. |
| 123 | S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed |
| 124 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed |
| 125 | S & F in repairs 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing by welding if necessary with 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed |
| 126 | Description all as per item No 125 above but fixing only |
| 127 | S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 Sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & as directed. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Make: Rajshri or equivalent as approved by GE. |
| 128 | S & F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Make: Rajshri or equivalent as approved by GE. |
| 129 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 130 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). |
| 131 | S & F Factory made Double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 132 | S & F of 35mm thick IInd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc. divided in to square with plain chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as per ISI and all as specified in SSR Pt –I and as directed. |
| 133 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 Sqm Each etc including making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and directed. |
| 134 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n.exc 4 Sqm Each etc making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and directed. |
| 135 | Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and directed. |
| 136 | M & L for providing & fixing false ceiling with fully perforated 12mm thick micro tegular edged or 10mm thick square edged false ceiling at all heights with GRG (Glass Fibre reinforced gypsum) false ceiling tiles of size 595 x595 mm approved texture design and patterns having moisture content less than 2% , humidity resistance of 99% , NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (Part 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T Runners of size 14x32mm of length 3000mm cross T of size 15x32 mm of length 1200mm and secondary intermediate cross T of size 12 x32 mm of length 600mm to form grid module of size 600 x600mm ,suspended frm ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm)i.e. 50mm long , 8mm outer diameter M-6 dash fasteners , 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications including dismantling existing ceiling complete all as specified and directed. |
| 137 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness complete all as specified and directed. |
| 138 | M & L for Cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, 75mm thick and finished even and smooth without using extra cement complete all as specified an directed |
| 139 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises complete all as specified and directed. |
| 140 | M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of Each tile exc. 0.06 Sqm but not exc. 0.11 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 141 | M & L for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick on vertical surfaces of walls such as dado set and jointed in neat cement slurry and pointed in white or colour cement to match with PVC beading of matching color at edges including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 142 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:6 completeall as specified and directed. |
| 143 | M & L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of Each tiles n exc 0.36 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 144 | M & L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of Each tiles n exc 0.36 Sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 145 | M & L for Virified Ceramic tiles Dark shade double charged 10 mm thick (square/ rectangular) polished, area of Each tiles exc 0.42 Sqm but n exc 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 146 | M & L for Virified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of Each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in Skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over with PVC beading of matching color at edges including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 147 | M & L for Textured heavy duty exterior tiles of size 300mmx300mmx10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15mm thick in CM (1:6) complete all as specified and directedMake: Johnson Endura textured design or equivalent of Kajaria/Somany. |
| 148 | Dismantling existing interlocking tiles, paver block, removing rubbish off the premises and laying the same tiles/ blocks, 60mm thick, in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. |
| 149 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid in any mortar complete all as specified and directed. |
| 150 | M & L for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platfoRms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 151 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and directed. |
| 152 | M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 153 | M & L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and foaming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by M & L for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosroc as approved. |
| 154 | M & L for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed.Make: STP, Asian paint, Berger paint, Pidilite, Fosroc |
| 155 | Demolotion of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed |
| 156 | M & L for brick work with fly ash bricks straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 complete all as specified and as directed. |
| 157 | Taking down cement plaster on brick or stone walls/ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 158 | M & L for 15mm thick Rendering on fair faces of brick work or concrete surfaces of walls in CM1:4 including finishing the surfaces complete all as specified and directed. |
| 159 | M & L for 10mm thick Rendering on fair faces of brick work or concrete surfaces of wall in CM1:6 complete all as specified and directed. |
| 160 | M & L for 5mm thick Rendering on fair faces of brick work or concrete surfaces of ceiling in CM1:3 complete all as specified and directed. |
| 161 | M & L for preparartion of new wall surfaces & applying two coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. |
| 162 | M & L for preparation of new wall surfaces & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over wall/concrete surfaces of any height complete all as specfied and directed. |
| 163 | M & L for preparartion of new ceiling surfaces & applying two coats of OBD over a coat of primer complete all as specified and directed. |
| 164 | M & L Complete removal of existing treatment of old plastered internal surfaces of wall and applying a coat of OBD complete all as specified and directed. |
| 165 | M & L for cleaning of surface with water using pressure washer machine, fill the crack with acrylic based textured crack filler and applying one coats of modified first quality acrylic exterior emulsion paint of approved shade having silicon additives complete all as specified and as directed. |
| 166 | M & L second class plain fillets square rectangular or triangular exc 3 & n exc 6 sqcm in section clean swan secured with nail complete all as specified and directed. |
| 167 | Running weldings in repairs thickness of metal n exc 6 mm complete all as specified and directed. |
| 168 | description all as per item no.167 but thickness of metal exc 6 but n exc 9 mm complete all as specified and directed. |
| 169 | Welding in repairs n. exc 2.5cm in length thickness of metal n exc 6 mm complete all as specified and directed. |
| 170 | Welding in repairs n. exc 2.5cm in length thickness of metal exc 6 mm but n exc 9 mm complete all as specified and directed. |
| 171 | Welding in repairs exc 2.5cm but n exc 5 cm in length thickness of metal n exc 6 mm complete all as specified and directed. |
| 172 | S & F for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and directed. |
| 173 | M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 174 | M & L for repair to Toughened glass door/Partition of any size/any description by re-setting floor spring, locking arrangement, Hinges, Patches & Handles etc including all other necessary fittings either by adjusting or by the taking off from present position and refixing in the same position as specified and directed |
| 175 | S & F 12mm thick factory made toughened frosted glass door shutters/wall partition incluidng CDM logo embedded (wherever required) including providing and fixing of top & bottom pivot & spring type fixing arrangements, making necessary holes in floor, making good, required hinges, CP Patches, locking arrangements etc and including all necessary fittings complete all as specified and directed. |
| 176 | S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 177 | S & F 450mm long stainless steel handle as in glass doors complete all as specified and directed. |
| 178 | S &F in repairs locking arrangement for toughened glass door including all necessary fittings complete all as specified and directed. |
| 179 | M & L for Sensor door repairs including all other accessories etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender