Tender For Construction Of Certain Smq (G+7, 28 Qtrs) Under Ge(Af) Ojhar
Tender Value
10.88 Crore
Estimated cost
Bid Submission
11 Sep 2026
19 days left
EMD
8.69 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Certain Smq (G+7, 28 Qtrs) Under Ge(Af) Ojhar
BOQ
| Sl. No. | Item Description |
| 1 | Blank |
| 2 | Blank |
| 3 | Blank |
| 4 | Blank |
| 5 | Blank |
| 6 | Blank |
| 7 | Blank |
| 8 | Blank |
| 9 | Blank |
| 10 | Blank |
| 11 | Blank |
| 12 | SCH 'A' PART XIII (MISC B/R & E/M ITEMS) Note:- Excavation and Earthwork to the extent required for execution of relevant item under this schedule unless otherwise specified shall be measured and paid under relevant items of Schedule 'A' Part-II. |
| 13 | INTERNAL ELECTRIFICATION |
| 14 | Supply and fix ceiling fan 230V, 50 Hz AC, 1200mm sweep, min. air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as specified and directed. |
| 15 | Supply and fix Modular Fan regulator electronic step type 230 V 2 Module complete all as specified and as directed. |
| 16 | Supply and fix Exhaust fan 250 mm sweep, 4 blade ( PVC ) with louvers, operated on 230/240V AC Single phase electric supply complete duly grauted bolts in the wall fixed with nuts, bolt and washers complete matching with the existing including connecting with 3 core stranded copper conductor cable cord as per manufacturers recommendation from ceiling rose to exhaust fan connector complete all as specified and directed. |
| 17 | Supply and fix Exhaust fan 300 mm sweep, 4 blade ( Metal ) with louvers, operated on 230/240V AC Single phase electric supply complete duly grauted bolts in the wall fixed with nuts, bolt and washers complete matching with the existing including connecting with 3 core stranded copper conductor cable cord as per manufacturers recommendation from ceiling rose to exhaust fan connector complete all as specified and directed. |
| 18 | Supply, installation, testing and commissioning of Electric water heater, storage type with Glass line coated vertical inner tank(with 7 years warranty) and heating element upto 2 KW of capacity 25 litre suitable to withstand 8 bar pressure , BEE 5 Star rated,compact cube shape design for smaller bathrooms & weather proof IPX4 steel body, complete with all mounting accessories connection piece etc. complete all as specified and as directed. |
| 19 | Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 20 | Supply and fixing LED lights fitting 1x 10 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 21 | Supply and fixing LED Lamp 9 watt 220 volts AC of suitable size complete all as specified and as directed. |
| 22 | Supply and fixing LED Building Security light fitting 25 watt including GI light grade pipe 1.5 m long bend to 45 degree and of diameter 25 mm suitable to building security light power cord pipe diameter with necessary clamps of for fixing building security light all as specified and directed including making hole to wall if necessary complete all as specified and directed. |
| 23 | Supply & Fixing of Sheet Metal Enclosure for 4 Way Distribution Board (DB), Double Door, TPN type, complete with 100 Amp rated Aluminium/Copper Bus Bar, IP-43 degree of protection, suitable for fixing MCCB/RCBO/MCB/Isolators, including all internal wiring, connections, earthing, gland plate, hardware and accessories complete as required and directed. (LIFT DB-1 & LIFT DB-2)Incoming :a) Supply & Fixing of MCCB – 40 Amp, 4 Pole, 415V AC, 35kA fault level, adjustable/fixed thermal magnetic protection, complete with accessories.Outgoing:b) Supply & Fixing of RCBO – 32 Amp, 4 Pole, 30mA sensitivity, 415V AC, suitable for lift supply, complete with neutral protection and accessories – 01 No.c) Supply & Fixing of MCB – SPN, 16 Amp, 10kA/6kA, 240/415V AC, suitable for Machine Room Light supply, complete with accessories – 01 No.Notes: DB shall be suitable for indoor installation. Bus bar rating: 100A TPN with neutral link. Enclosure: CRCA sheet steel, powder coated, minimum 1.6 mm thick complete with numbering ferrules, danger plate, cable glands, lugs, and earthing arrangement. |
| 24 | Supply, installation, testing and commissioning of Smart RF/Cellular Single Phase AC Smart Meter Tamper Proof, Static Meter of Class 1.0, 315 V, 50 Hz, 05 A- 30A conforming to IS-16444 and relevant IEC standards with inbuilt Radio Frequency communication facility with self healing mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitary and shall be compatible to be fitted in Meter Panel in a specified space. Meter Should support sending the following data : 15/30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, monthly billing survey for Cumulative Energy and Max Demand to software. Meter should have connect / disconnect functionality operable from mdm/billing software and prepaid features would be MDM / Billing end as per prevalent IS . Note : Contractor has to ensure integration and maintenance of the above Nos of meters with the existing Advance Metering Infrastructure (AMI) of Smart Meters of different makes without any additional infrastructure and cost implication. |
| 25 | Supply, installation, testing and commissioning of 600 mm wide & 50 mm in height perforated type GI cable tray of 3 m length sections made of minimum 2.0 mm thick mild steel sheet, hot dip galvanized after fabrication with minimum 80 micron zinc coating, complete with GI coupler plates, nuts, bolts, bends, tees, reducers, vertical/horizontal supports, hangers, clamps and accessories as required, properly aligned and fixed to ceiling/wall/structure including continuous earthing/bonding between tray sections, complete all as specified and as directed. |
| 26 | LIGHTENING PROTECTION |
| 27 | Supply and Fix epoxy insulator duly coloured with necessary fixing arrangement on wall and roof for fixing of down conductor complete all as specified and as directed |
| 28 | FIRE DETECTION AND ALARM SYSTEM |
| 29 | Supply , Installation, Testing and Commissioning of terrace Booster pumps for 440V, 3 phase, 50Hz with control panel for automatic operation confirming to IS-12469 : 1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50Hz 36m head, 900 LPM discharge. Pump should be mounted on suitable base frame embedded in PCC complete all as specified and directed. |
| 30 | Supply, installation, testing and commissioning of Automatic Fire Pump Control Panel for 15 HP, 415V, 3 Phase fire pump, complete with 1 No. CRCA sheet steel enclosure floor/wall mounted powder coated panel, 1 No. 40 A TPN MCCB incomer, 1 No. FASD starter(15 HP) with 1 No. 32A AC-3 rated contactor and 1 No. thermal overload relay suitable for motor rating, 1 No. Auto/Manual selector switch, 2 Nos. pressure switches for automatic starting arrangement, 1 Set start/stop push buttons, 1 Set RYB phase indication lamps, 1 No. ammeter with selector switch, 1 Set pump ON/TRIP indication lamps, 1 No. phase failure relay, 1 No. control MCB, 1 Set control wiring with terminal blocks, internal busbar, cable glands, lugs, earthing terminals and all required accessories, complete in all respects for automatic and reliable operation of 15 HP fire pump system.complete all as specified and as directed. |
| 31 | Supply and fixing branch pipe with nozzle of 20mm dia for hose reel confirming to IS : 8090 complete all as specified and as directed. |
| 32 | Supply and fixing Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete all as specified and as directed. |
| 33 | Supply, fixing and installation of fire exit signage's self illuminating light fixtures displaying exit with an arrow towards the exit door complete all as specified and as directed. |
| 34 | Supply, installation, testing and Commissioning of 16 zone console panel for speakers complete all as specified and as directed. |
| 35 | Supply and laying of 2C x 1.5 sq.mm cable of 1.1KV Grade XLPE , insulated, sheathed steel armoured with Copper Conductor Power Cables including fixing with saddles,screws etc. complete all as specified and as directed. |
| 36 | Supply and laying of 2 core twin twisted 48/.25 ATC,Multi strand, over all armoured speaker cable complete all as specified and as directed. |
| 37 | Supply and Installation of Light weight squeeze grip type CO2 type Fire Extinguisher of 3 kgs capacity with stand made from brand new seamless drawn steel cylinder as per IS: 7285 with ISI mark and Chief of controller of explosives approval, fitted with wheel valve as per IS: 3224 with ISI mark,with discharge hose and horn and supplied complete with initial charge as per IS: 15683 with ISI mark.( for sub stn/panel room) complete all as specified and as directed. |
| 38 | Supply and fixing of Dry powder ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation complete all as specified and as directed. |
| 39 | Supply & Installation of Water Stored pressure type Fire Extinguisher of 9 litres capacity,fitted with discharge control valve (Squeeze grip type) CE marked and pressure gauge, with discharge hose and open nozzle and supplied complete with initial charge as per IS:15683 with ISI mark and wall bracket. Fire Rating 2A, complete all as specified and as directed. |
| 40 | Supply & fixing of 4 Nos of 9 litres capacity round bottom sand /water buckets along with round bottom type , enamel painted white inside and red outside & letter fire in black outside & handle with mounting bracket along with suitable MS stand to install the buckets as per the local fire standards complete all as specified and as directed. |
| 41 | EXTERNAL WATER SUPPLY |
| 42 | Supply, installation, testing and commissioning of Submersible Pump Set having discharge 250 LPM at 40 m head, driven by 7.5 HP, 440 Volts, 3 Phase motor, complete with CI impeller, C-40 steel shaft, gland packing sealing arrangement, TEFC motor with “B” class insulation and IP-44 protection, suitable for continuous operation, complete all as specified and as directed.Note: The pump set shall conform to relevant Indian Standards such as IS 9079 and IS 325. The work shall include providing suitable cement concrete foundation, foundation bolts, vibration pads, MS base frame,alignment, connection with suction and delivery pipelines, electrical connections, testing, commissioning and trial run, complete in all respects as specified and as directed. |
| 43 | Supply, installation, testing and commissioning of Water Supply Pump Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. complete all as specified and as directed. INCOMERMCCB 32 Amp 4 pole 415 v 35 KA (W S) -01 NosOUTGOINGMCB TPN 16 to 32 Amp 415v 35 KA - 02 NosDOL starter suitable for 7.5 HP - 02 NosBUSBAR200 Amps copper bus bar with colour coded heat shrinkable sleeveMETERING & INDICATIONi) Ammeter, Digital type, with suitable CTs - 03 setii) Voltmeter, Digital type - 01 setiii) R-Y-B phase indicating lamp- 01 Nosiv) Multifunction meter-01 No |
| 44 | Supply, installation, testing and commissioning of Submersible Pump Set having discharge capacity 250 LPM at 40 m total head, complete with 7.5 HP, 440 Volts, 3 Phase, 50 Hz submersible motor, suitable for continuous duty operation.The pump shall be of vertical submersible type suitable for installation in water sump/borewell, complete with CI/SS pump body, CI/SS impeller, stainless steel shaft, suitable bearings, mechanical seal arrangement, and corrosion-resistant components. The motor shall be water cooled, submersible type, with Class-B/F insulation, suitable for continuous operation and having minimum IP-68 protection.The work shall include providing and fixing complete pump set with suitable length of submersible cable, cable jointing kit, lifting chain, guide arrangement, delivery pipe connection, non-return valve, sluice valve, bends, flanges, supports, clamps, fasteners, earthing connection, control panel termination, testing, commissioning and trial run.The pump set shall be complete in all respects and shall conform to relevant Indian Standards including IS 8034 / IS 14220 (as applicable) and IS 325 for electric motor, with all accessories required for satisfactory operation as specified and as directed |
| 45 | EXTERNAL ELECTRIC SUPPLY |
| 46 | Supply, installation, testing and commissioning of floor mounted transformer copper wound of capacity 160 KVA, step down, indoor type, 50 HZ, AC, Level -3 , oil immersed naturally air cooled having no load voltage ration 11 KV/433 V complete with standard fittings, HT 11 KV/433 V corresponding to principal tapping double copper wound data connected primary side (HV) side & star connected on secondary side (LV) side in accordance with vector symbol Dyn11 with natural & having tapping on HV side for constant +5% to 10% at 2.5% step by means of manual off load tap changing arrangments, the limit of temperature rise after continuous full load run as measured by oil thermometer temperature rise of top oil shall not exceed 50°C above maximum ambient temperature prevailing at site as per IS 1180 amended up to date (Amendment 4), Total Losses at 50% load at Principal Tap at 75 º C shall be max 0.92 KW as per Level 2 of IS 1180, Total losses at 100% load at Principal Tap at 75 º C shall be max 2.7 KW as per Level 2 of IS 1180, Impedance at 75 º C (IS Tol.) shall be 4.5 % (+10 % to -10% Tol.) , Insulation level at HV side shall be 75 KVp/ 28 KVrms and at LV side shall be -3 kVp/28 kVrms complete including provision of following fitting and accessories complete all as specified and as directed. |
| 47 | (a) Oil conservator with filling hole and cap drain plug & shut valve between conservator & main tank.(b) Silica gel breather with oil seal & first fill of dehydration agent.(c ) Explosion relief vent with diaphragm and pressure release device with equalizing pipe connection to conservator air space.(d) Oil temperature gauge having range 0 to 120 'C with max reading pointer with suitable size..(e) Drain cum bottom filter valve (f) Top filter valve (g) Prismatic oil level gauge (h) Inspection cover(j) Lifting lugs(k) Bi directional plain rollers (l) Rating & diagram plate (m) Separate natural bushing brought out for earthing LV side (n) Air Insulated cable box with disconnecting chamber on HV side (11KV side) including material for XLPE cable upto 120 Sqmm cable 3 core excluding cable jointing kit (o) Air Insulated cable box with disconnecting chamber on LV side (433 V side) including material for XLPE cable upto 400 Sqmm cable 3.5 Core excluding cable jointing kit. (Orientation between HV & LV : 180 degree)(p) Earthing terminal -02 Nos(r ) First filling of transformer oil confirming to IS-335 |
| 48 | (a) Oil conservator with filling hole and cap drain plug & shut valve between conservator & main tank.(b) Silica gel breather with oil seal & first fill of dehydration agent.(c ) Explosion relief vent with diaphragm and pressure release device with equalizing pipe connection to conservator air space.(d) Oil temperature gauge having range 0 to 120 'C with max reading pointer with suitable size..(e) Drain cum bottom filter valve (f) Top filter valve (g) Prismatic oil level gauge (h) Inspection cover(j) Lifting lugs(k) Bi directional plain rollers (l) Rating & diagram plate (m) Separate natural bushing brought out for earthing LV side (n) Air Insulated cable box with disconnecting chamber on HV side (11KV side) including material for XLPE cable upto 120 Sqmm cable 3 core excluding cable jointing kit (o) Air Insulated cable box with disconnecting chamber on LV side (433 V side) including material for XLPE cable upto 400 Sqmm cable 3.5 Core excluding cable jointing kit. (Orientation between HV & LV : 180 degree)(p) Earthing terminal -02 Nos(r ) First filling of transformer oil confirming to IS-335 |
| 49 | Blank |
| 50 | Blank |
| 51 | Blank |
| 52 | Blank |
| 53 | Blank |
| 54 | Blank |
| 55 | Blank |
| 56 | Blank |
| 57 | Blank |
| 58 | Blank |
| 59 | Blank |
| 60 | SCH 'A' PART XIII (MISC B/R & E/M ITEMS) Note:- Excavation and Earthwork to the extent required for execution of relevant item under this schedule unless otherwise specified shall be measured and paid under relevant items of Schedule 'A' Part-II. |
| 61 | INTERNAL ELECTRIFICATION |
| 62 | Supply and fix ceiling fan 230V, 50 Hz AC, 1200mm sweep, min. air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as specified and directed. |
| 63 | Supply and fix Modular Fan regulator electronic step type 230 V, 2 Module complete all as specified and as directed. |
| 64 | Supply and fix Exhaust fan 250 mm sweep, 4 blade ( PVC ) with louvers, operated on 230/240V AC Single phase electric supply complete duly grauted bolts in the wall fixed with nuts, bolt and washers complete matching with the existing including connecting with 3 core stranded copper conductor cable cord as per manufacturers recommendation from ceiling rose to exhaust fan connector complete all as specified and directed. |
| 65 | Supply and fix Exhaust fan 300 mm sweep, 4 blade ( Metal ) with louvers, operated on 230/240V AC Single phase electric supply complete duly grauted bolts in the wall fixed with nuts, bolt and washers complete matching with the existing including connecting with 3 core stranded copper conductor cable cord as per manufacturers recommendation from ceiling rose to exhaust fan connector complete all as specified and directed. |
| 66 | Supply, installation, testing and commissioning of Electric water heater, storage type with Glass line coated vertical inner tank(with 7 years warranty) and heating element upto 2 KW of capacity 25 litre suitable to withstand 8 bar pressure , BEE 5 Star rated,compact cube shape design for smaller bathrooms & weather proof IPX4 steel body, complete with all mounting accessories connection piece etc. complete all as specified and as directed. |
| 67 | Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 68 | Supply and fixing LED lights fitting 1x 10 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 69 | Supply and fixing LED Lamp 9 watt 220 volts AC of suitable size complete all as specified and as directed. |
| 70 | Supply and fixing LED Building Security light fitting 25 watt including GI light grade pipe 1.5 m long bend to 45 degree and of diameter 25 mm suitable to building security light power cord pipe diameter with necessary clamps of for fixing building security light all as specified and directed including making hole to wall if necessary complete all as specified and directed. |
| 71 | Supply & Fixing of Sheet Metal Enclosure for 4 Way Distribution Board (DB), Double Door, TPN type, complete with 100 Amp rated Aluminium/Copper Bus Bar, IP-43 degree of protection, suitable for fixing MCCB/RCBO/MCB/Isolators, including all internal wiring, connections, earthing, gland plate, hardware and accessories complete as required and directed. (LIFT DB-1 & LIFT DB-2)Incoming :a) Supply & Fixing of MCCB – 40 Amp, 4 Pole, 415V AC, 35kA fault level, adjustable/fixed thermal magnetic protection, complete with accessories.Outgoing:b) Supply & Fixing of RCBO – 32 Amp, 4 Pole, 30mA sensitivity, 415V AC, suitable for lift supply, complete with neutral protection and accessories – 01 No.c) Supply & Fixing of MCB – SPN, 16 Amp, 10kA/6kA, 240/415V AC, suitable for Machine Room Light supply, complete with accessories – 01 No.Notes: DB shall be suitable for indoor installation. Bus bar rating: 100A TPN with neutral link. Enclosure: CRCA sheet steel, powder coated, minimum 1.6 mm thick complete with numbering ferrules, danger plate, cable glands, lugs, and earthing arrangement. |
| 72 | Supply, installation, testing and commissioning of Smart RF/Cellular Single Phase AC Smart Meter Tamper Proof, Static Meter of Class 1.0, 315 V, 50 Hz, 05 A- 30A conforming to IS-16444 and relevant IEC standards with inbuilt Radio Frequency communication facility with self healing mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitary and shall be compatible to be fitted in Meter Panel in a specified space. Meter Should support sending the following data : 15/30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, monthly billing survey for Cumulative Energy and Max Demand to software. Meter should have connect / disconnect functionality operable from mdm/billing software and prepaid features would be MDM / Billing end as per prevalent IS . Note : Contractor has to ensure integration and maintenance of the above Nos of meters with the existing Advance Metering Infrastructure (AMI) of Smart Meters of different makes without any additional infrastructure and cost implication. |
| 73 | Supply, installation, testing and commissioning of 600 mm wide & 50 mm in height perforated type GI cable tray of 3 m length sections made of minimum 2.0 mm thick mild steel sheet, hot dip galvanized after fabrication with minimum 80 micron zinc coating, complete with GI coupler plates, nuts, bolts, bends, tees, reducers, vertical/horizontal supports, hangers, clamps and accessories as required, properly aligned and fixed to ceiling/wall/structure including continuous earthing/bonding between tray sections, complete all as specified and as directed. |
| 74 | LIGHTENING PROTECTION |
| 75 | Supply and Fix epoxy insulator duly coloured with necessary fixing arrangement on wall and roof for fixing of down conductor complete all as specified and as directed |
| 76 | FIRE DETECTION AND ALARM SYSTEM |
| 77 | Supply , Installation, Testing and Commissioning of terrace Booster pumps for 440V, 3 phase, 50Hz with control panel for automatic operation confirming to IS-12469 : 1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50Hz 36m head, 900 LPM discharge. Pump should be mounted on suitable base frame embedded in PCC complete all as specified and directed. |
| 78 | Supply, installation, testing and commissioning of Automatic Fire Pump Control Panel for 15 HP, 415V, 3 Phase fire pump, complete with 1 No. CRCA sheet steel enclosure floor/wall mounted powder coated panel, 1 No. 40 A TPN MCCB incomer, 1 No. FASD starter(15 HP) with 1 No. 32A AC-3 rated contactor and 1 No. thermal overload relay suitable for motor rating, 1 No. Auto/Manual selector switch, 2 Nos. pressure switches for automatic starting arrangement, 1 Set start/stop push buttons, 1 Set RYB phase indication lamps, 1 No. ammeter with selector switch, 1 Set pump ON/TRIP indication lamps, 1 No. phase failure relay, 1 No. control MCB, 1 Set control wiring with terminal blocks, internal busbar, cable glands, lugs, earthing terminals and all required accessories, complete in all respects for automatic and reliable operation of 15 HP fire pump system.complete all as specified and as directed. |
| 79 | Supply and fixing branch pipe with nozzle of 20mm dia for hose reel confirming to IS : 8090 complete all as specified and as directed. |
| 80 | Supply and fixing Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete all as specified and as directed. |
| 81 | Supply, fixing and installation of fire exit signage's self illuminating light fixtures displaying exit with an arrow towards the exit door complete all as specified and as directed. |
| 82 | Supply, installation, testing and Commissioning of 16 zone console panel for speakers complete all as specified and as directed. |
| 83 | Supply and laying of 2C x 1.5 sq.mm cable of 1.1KV Grade XLPE , insulated, sheathed steel armoured with Copper Conductor Power Cables including fixing with saddles,screws etc. complete all as specified and as directed. |
| 84 | Supply and laying of 2 core twin twisted 48/.25 ATC,Multi strand, over all armoured speaker cable complete all as specified and as directed. |
| 85 | Supply and Installation of Light weight squeeze grip type CO2 type Fire Extinguisher of 3 kgs capacity with stand made from brand new seamless drawn steel cylinder as per IS: 7285 with ISI mark and Chief of controller of explosives approval, fitted with wheel valve as per IS: 3224 with ISI mark,with discharge hose and horn and supplied complete with initial charge as per IS: 15683 with ISI mark.( for sub stn/panel room) complete all as specified and as directed. |
| 86 | Supply and fixing of Dry powder ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation complete all as specified and as directed. |
| 87 | Supply & Installation of Water Stored pressure type Fire Extinguisher of 9 litres capacity,fitted with discharge control valve (Squeeze grip type) CE marked and pressure gauge, with discharge hose and open nozzle and supplied complete with initial charge as per IS:15683 with ISI mark and wall bracket. Fire Rating 2A, complete all as specified and as directed. |
| 88 | Supply & fixing of 4 Nos of 9 litres capacity round bottom sand /water buckets along with round bottom type , enamel painted white inside and red outside & letter fire in black outside & handle with mounting bracket along with suitable MS stand to install the buckets as per the local fire standards complete all as specified and as directed. |
| 89 | EXTERNAL WATER SUPPLY |
| 90 | Supply, installation, testing and commissioning of Submersible Pump Set having discharge 250 LPM at 40 m head, driven by 7.5 HP, 440 Volts, 3 Phase motor, complete with CI impeller, C-40 steel shaft, gland packing sealing arrangement, TEFC motor with “B” class insulation and IP-44 protection, suitable for continuous operation, complete all as specified and as directed.Note: The pump set shall conform to relevant Indian Standards such as IS 9079 and IS 325. The work shall include providing suitable cement concrete foundation, foundation bolts, vibration pads, MS base frame,alignment, connection with suction and delivery pipelines, electrical connections, testing, commissioning and trial run, complete in all respects as specified and as directed. |
| 91 | Supply, installation, testing and commissioning of Water Supply Pump Panel of suitable size, factory made, CPRI type tested, indoor, cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 mm x 50 mm x 6 mm, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length size, including fixing lugs bolts, screws etc. complete all as specified and as directed. INCOMERMCCB 32 Amp 4 pole 415 v 35 KA (W S) -01 NosOUTGOINGMCB TPN 16 to 32 Amp 415v 35 KA - 02 NosDOL starter suitable for 7.5 HP - 02 NosBUSBAR200 Amps copper bus bar with colour coded heat shrinkable sleeveMETERING & INDICATIONi) Ammeter, Digital type, with suitable CTs - 03 setii) Voltmeter, Digital type - 01 setiii) R-Y-B phase indicating lamp- 01 Nosiv) Multifunction meter-01 No |
| 92 | Supply, installation, testing and commissioning of Submersible Pump Set having discharge capacity 250 LPM at 40 m total head, complete with 7.5 HP, 440 Volts, 3 Phase, 50 Hz submersible motor, suitable for continuous duty operation.The pump shall be of vertical submersible type suitable for installation in water sump/borewell, complete with CI/SS pump body, CI/SS impeller, stainless steel shaft, suitable bearings, mechanical seal arrangement, and corrosion-resistant components. The motor shall be water cooled, submersible type, with Class-B/F insulation, suitable for continuous operation and having minimum IP-68 protection.The work shall include providing and fixing complete pump set with suitable length of submersible cable, cable jointing kit, lifting chain, guide arrangement, delivery pipe connection, non-return valve, sluice valve, bends, flanges, supports, clamps, fasteners, earthing connection, control panel termination, testing, commissioning and trial run.The pump set shall be complete in all respects and shall conform to relevant Indian Standards including IS 8034 / IS 14220 (as applicable) and IS 325 for electric motor, with all accessories required for satisfactory operation as specified and as directed. |
| 93 | EXTERNAL ELECTRIC SUPPLY |
| 94 | Supply, installation, testing and commissioning of floor mounted transformer copper wound of capacity 160 KVA, step down, indoor type, 50 HZ, AC, Level -3 , oil immersed naturally air cooled having no load voltage ration 11 KV/433 V complete with standard fittings, HT 11 KV/433 V corresponding to principal tapping double copper wound data connected primary side (HV) side & star connected on secondary side (LV) side in accordance with vector symbol Dyn11 with natural & having tapping on HV side for constant +5% to 10% at 2.5% step by means of manual off load tap changing arrangments, the limit of temperature rise after continuous full load run as measured by oil thermometer temperature rise of top oil shall not exceed 50°C above maximum ambient temperature prevailing at site as per IS 1180 amended up to date (Amendment 4), Total Losses at 50% load at Principal Tap at 75 º C shall be max 0.92 KW as per Level 2 of IS 1180, Total losses at 100% load at Principal Tap at 75 º C shall be max 2.7 KW as per Level 2 of IS 1180, Impedance at 75 º C (IS Tol.) shall be 4.5 % (+10 % to -10% Tol.) , Insulation level at HV side shall be 75 KVp/ 28 KVrms and at LV side shall be -3 kVp/28 kVrms complete including provision of following fitting and accessories complete all as specified and as directed. |
| 95 | (a) Oil conservator with filling hole and cap drain plug & shut valve between conservator & main tank.(b) Silica gel breather with oil seal & first fill of dehydration agent.(c ) Explosion relief vent with diaphragm and pressure release device with equalizing pipe connection to conservator air space.(d) Oil temperature gauge having range 0 to 120 'C with max reading pointer with suitable size..(e) Drain cum bottom filter valve (f) Top filter valve (g) Prismatic oil level gauge (h) Inspection cover(j) Lifting lugs(k) Bi directional plain rollers (l) Rating & diagram plate (m) Separate natural bushing brought out for earthing LV side (n) Air Insulated cable box with disconnecting chamber on HV side (11KV side) including material for XLPE cable upto 120 Sqmm cable 3 core excluding cable jointing kit (o) Air Insulated cable box with disconnecting chamber on LV side (433 V side) including material for XLPE cable upto 400 Sqmm cable 3.5 Core excluding cable jointing kit. (Orientation between HV & LV : 180 degree)(p) Earthing terminal -02 Nos(r ) First filling of transformer oil confirming to IS-335 Please Enable Macros to View BoQ information |
| 96 | (a) Oil conservator with filling hole and cap drain plug & shut valve between conservator & main tank.(b) Silica gel breather with oil seal & first fill of dehydration agent.(c ) Explosion relief vent with diaphragm and pressure release device with equalizing pipe connection to conservator air space.(d) Oil temperature gauge having range 0 to 120 'C with max reading pointer with suitable size..(e) Drain cum bottom filter valve (f) Top filter valve (g) Prismatic oil level gauge (h) Inspection cover(j) Lifting lugs(k) Bi directional plain rollers (l) Rating & diagram plate (m) Separate natural bushing brought out for earthing LV side (n) Air Insulated cable box with disconnecting chamber on HV side (11KV side) including material for XLPE cable upto 120 Sqmm cable 3 core excluding cable jointing kit (o) Air Insulated cable box with disconnecting chamber on LV side (433 V side) including material for XLPE cable upto 400 Sqmm cable 3.5 Core excluding cable jointing kit. (Orientation between HV & LV : 180 degree)(p) Earthing terminal -02 Nos(r ) First filling of transformer oil confirming to IS-335 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender