Tender For Painting & Poloshing And Repair To Misc Fur Under Ge Narangi
Tender Value
45 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Painting & Poloshing And Repair To Misc Fur Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Polishing description: Material and labour preparation of wooden surfaces by cleaning, scrapping through emery paper or electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying French polish to get the glossy finish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture as specified. |
| 2 | Chair Dining (FD-228, 262, 270, 279 & 285) |
| 3 | Chair writing (FD-280) |
| 4 | Chair Easy (FD-201 & 229) |
| 5 | Table Peg (FD-277 & 384) |
| 6 | Table Centre (FD-274, 267 & 393) |
| 7 | Teapoy wooden (FD-278 & 382) |
| 8 | Table 3'x2' with drawer (FD-283) |
| 9 | Table 3'x2' without drawer (FD-284) |
| 10 | Table dining 4’ x 3’ (FD/MAP-II/03) |
| 11 | Table dining 6 person (FD-269, 273 & FD/MAP-II/03) |
| 12 | Table dining 8 person (FD-273 & FD/MAP-II/03) |
| 13 | Table writing (FD-249 & 275) |
| 14 | Sofa set 5 seater (FD-281, 373 & FD/MAP-II/02) |
| 15 | Sofa Set 4 seater (FD-281, 373 & FD/MAP-II/02) |
| 16 | Table 3x3 wooden (FD-88 & 291) |
| 17 | Bed with plytop (FD-246 & 247) |
| 18 | Table dressing (Ladies) (FD-251, 378 & FD/E6/MAP/16) |
| 19 | Table dressing gents (FD-230, 379 & FD/E6/MAP/14) |
| 20 | Hat Stand with Mirror (FD-233/362) |
| 21 | Chair Dining with cushioned seat (FD/MAP-II/04) |
| 22 | Table Office clerk wooden (DB-4120) |
| 23 | Table Office officer (DB-4119) |
| 24 | Bin Soiled Linen /Side board (FD/E6/MAP/09,FD-241 /371) |
| 25 | Book Shelf open large (DB-4122) |
| 26 | Trestle SR Wooden (DB-4101) |
| 27 | Painting of Steel Furniture : Material and labour for preparation of old painted steel surfaces of furniture item i.e filliing all holes/cracks or detoriated spots with putty, primer then by cleaning and applying one coat of synthetic enamel paint ( olive green/black/Hamertone/ white/grey) with spray gun or by manual brush and roller in appropriate shade complete all as per requirement |
| 28 | Almirah Large Steel with shelves both side (outside and inside). (FD-67,FD-1031) |
| 29 | Almirah Medium Steel with shelves both side (FD-67,350,1032) |
| 30 | Locker Steel both side (FD-1029) |
| 31 | Locker Steel TP |
| 32 | Book case steel both side (FD-1028) |
| 33 | Bed hard steel (FD/E6/MAP/08) |
| 34 | Charpoy IP Hard Top. (FD/MAP-II/01) |
| 35 | Chair CB steel with arms (FD-75M) |
| 36 | Form without back (steel frame only). (FD-78M) |
| 37 | Table Office Clerk Steel (FD-84,FD-1004) |
| 38 | Table 3’x2’ Steel with drawer and without drawer.(FD-1007,1008) |
| 39 | Table Dining OR. (FD-165) |
| 40 | Chair Varandah white colour (FD-359) |
| 41 | Rack 6 tier Steel (FD-255,383, FD/E6/MAP/17) |
| 42 | Trestle SR Iron (FD-86 (M)) |
| 43 | Rack Shoe steel (FD/E6/MAP/02 (R)) |
| 44 | Box kit Steel (FD-98M) |
| 45 | Almirah/Locker repair |
| 46 | Material and labour for removing old unserviceable existing handle and Supply and fix new chromium plated handles including necessary nut, bolts, washer etc for Almirah Large Steel/ Almirah Medium Steel. (FD 1031, 1032, E/6/MAP/18) |
| 47 | Material and labour for removing unserviceable lock from Almirah Medium Steel/ Almirah Large Steel and Supply and fix new 6 lever brass lock with duplicate keys complete all as specified. (FD 1031, 1032, E/6/map/18) |
| 48 | Material and labour for taking out old unserviceable handle of Locker Steel and Supply and fix new chromium plated handles including necessary nut, bolts, washer etc. (FD 1029) |
| 49 | Material and labour for removing unserviceable Hasp and Staple and Supply and fix new set of Hasp and Staple complete with screw, nut, washer etc. |
| 50 | Material and labour for removing existing shelves and making the same in functioning condition including necessary nuts, bolts, clits and washer etc of Almirah Large Steel/ Almirah Medium Steel all as directed. |
| 51 | Repairs to Table |
| 52 | Material and labour for removing old unserviceable lock of drawers of Table office officer steel/ Table office clerk steel and Supply and fix new brass lock with four levers and duplicate keys. (FD-1004,1003) |
| 53 | Material and labour for removing existing drawers of Table office officer steel/ Table office clerk steel/ Table 3' x 2' steel and re-fixing the same after necessary setting of drawers for free movement all as directed. (FD-1004, 1003, 1008) |
| 54 | Material and labour for removing old unserviceable channel and Supply and fix new telescopic channel of size 10/12 inch in computer table. (FD/E6/Map/03, FD/E6/Map/15, TP) |
| 55 | Material and labour for taking out unserviceable round lock and Supply and fix new round lock with two keys in tables as per trade pattern. (TP, FD/E6/Map/03) |
| 56 | Supply and fix PVC/Rubber shoe of Tables as per drg (FD-1003, 1004, 1007 to 1008) |
| 57 | Repair to Sofa/ Chair |
| 58 | Replacement of tapestry cloth cover of cushions of sofa set 4/5 seater and supply & fix new tapestry cloth cover of size 560 x 535 x 100mm thick on existing cushion with valcrow on one edge of best quality. The cost of tapestry cloth to be not less than Rs 250/- per meter. (FD-272,281, FD/MAP-II/02) |
| 59 | Replacement of existing foam cushions of Sofa set 04/05 seater including existing tapestry cloth of sofa set 4/5 seater, and supply & fix new PU Moulded Foam 32 kg per cubic meter density of size 560 x 535 x 100mm thick, duly stitched with tapestry cloth and closed with valcrow of suitable size complete all as directed and shown on drg . Make: Sleepwell, Kurlon or equivalent as approved by GENote: (Tapestry cloth shall not be less than Rs. 250.00 Per RM). |
| 60 | Material and labour for taking down old unsv cushion seat cover and Supply and fix new seat cover of chair dining officer duly stiched as per size specified in drg.Note :- Rate of cushion cloth cover should not be less than Rs. 250 per meter. |
| 61 | Replacement of PVC seat back from chair varandah (FD/E6/Map/15) |
| 62 | Replacement of TOP: Taking out unserviceable top from Table and Supply and fix new top made out of 18mm thick particle board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg. |
| 63 | Table office clerk steel. (FD-1004) |
| 64 | Table of size 3’x2’ with or without drawer. (FD-283,284,1007,1008) |
| 65 | Table Peg (FD-277 & 384) |
| 66 | Table Centre (FD-274, 267 & 393) |
| 67 | Teapoy wooden (FD-278 & 382) |
| 68 | Table dining 4’ x 3’ (FD/MAP-II/03) |
| 69 | Table dining 6 person (FD-269, 273 & FD/MAP-II/03) |
| 70 | Table writing (FD-249 & 275) |
| 71 | REPAIRS TO CHARPOY GI PIPE PLYWOOD TOP (FD-220) |
| 72 | Material and labour for tightening of charpoy frame, check nuts, elbow and removing old unserviceable plywood/MDF board from Charpoy GI and Supply and fix of new BWR grade, ISI marked ply of size 1980X900x12 mm thick, fixed with 08 Nos of suitable round headed nut bolts and washer as approved in each charpoy through suitable drill machine holes of appropriate size, two on each short and long rail and Supply and fix 02 Nos of angle iron stiffners of size (900x25x3mm) duly painted black complete all as directed. |
| 73 | Material and labour for removing of old Long Rail of Charpoy GI and Supply and fix new long rail of 32mm dia GI pipe, medium grade, ISI marked duly threaded both sides as required. |
| 74 | Material and labour for Conversion of Long Rails of Charpoy GI Pipe ( retrieved under Item No. 7.02) into Short Rail by cutting/ finishing to shape & threading and replacing the same as required against unserviceable short rail. |
| 75 | Material and labour for Conversion of Short Rails ( retrieved under Item No. 7.03) into Leg by cutting/ finishing to shape & threading and replacing the same as required against unserviceable short rail. |
| 76 | Material and labour for removing old unservieable Elbow from Charpoy GI and Supply and fix new 32mm bore, 3 ways, ISI marked, medium grade GI elbow complete all as directed. |
| 77 | Material and labour for removing old unserviceable check nut from Charpoy GI and Supply and fix new 32mm bore, 6mm thick, galvanised iron, medium grade check nut complete all as directed. |
| 78 | Repair to Charpoy IP Hardtop (FD/Map-II/01) |
| 79 | Material and labour for removing of old unserviceable Long Rail of Charpoy IP Hardtop and Supply and fix new long rail of 65 x 25 x1916 mm rectangular pipe 16 Gauge IISI marked along with welding of supports and short rail to make it perfect frame of Charpoy. The replaced part shall be smoothened duly removing welding spots and painting black enamel paint after applying redoxide coat. All as per drg and directed. |
| 80 | Material and labour for removing of old unserviceable Head/Foot board assy of Charpoy IP Hardtop and Supply and fix by welding new assy of size as per drawing. The replaced part shall be smoothened duly removing welding spots and painting black enamel paint after applying redoxide coat. All as per drg and directed. (FD/Map-II/01) |
| 81 | Material and labour for removing of old unserviceable support stiffner of Charpoy IP Hardtop and Supply and fix by welding new support stiffner of size as per drawing. The replaced part shall be smoothened duly removing welding spots and painting black enamel paint after applying redoxide coat. All as per drg and directed. (FD/Map-II/01) |
| 82 | Supply and fix of rubber Shoe in Charpoy IP Hardtop. (FD/Map-II/01)Note- 04 Nos in one Charpoy will be measured as one unt |
| 83 | Material and labour for removing of old unserviceable ply wood of Charpoy IP Hardtop and Supply and fix new BWR grade, phenol bounded, commercial plywood with the help of nut, bolts including suitable washer as per drg and directed. (FD/Map-II/01) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender