Tender For Special Repairs To Roof Of Sre Bldg At Afs Yelahanka.
Tender Value
43.66 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
87330
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Roof Of Sre Bldg At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface etc complete all as specified & directed. |
| 2 | Demolition of concrete( unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc all as specified and as directed. |
| 3 | M&L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate with over cement slurry 3 kg of cement per sqm finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed.Note:- supply only of water proofing compound will be measured and paid seperately under relevant item. |
| 5 | M&L for laying/fixing TPO membrane of non flammable water proofing of roof which shall be a 1.50 mm thick loose laid membrane using FOSROC Proofex ORG membrane or its equivalent in STP/CIPY/SIKA/PIDILITE DR FIXIT, in layers overlapped to achive a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the roll either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non woven geotextile fiber. The separation layer provided to prevent the mechanical abrasion and and cushioning between the fosroc proofex ORG and the concrete sub structure. The termination of Fosroc Proofex ORG by aluminium strip anchoring complete all as specified and directed. Note: Work shall be executed by authorized applicator with prior experience of more than 5 years on applying similar system. |
| 6 | Taking down eaves gutters and rainwater pipes(any size or pattern), including all fitting, head, shoes ,bend, swan-necks etc., including cleaning or refixing or removal to store complete all as specified and directed. |
| 7 | S&F PVC(SWR) pipes 110mm bore, single socketed , in any length with rubber ring joints, in any length fixed to walls complete all as specified and directed. |
| 8 | S&F PVC(SWR) pipes 75mm bore, single socketed , in any length with rubber ring joints, in any length fixed to walls complete all as specified and directed. |
| 9 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe fixed in repairs complete all as specified and directed. |
| 10 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe fixed in repairs complete all as specified and directed. |
| 11 | M&L for Vitrified ceramic dark shade tiles of 10mm thick and area of each tiles n. exceeding 0.36 Sqm for flooring over 15 mm thick screed bed in CM 1:6, including dismantling of existing tiles all as specified and directed. |
| 12 | M&L for Vitrified ceramic dark shade tiles of 10mm thick and area of each tiles n. exceeding 0.36 Sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting including taking down old plaster surfaces finished all as specified and directed. |
| 13 | M&L for glazed ceramic colour tiles, size 450x350x7mm size as in walls, set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting/dado etc including dismantling complete all as specified & as directed. |
| 14 | M&L for Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) including dismantling of existing tiles complete all as directed and specified. |
| 15 | S&F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of fully perforated 12mm thick micro tegular edge or 10mm thick square edge of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0 .50 to 0.75 as per IS 8225 :1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws incl dismantling of exiting ceiling board. The work shall be carried out as per specifications, drawing as per directions of the Engineer-in-Charge. |
| 16 | S&F for Gypsum Board 10-12 mm thick in ceiling with anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling including hangers 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slabs/ roof truss by means of ceiling cleats made out of GI flats 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia and 40 mm long including dismantling of existing ceiling board complete all as specified. |
| 17 | M&L Precast cement concrete block masonry with solid blocks in Type C1, 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar complete set in cement mortar 1:6 incl demolition of existing block work complete all as specified and as directed. |
| 18 | Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed. |
| 19 | M&L for 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls on complete all as specified and directed. |
| 20 | M&L for 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall mixed with water proofing compound as per manufacturer's instructions, all as specified and directed. Note:- supply only of water proofing compound will be measured and paid separately under relevant item |
| 21 | M&L for 5mm thick cement plaster in CM 1:3 on concrete surface of ceiling, chajja etc finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 22 | Supply only approved integral water proofing compound complete all as specified and directed. Make : conplast x 421 IC of M/s Foroc Chemical (India) Ltd or its equivalent of make Dr Fixit/ STP Ltd. |
| 23 | M&L for Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat over a coat of wall putty 1 to 2mm thick on new surface of wall as recommended by manufacturer of interior emulsion complete all as specified and directed. |
| 24 | M&L for Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat including preparation of new surface of wall recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed. |
| 25 | M&L for Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat over a coat of wall putty 1 to 2mm thick include complete removal of existing surface of wall as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed. |
| 26 | M&L for Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat including complete removal of existing surfaces as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed. |
| 27 | M&L for preparation of plastered surfaces of ceiling and applying three coats of white wash on new surfaces complete all as specified and directed. |
| 28 | M&L for preparation of old decorated ceiling surface and applying two coat of white wash complete all as specified and directed. |
| 29 | Taking down Chowkats or frames n exceeding 1.5 Sq. m each (Without taking off shutters from the frame) of any description complete all as specified. |
| 30 | Taking down door chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified. |
| 31 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 32 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 33 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing edges will be painted to match with prelam sheet complete all as specified and directed. |
| 34 | M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete all as specified and directed. |
| 35 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 36 | S&F 300 mm long aluminium anodised sliding door bolt with hasp, staple cast type complete all as specified and as directed. |
| 37 | S&F extruded aluminium alloy handles fabricated type 150 mm size, anodized complete all as specified and as directed. |
| 38 | S&F Aluminium anodized barrel tower bolt of extruded section 150 mm length complete all as specified and as directed. |
| 39 | S&F powder coated aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50 micron complete all as specified and directed. |
| 40 | S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 41 | S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats and locking arrangement , glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified. |
| 42 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all complete as per requirement and direction. |
| 43 | S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty, glazing clips and beadings in squares/ rectangular in shape n.exc 0.5sq.m in each pane etc. complete all as specified and directed. |
| 44 | S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty, glazing clips and beadings in squares/ rectangular in shape exc 0.5sq.m in each pane etc. complete all as specified and directed. |
| 45 | S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white incl seat cover, P trap 110 mm and fixing bolt etc (excluding flushing cistern and flush pipe) complete all as specified. |
| 46 | S&F in repairs Wash basins, Vitreous China (flat back or angle back type) of size 630 x 450mm, including brackets, waste fittings etc complete all as specified and as directed. |
| 47 | S&F in repairs Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, waste pipe grating and union for discharge pipe, complete all as specified and directed. |
| 48 | S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed. |
| 49 | S&F GI tubing 15 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors incl taking down existing complete all as specified and directed. |
| 50 | S&F GI tubing 20 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors incl taking down existing complete all as specified and directed. |
| 51 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed watertubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 52 | S&F in repair gun metal globe or gate valve 20 mm bore with iron wheel head screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 53 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 54 | S&F in repair CP Brass centre hole basin Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed. |
| 55 | S&F in repairs 15mm dia CP bib taps with wall flange (Fancy type), cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete with check nut , 15mm bore complete all as specified and directed. |
| 56 | S&F in repairs 15mm dia Angle cock with wall flange (Fancy type), cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete with check nut complete all as specified and directed. |
| 57 | S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed. |
| 58 | S&F of 32/40mm waste pipe for wash hand basin and sink complete all as specified and directed. |
| 59 | S&F in repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as directed and specified. |
| 60 | S&F in repair Stainless steel Soap dish fixed to wall complete all as specified and directed. |
| 61 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long glass shelf of size 12 cm wide x 60cm long for wash hand basin all as specified. |
| 62 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 63 | S&F in repair Toilet paper holder with flat recessed type stainless steel chromium plated Complete all as specified and directed. |
| 64 | S&F in repair PVC floor trap 75mm dia, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 65 | S&F in repair 110 mm dia PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old pipes complete all as directed and specified. |
| 66 | S&F in repair PVC (SWR) bends 110 mm dia in any radius with access door etc complete all as directed and specified. |
| 67 | S&F in repair PVC(SWR) pipes 75 mm single socketed with in any length with rubber ring joints, laid in trenches or in floors including taking down old pipes complete all as directed and specified. |
| 68 | S&F in repair PVC (SWR) bends 75 mm dia in any radius with access door etc. complete all as directed and specified. |
| 69 | S&F in repair PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc. complete all as specified. |
| 70 | S&F in repair CP grating size 100mm fixed with white cement complete all as directed and specified. |
| 71 | S&F rotational moulded polyethylene water storage tank three layer 1000 ltr capacity including threaded type cover hoisted and fixed in position all as specified in SSR Pt - I including dismantling and taking down old unserviceable tank all as specified and directed. |
| 72 | S&F rotational moulded polyethylene water storage tank three layer 500 ltr capacity including threaded type cover hoisted and fixed in position all as specified in SSR Pt - I including dismantling and taking down old unserviceable tank all as specified and directed. |
| 73 | S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass complete all as directed and specified. |
| 74 | S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank (Minimum weight 20mm- 45gms ) complete all as directed and specified. |
| 75 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 76 | M&L for reinforced cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in shelves etc incl necessary form work complete all as specified and as directed. |
| 77 | M&L for TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking spirally for hooking ends and binding with and including MS wire annealed n.less than 0.9mm dia complete all as directed and specified. |
| 78 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 79 | S&F for MS framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders, framed balusters; walk ways; railings; framework of water tanks, roof post, purlin and similar work con forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 80 | M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations and filling complete all as specified and directed. |
| 81 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 82 | S&F in repairs Venetian Blinds of selected quality & colour with all arrangements such as Hanging horizontal square bar, PVC vertical flops of 10 cm width for window opening with pull and reverse pull, etc complete all as specified and directed. |
| 83 | M&L Preparing new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coat of Synthetic enamel Paint over one coat of primer to steel surface complete all as specified and directed. |
| 84 | M&L Preparing old steel surfaces of any description over 10cm in width or girth, not otherwise described and applying one coat of Synthetic enamel Paint to steel surface complete all as specified and directed. |
| 85 | S&F inrepairs pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling complete all as specified and directed. |
| 86 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 87 | M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillar, window cill, cooking platforms and including 20mm thick screed bed in cement mortar (1:4) incl pointing in white cement ( tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone (i) using marble dust with admixture of pigment to match incl rounding and polishing to edges of granite slab complete all as specified and directed. |
| 88 | S&F Bird proofing netting made of Anti bird net UV black in colour, made of material Polyolefin all weather proof co-polymer of machine knotting using CNC machines with DSLS technology for anti slip knotting, heat setting should be steam set for greater dimensional stability and knot firmness, and diameter of the twine is 1mm and the size of mesh 25x25mm (+-2mm) of square mesh and should achieve twine breaking strength of 16kgf min, MBS (Mesh breaking strength) 12 Kgf and KBS (Knot breaking strength) 22 Kgf min fixed all as per manufacturers instructions complete all as specified and as directed. |
| 89 | S&F for Polypropylene plastic bird Spike of 305 mm length, Height 95 mm, width 120 mm, install and be fixed to the top or edge of fence or climb mesh with cable ties, adhesive, nails, or screws, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 90 | S&F for Polypropylene plastic bird Spike of 305 mm length, Height 95 mm, width 120 mm, install and be fixed to the top or edge of fence or climb mesh with cable ties, adhesive, nails, or screws, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender