Tender For Welcome Maintenance To Certain Md Accn For Zone A Under Age B/R-Ii And Age E&M At Ge Jhansi
Tender Value
50 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
6 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance To Certain Md Accn For Zone A Under Age B/R-Ii And Age E&M At Ge Jhansi
BOQ
| Sl. No. | Item Description |
| 1 | Material & Labour for preparing old decorated surfaces plastered or unplastered of wall ( if required filling putty in holes on wall surface) and applying one coat of oil bound distemper white or any tinted complete all as specified and directed. |
| 2 | Material & Labour for washing, rubbing down and stopping of distempered and painted surfaces and preparation of old existing surface of wall applying two coat of oil bound distemper of white or any tinted on old walls complete all as specified and directed. |
| 3 | Material & Labour for preparing old decorated surfaces plastered or unplastered of ceiling (if required filling putty in holes on wall surface) and applying one coat of oil bound distemper white or any tinted complete all as specified and directed. |
| 4 | Material & Labour for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitening primer, over a layer of (JK/Birla) 3.0 mm thick wall care putty to get smooth and level finish, complete all as specified and directed. |
| 5 | Material & Labour for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed. |
| 6 | Material & Labour for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 7 | Material & Labour for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand paper rubbing and finally washing with watering and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed. |
| 8 | Demolition of cement concrete including terrazzo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed. |
| 9 | Material & Labour for 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed by Engineer-in-Charge. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 11 | Material & Labour for Non skid ceramic coloured tiles , 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 12 | Material & Labour for ceramic colour tiles in vertical surface of size 350 X 250 x 7/450x300x7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed. |
| 13 | Material & Labour for joint free, Vitrified Ceramic tiles of light shed 8-10 mm thick (square/rectangular) polished , area of each tile not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 14 | Material & Labour for joint free, Vitrified Ceramic tiles of light shed 8-10 mm thick (square/rectangular) polished, same as floor tile but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4, complete all as specified and as directed. |
| 15 | Dismantling stone slabs and tiles of any description or thickness laid , bedded and pointed in any mortar as in floors, aprons etc. complete all as specified and directed. |
| 16 | Material & Labour 20 mm thick granite slab of any type , tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), including pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed. |
| 17 | Supply & Fix 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work including dismantling of old board in any position any description , complete all as specified and directed. |
| 18 | Supply & Fix continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed |
| 19 | Supply & Fix drawer handles, projection drop (50mm to 65mm) on screwed platey complete all as specified and directed |
| 20 | Supply & Fix stainless steel magnetic catcher fancy type for kitchen cabinet / drawer complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply and fix in repair chromium plated stainless steel wire basket (storage basket/cup and saucer basket/plate basket/cutlery basket/bottle pull out) pull out type for modular kitchen of grade 304 including auto close hinge, telescopic type ball runner, decorative type handle etc. necessary fixing clips/screw complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material & Labour for brick work with old size fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar or lime mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 23 | Material & Labour for 10 mm rendering thick in CM (1:6) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed. |
| 24 | Material & Labour for preparation of new plastered of wall surface and applying two coats of oil bound distemper, over a coat of chalk whitening primer over and including a layer 3mm thick of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 25 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exceeding 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exceeding half brick but not exceeding one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. |
| 26 | Taking down chowkhats with shutters (without taking off shutters from the frame) area not exceeding 1.5 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exceeding half brick but not exceeding one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. |
| 27 | Taking down shutters of any description not exceeding 01 Sqm each, complete all as specified and directed. |
| 28 | Taking down shutters of any description exceeding 01 Sqm and not exceeding 02 Sqm each, complete all as specified and directed. |
| 29 | Supply & Fix rolled mild steel in Fe 410-W (Grade-E- 250) quality-A as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 30 | Material & Labour for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed |
| 31 | Supply & Fix 30 mm thick factory made modular type designer moulded flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with prelaminated decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 32 | Material & Labour 30mm thick factory made solid WPC (Wood plastic composite) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zinc coated screws can be remove or fie again of the shall be as per manufacture instruction complete all as specified and complete all as specified and complete all as specified and directed. |
| 33 | Supply & Fix 125 mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed. |
| 34 | Supply & Fix 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed. |
| 35 | Supply & Fix 150 mm long mild steel pressed handles, oval type, stove enamelled black and fixed with screws, complete all as specified and directed. |
| 36 | Supply & Fix aluminium alloy anodized sliding door bolt 300mm (aldrop bolt) length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all specified and directed |
| 37 | Supply & Fix mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed |
| 38 | Supply & Fix 140 mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 39 | Supply & Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 40 | Supply & Fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 41 | Supply & Fix 100 mm size butt hinges, extruded aluminium alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed |
| 42 | Supply & Fix 150mm long barrel tower bolt aluminium anodized extruded section fixed with cadmium plated screws complete all as specified and directed. |
| 43 | Supply & Fix 150mm aluminium handle cast type anodized complete all specified and directed. |
| 44 | Supply & Fix powder coated (minimum thickness of powder coating not less than 50 micron) aluminium window shutter (three shutter) sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55Kg/M of three channel including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter including 5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc; as specified etc complete all as specified and directed. |
| 45 | Supply & Fix powder coated ( minimum thickness of powder coating not less than 50 micron) aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc, complete all as directed. |
| 46 | Supply & Fix 3 mm thick sheet figured glass pin headed type, not exceeding 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 47 | Supply & Fix 3 mm thick sheet glass ordinary quality and glazing type, not exceeding 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 48 | Supply & Fix in replacement of stainless steel wire cloth 0.56 mm in nominal dia of wire average width of aperture 1.18 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed. |
| 49 | Supply & Fix in repair stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and including decorative type fancy SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed. |
| 50 | Supply & Fix ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and including rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 51 | Supply & Fix PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 52 | Supply & Fix Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and including rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 53 | Supply & Fix PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 54 | Supply & Fix 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 55 | Supply & Fix 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 56 | Supply & Fix PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed. |
| 57 | Supply & Fix in repair SS grating of square/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and including fixing with CM to floor/nahani traps etc, complete all specified and directed. |
| 58 | Supply & Fix 15 mm bore Galvanized Steel tubes, medium grade fixed to walls and ceilings or laid in floors, concealed or open including cutting of grooves including taking up or down with connections and fittings all as specified and directed |
| 59 | Material & Labour for cutting chases, pinning in for concealed water tubing, not exceeding 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed. |
| 60 | Supply & Fix 20 mm bore Galvanized Steel tubes, medium grade fixed to walls and ceilings or laid in floors, concealed or open including cutting of grooves including taking up or down with connections and fittings all as specified and directed |
| 61 | Supply & Fix rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered, white colour, 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and including disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of buildings, complete all as specified and directed. |
| 62 | Supply & Fix 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 63 | Supply & Fix 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 20 mm-210 gms) etc, complete all as directed. |
| 64 | Supply & Fix in repair 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 20 mm-210 gms) etc, complete all as specified and directed. |
| 65 | Supply & Fix in replacement of stainless steel sink, 1.00 mm thick for kitchen with plug, with and including 40mm dia CP waste coupling, waste pipe of 750mm long, washers, cantilever brackets, connecting union etc overall approx size 495 mm x 420 mm with approx bowl size of 410 mm x 330 mm x 160 mm etc, complete all as specified and directed. |
| 66 | Supply & Fix sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 67 | Supply & Fix in replacement of stainless steel kitchen plate rack made out of 1 mm thick sheet of size 765x920mm and 220mm deep, weight not less than 7 Kg, complete all as specified and as directed. |
| 68 | Supply & Fix in repair 600x450mm size and 4mm thick bevelled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and including fixing accessories, complete all as specified and directed. |
| 69 | Supply & Fix in replacement of 15 mm CP Brass 3-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upper side, connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all specified and directed. |
| 70 | Supply & Fix 15 mm bore Brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as directed. |
| 71 | Supply & Fix in replacement of stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as specified and directed. |
| 72 | Supply & Fix in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and including swivel type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all specified and directed. |
| 73 | Supply & Fix in replacement of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all specified and directed. |
| 74 | Supply & Fix in repair Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified with wall flange made of cast copper alloy, complete all specified and directed. |
| 75 | Supply & Fix in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all specified and directed. |
| 76 | Supply & Fix in replacement of toilet paper holder with flap made of cast copper alloy, chromium plated, complete all specified and directed. |
| 77 | Supply & Fix in replacement of towel rail 600 mm long D type between flange and wall bracket made of cast copper alloy, chromium plated, complete all specified and directed. |
| 78 | Supply & Fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as directed. |
| 79 | Supply & Fix in replacement of Corner glass shelf 300 mm with Chromium plated bracket guard and railing and fixing accessories, complete all as directed. |
| 80 | Supply & Fix in replacement of PVC multipurpose cabinet mirror with front openable door of overall size 350 x 450 mm, complete all as specified and directed. |
| 81 | Supply & Fix in replacement of 1st quality vitreous china ware European type WC with \\"P\\" or \\"S\\" type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as directed. |
| 82 | Supply & Fix in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor, complete all specified and directed. |
| 83 | Supply & Fix in replacement of plastic seat with covers for water closet, of existing colour, closed pattern with flat bottom with chromium plated hinging device, complete all as directed. |
| 84 | Supply & Fix in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe, P Trap and connecting cone but excluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed. |
| 85 | Supply & Fix in replacement of 1st quality vitreous china wash hand basin, white flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size, complete all as specified and directed. |
| 86 | Supply & Fix in replacement of PVC waste pipe 32 mm dia 750 mm long with for wash hand basin or for kitchen sink, complete all as specified and directed. |
| 87 | Supply & Fix in replacement of PVC connection 450 x 15mm dia PTMT (PVC), complete all as directed. |
| 88 | Supply & Fix in replacement of PVC connection 600 x 15mm dia PTMT (PVC), complete all as directed. |
| 89 | Supply & Fix in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all specified and directed. |
| 90 | Supply & Fix in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, complete all specified and directed. |
| 91 | Taking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, regulators, sockets, bell push and call bell wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. |
| 92 | Material & Labour for point wiring for One light / ceiling fan / exhaust fan / call bell point controlled by one switch, wiring shall consist of 1.5 Sqmm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single core copper conductor cable conforming to IS:694, along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing, drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed. |
| 93 | Material & Labour for point wiring for One 6A socket point controlled by one switch on independent board, wiring shall consist of 1.5 Sqmm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single core copper conductor cable conforming to IS:694, along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing, drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of separate pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, etc. complete all as specified and directed. |
| 94 | Material & Labour for point wiring for One 6A socket point controlled by one switch on same board, wiring shall consist of 1.5 Sqmm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single core copper conductor cable conforming to IS:694, along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing, drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc. Rate shall be inclusive of loop wiring inside the existing master pressed steel terminal box of thickness not less than 18 SWG sharing the same 3 mm thick phenolic laminated hylam sheet cover, including all hardware and its all accessories complete all as specified and directed. |
| 95 | Material & Labour for point wiring for One 16A socket point controlled by one 16A switch on independent board, wiring shall consist of 2.5 Sqmm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single core copper conductor cable conforming to IS:694, along with one run of 2.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing, drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of separate pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, etc. complete all as specified and directed. |
| 96 | Material & Labour for point wiring for One 16A socket point controlled by one 16A switch on independent board, wiring shall consist of 4 Sqmm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single core copper conductor cable conforming to IS:694, along with one run of 4 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing, drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of separate pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, etc. complete all as specified and directed. |
| 97 | Material & Labour for point wiring for One 16A socket point controlled by one 16A switch on independent board but just below / above the existing socket points / DBs up to one meter distance in the same vertical plane. Wiring shall consist of 2.5 Sqmm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single core copper conductor cable conforming to IS:694, along with one run of 2.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing, drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of separate pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, etc. complete all as specified and directed. |
| 98 | Material & Labour for point wiring for One light / ceiling fan / exhaust fan / call bell point controlled by one modular switch position, wiring shall consist of 1.5 sq. mm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single-core copper conductor cable conforming to IS:694, along with one run of 1.5 sq. mm green FRLSH insulated copper conductor cable for continuous earthing, drawn through and including medium-grade rigid PVC conduit (minimum 20mm OD) conforming to IS:9537 (Pt-III) concealed in walls or floors. Rate shall be inclusive of modular GI/metal box embedded in the wall, modular grid frames with matching cover plates, all conduit accessories, deep junction boxes, inspection covers, common earth loop connections to the earth dolly, wall chasing, plaster patching, and hardware consumables complete all as specified and directed by the Engineer-in-Charge. |
| 99 | Material & Labour for point wiring for One 6A socket point controlled by one modular switch on independent board , wiring shall consist of 1.5 sq. mm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single-core copper conductor cable conforming to IS:694, along with one run of 1.5 sq. mm green FRLSH insulated copper conductor cable for continuous earthing, drawn through and including medium-grade rigid PVC conduit (minimum 20mm OD) conforming to IS:9537 (Pt-III) concealed in walls or floors. Rate shall be inclusive of modular GI/metal box embedded in the wall, modular grid frames with matching cover plates, all conduit accessories, deep junction boxes, inspection covers, common earth loop connections to the earth dolly, wall chasing, plaster patching, and hardware consumables complete all as specified and directed by the Engineer-in-Charge. |
| 100 | Material & Labour for point wiring for One 6A socket point controlled by one modular switch on same board , wiring shall consist of 1.5 sq. mm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single-core copper conductor cable conforming to IS:694, along with one run of 1.5 sq. mm green FRLSH insulated copper conductor cable for continuous earthing, drawn through and including medium-grade rigid PVC conduit (minimum 20mm OD) conforming to IS:9537 (Pt-III) concealed in walls or floors. Rate shall be inclusive of modular GI/metal box embedded in the wall, modular grid frames with matching cover plates, all conduit accessories, deep junction boxes, inspection covers, common earth loop connections to the earth dolly, wall chasing, plaster patching, and hardware consumables complete all as specified and directed by the Engineer-in-Charge. |
| 101 | Material & Labour for point wiring for One 16A socket point controlled by one 16A modular switch on independent board, Wiring shall consist of 2.5 Sqmm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single-core copper conductor cable conforming to IS:694, along with one run of 2.5 sq. mm green FRLSH insulated copper conductor cable for continuous earthing, drawn through and including medium-grade rigid PVC conduit (minimum 20mm OD) conforming to IS:9537 (Pt-III) concealed in walls or floors. Rate shall be inclusive of modular GI/metal box embedded in the wall, modular grid frames with matching cover plates, all conduit accessories, deep junction boxes, inspection covers, common earth loop connections to the earth dolly, wall chasing, plaster patching, and hardware consumables complete all as specified and directed by the Engineer-in-Charge. |
| 102 | Material & Labour for point wiring for One 16A socket point controlled by one 16A modular switch on independent board, Wiring shall consist of 4 Sqmm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single-core copper conductor cable conforming to IS:694, along with one run of 4 sq. mm green FRLSH insulated copper conductor cable for continuous earthing, drawn through and including medium-grade rigid PVC conduit (minimum 20mm OD) conforming to IS:9537 (Pt-III) concealed in walls or floors. Rate shall be inclusive of modular GI/metal box embedded in the wall, modular grid frames with matching cover plates, all conduit accessories, deep junction boxes, inspection covers, common earth loop connections to the earth dolly, wall chasing, plaster patching, and hardware consumables complete all as specified and directed by the Engineer-in-Charge. |
| 103 | Material & Labour for point wiring for One 16A socket point controlled by one 16A modular switch on independent board but just below / above the existing socket points / DBs up to one meter distance in the same vertical plane , Wiring shall consist of 2.5 Sqmm 1100 Volts grade FRLSH insulated, unsheathed, multistranded single-core copper conductor cable conforming to IS:694, along with one run of 2.5 sq. mm green FRLSH insulated copper conductor cable for continuous earthing, drawn through and including medium-grade rigid PVC conduit (minimum 20mm OD) conforming to IS:9537 (Pt-III) concealed in walls or floors. Rate shall be inclusive of modular GI/metal box embedded in the wall, modular grid frames with matching cover plates, all conduit accessories, deep junction boxes, inspection covers, common earth loop connections to the earth dolly, wall chasing, plaster patching, and hardware consumables complete all as specified and directed by the Engineer-in-Charge. |
| 104 | Taking down submain wiring of any size any type and in any position metallic/non metallic PVC conduit of wooden batten complete all as specified and directed. Please Enable Macros to View BoQ information |
| 105 | Taking down submain wiring of any size any type and in any position metallic/non metallic PVC conduit of wooden batten complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender