Tender For Renovation Of Male And Female Toilets Opposite Lecture Theatres At Dr. Harvansh Singh Judge Institute Of Dental Sciences & Hospital, P.U. South C Us, Sector-25, Chandigarh.
Tender Value
14.49 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
0 days left
EMD
29000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Male And Female Toilets Opposite Lecture Theatres At Dr. Harvansh Singh Judge Institute Of Dental Sciences & Hospital, P.U. South C Us, Sector-25, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | 12 mm cement plaster of mix : |
| 2 | 1:6 (1 cement: 6 fine sand) (Ref:-13.1.2) |
| 3 | Painting with synthetic enamal paint of approved brand and manufacture of required colour to give an even shade: |
| 4 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.(Ref:-13.62.1) |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking with in 50 metres lead: |
| 6 | Of area 3sqm metres lead:(Ref:-15.12.1) |
| 7 | Dismantling stone slab flooring laid in cement mortar including stacking of servicable material and disposal of unserviceable material with in 50 metre lead.(Ref:-15.25) |
| 8 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: |
| 9 | Thickness up to 40 mm (Ref:-15.40.1) |
| 10 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.(Ref:-15.56) |
| 11 | Providing And Fixing white vitreous chinaware pedestal type water closet (European type W.C.pan ) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device ( handle lever), conforming to IS: 7231, with all fittings and fixtures complete including cuting and making good the walls and floors wherever required: |
| 12 | W.C. pan with ISI marked white solid plastic seat and lid (Ref:-17.2.1) |
| 13 | Providing and fixing PVC waste pipe |
| 14 | Semi rigid pipe |
| 15 | 32mm dia (Ref:-17.28.1.1) |
| 16 | Providing and fixing soil, waste and vent pipes |
| 17 | 100 mm dia. |
| 18 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989.(Ref:-17.35.1.2) |
| 19 | Providing and fixing soil, waste and vent pipes |
| 20 | 75 mm dia. |
| 21 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989.(Ref:-17.35.2.2) |
| 22 | Providing and fixing collar: |
| 23 | 100 mm |
| 24 | Sand cast iron S&S as per IS - 3989 (Ref:-17.57.1.1) |
| 25 | Providing and fixing collar: |
| 26 | 75 mm |
| 27 | Sand cast iron S&S as per IS - 3989 (Ref:-17.57.2.2) |
| 28 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: |
| 29 | 100 mm (Ref:-17.58.1) |
| 30 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: |
| 31 | 75 mm (Ref:-17.58.2) |
| 32 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 33 | 100 mm inlet and 75 mm outlet |
| 34 | Sand cast iron S& S as per IS-3989 (Ref:-17.60.1.1) |
| 35 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 36 | 15 mm dia nominal bore (Ref:-18.11.1) |
| 37 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 38 | 20 mm dia nominal bore (Ref:-18.11.2) |
| 39 | Providing and fixing unplasticised PVC connection pipe with brass C.P. Nuts collar and bush of approved quality colour. |
| 40 | 45cm length |
| 41 | 15 mm nominal bore (Ref:-18.21.2.1) |
| 42 | Providing and fixing G.I. Union in existing G.I. pipe line,cutting and threading the pipe and making long screws inclding excavation, refilling the earth or cutting of wall and making good the same complete wherever required: |
| 43 | 15 mm nominal bore. (Ref:-18.47.1) |
| 44 | Providing and fixing G.I. Union in existing G.I. pipe line,cutting and threading the pipe and making long screws inclding excavation, refilling the earth or cutting of wall and making good the same complete wherever required: |
| 45 | 20 mm nominal bore.(Ref:-18.47.2) |
| 46 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 47 | With F.P.S. bricks (Ref:-18.76.1) |
| 48 | Providing and fixing aluminium work for doors, windows , ventilators and partions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and sce=rews or with fixing clips , or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with requried PVC/ neoprene felt etc. Aluminium snap b;eading for glazing / panelling C.P. brass / stainless steel screws , all complete as per architctural drawings and the direcstsions of Engineer-in -charge. (Glazing and panelling to be paid for separtely): |
| 49 | For fixed portion |
| 50 | Powder coated aluminium (minimum thickness of powder coating 50 micron) 10 Gauge (Ref:-21.1.1.2) |
| 51 | Providing and fixing aluminium work for doors, windows , ventilators and partions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and sce=rews or with fixing clips , or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with requried PVC/ neoprene felt etc. Aluminium snap b;eading for glazing / panelling C.P. brass / stainless steel screws , all complete as per architctural drawings and the direcstsions of Engineer-in -charge. (Glazing and panelling to be paid for separtely): |
| 52 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 53 | Powder coated aluminium (minimum thickness of powder coating 50 micron) 10 guage (Ref:21.1.2.2) |
| 54 | Providing and fixing 1st quality ceramic glazed wall tiles (300x600mm) conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Ref:N.S) |
| 55 | Providing and laying Anti skid floor tiles of size 300x300mm of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete (Ref:N.S) |
| 56 | Providing and fixing CP grating/Jali with lock for traps. Complete in all respect to the entire satisfaction to the Engineer-in-charge. (Ref:N.S) |
| 57 | Providing and fixing 15mm C.P. brass Angle cock and SS flange of approved quality. complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:N.S) |
| 58 | 15 mm nominal bore (Ref:N.S) |
| 59 | Providing & fixing 32mm dia CP brass Bottle trap round shape (Cylindrical or as per requirement) with wall flange. Complete in all respects as per entire satisfaction of the Engineer-in-Charge. (Ref:N.S) |
| 60 | 32 mm nominal bore (Ref:N.S) |
| 61 | Providing and fixing 5mm thick mirror to be fixed with 4mm thk. hard board & 8mm thk. Ply at back of hard board & all round to be finished with PVC/wood designer 2\\"x1 1/2\\" moulding. Complete in all respects as per entire satisfaction of the Engineer-in-Charge. (Ref:N.S) |
| 62 | Wash room and toilets counter (Ref:N.S) |
| 63 | Providing and fixing white vitreous china flat black half stall urnial of approved size including painting of fittings and cutting and making good the walls and floors wherever required (Ref:N.S) |
| 64 | Providing and fixing in position 15mm dia CP Brass nipple(1\\" to 2\\" long) to various fittings. Complete in all respect to the entire satisfaction of the engineer-in-charge. |
| 65 | Providing and fixing Single socketed on wall face unplasticised Rigid UPVC pipe (6 kg per Sqcm pressure) of size 100mm dia conforming to IS : 13592 Type A, including jointing with necessary Tee and Bend conforming to IS : 5382, leaving 10 mm gap for thermal expansion. complete as per entire satisfaction of the Engineer-in-Charge. (Ref:N.S) |
| 66 | 100mm dia |
| 67 | Providing & fixing chinaware urinal partition of standard size with approved screws. Complete in all respects to the entire satisfaction of the engineer-in-charge. (Ref:N.S) |
| 68 | Providing and fixing C.P. towel Ring complete with PVC rawl plug and CP Brass screws with concealed fittings of approved quality and colour.Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:N.S) |
| 69 | Providing and fixing 3mm thick bakelite sheet of approved brand by engineer-in-charge at site. The sheet is to be used in panelling work for aluminium door/winow/shutter and partition fixed in position with C.P. brass screw or EPDM gasket etc. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:N.S) |
| 70 | Providing & fixing Liquid Soap dispenser with metallic bottle. Complete in all respects as per entire satisfaction of the Engineer-in-Charge. (Ref:N.S) |
| 71 | Providing and fixing Jet connection alongwith 450mm long pipe for water closet. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:N.S) |
| 72 | Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked. (Ref:N.S) |
| 73 | Tower bolt 8\\" long |
| 74 | Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked. (Ref:N.S) |
| 75 | Tower bolt 6\\" long |
| 76 | Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked. (Ref:N.S) |
| 77 | Handle 5\\" D-type (Ref:N.S) |
| 78 | Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked. |
| 79 | Hinges 5\\" (Ref:N.S) |
| 80 | Providing and fixing Hydraulic door closer with logo printed along with necessary fittings. Complete in all respect to the entire satisfaction of the engineer in charge. (Ref:N.S) |
| 81 | Providing and fixing in position 15mm dia pillar tap with cap of approved make with necessary fittings. complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:N.S) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender