Tender For Providing And Fixing Ofchildren Play Equipments And Open Air Gym And Gynmanstic In Various Parks Of Modern Housing Complex And Duplex Manimajra,Chandigarh Under Ward Development Fund.
Tender Value
13.82 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
7 days left
EMD
27656
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Ofchildren Play Equipments And Open Air Gym And Gynmanstic In Various Parks Of Modern Housing Complex And Duplex Manimajra,Chandigarh Under Ward Development Fund.
BOQ
| Sl. No. | Item Description |
| 1 | .A.P.S (JUMBO 3X1)Sr. No. Description Quantity1 Standard See Saw 12 Double Swing 13 Wave Slide 5’ ht. 1Area : 4m x 4mSafe Area : 5m x 5m(Jumbo 3 X1) set consist of :Standard See Saw:This item provides a good entertainer for children. The seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 NB GI Pipe. The level is of 15 NB & 25 NB pipes. The bearing used is a heavy-duty bush type.Double SwingIn the double swing the leg support is bending made of 40nnb GI pipes and top pipe is 50nb GI pipes with GI Junction box with powder coating. The swing seat is made up of 10mm thick rubber belt. The belt seat is affixed on 6mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp.Wave Slide:The Wave slide chute shall be made up of 4mm thick of Fiber reinforced plastic with self-pigmented. The Wave shape should be in such manner that it will not give any jerk or bump to the rider. The chute has its end such as it causes safe landing of the child. The landing portion should be in horizontal with respect to the ground. There should be support provided made up of 25 NB GI pipe. |
| 2 | Providing and fixing of Chest Press Double Size / Dimensions Length -1200 milimeterWidth- 700 milimeterHeight – 1800 milimeterMaximum weight -120 kilogramMaterial:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure strength, durability, and corrosion resistance. The main central pipe shall be an 80 mm NB GI pipe, while the handle frame and sheet frame shall each consist of 40 mm NB GI pipes. The connecting links shall be made of 32 mm NB GI pipes, and the footrest pipe shall also be 32 mm NB GI. The mild steel (MS) foundation plate shall have a minimum thickness of 12 mm. The foundation pipe shall consist of a GI pipe anchored 750 mm deep and supported with an MS angle of 25×25×4 mm for stability. The seat and backrest shall be made of metallic sheet 3 mm M.S. of size 1”x1”. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to enhance durability and resistance to corrosion. The movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. The closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (FRP) closing caps having a minimum thickness of 3 mm. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance in outdoor conditions. Paint finish- Power coated, UV resistantPaint coating thickness (min) – 100 micrometerComplete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 3 | Providing and Fixing of Parallel Bars Size/DimensionsLength- 900 millimeterHeight – 800 millimeterMaterial:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure strength and durability. The vertical or standing pipes shall be 40 mm NB with a thickness of 2.9 mm, and the horizontal pipes shall also be 40 mm NB with a thickness of 2.9 mm. The foundation pipe shall consist of a GI pipe anchored 500 mm deep and supported with a mild steel (MS) angle of 25×25×4 mm. The nominal bore of the foundation pipe shall be 40 mm NB with a thickness of 2.9 mm. The MS foundation plate shall have a minimum thickness of 12 mm. All nuts and bolts used for assembly shall be made of stainless steel to provide durability and resistance to corrosion. The open ends of all pipes, bearing bushes, and bases shall be fitted with fiber-reinforced plastic (FRP) caps having a minimum thickness of 2 mm. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance under outdoor conditions.Paint coating thickness (min) – 80 micrometerComplete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 4 | Providing and fixing of Air walker/Stroller Single Size / Dimensions Length -1100 millimeterWidth- 460 millimeterHeight – 1480 millimeterMaximum weight – 100 kg.Material:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure strength, durability, and corrosion resistance. The main frame shall be made of 100 mm NB GI pipe, while the leg movement frame shall consist of 40 mm NB GI pipe, and the handle frame shall be constructed using 32 mm NB GI pipe. The movement mechanism shall be equipped with ball bearings that are self-lubricating and sealed to provide protection against rain, dust, and other environmental factors. The anti skid footrest shall be made of metallic sheet 3 mm M.S. The foundation pipes shall be GI pipes anchored 750 mm supported with mild steel (MS) angles of 25×25×4 mm. The nominal bore of the foundation pipe shall be 100 mm, while the MS foundation plate shall have a minimum thickness of 10 mm. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure long-lasting durability and corrosion resistance. The open ends of all pipes, as well as the bearings, bushes, and bases, shall be fitted with HDPE closing caps having a minimum thickness of 2 mm to provide a neat finish and additional protection. All plastic components shall be UV-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.Paint coating thickness (min) – 100 micrometerComplete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 5 | Providing and fixing of Three wheel shoulder Builder/ Arm wheel Size / Dimensions Height of central Pole from ground -1524 millimeterOutside diameter of first wheel - 850 millimeterOutside diameter of second wheel - 800 millimeterOutside diameter of third wheel - 650 millimeter Height of first wheel from ground - 1220 millimeterHeight of second wheel from ground - 1200 millimeterHeight of third wheel from ground - 1180 millimeterMaximum weight -120 kilogramMaterial:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality and durability. The main central pipe shall be constructed using a 125 mm NB GI pipe, while the ring (wheel) shall be made of a 40 mm NB GI pipe. The spokes of the wheel shall consist of 15 mm NB GI pipes, with a total of six spokes per wheel. The foundation pipes shall be GI pipes anchored 750 mm deep, supported with mild steel (MS) angles of 25×25×4 mm, and shall have a nominal bore of 125 mm. The MS foundation plate shall have a minimum thickness of 12 mm. All nuts and bolts used for assembly shall be made of stainless steel to ensure durability and resistance to corrosion. The movement mechanism shall be equipped with ball bearings, which shall be self-lubricating and sealed to provide protection against rain, dust, and other environmental factors. The open ends of pipes, bearings, bushes, and bases shall be fitted with high-density polyethylene (HDPE) closing caps having a minimum thickness of 2 mm. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance in outdoor conditions.Paint coating thickness (min) – 80 micrometerComplete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 6 | Providing and fixing of Sit Up Board Outdoor Gym Equipment complete in all respects having following specifications.Size / Dimensions Length - 1524 millimetreWidth - 1524 millimetreHeight - 1000 millimetre Weight - 100 kilogram (Maximum)Material - All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality, strength, and durability. The backrest shall be made of perforated sheet GI of thickness 8 mm. The main central pipe shall be made of 80 mm NB GI pipe with a thickness of 3.2 mm. The footrest pipe shall be made of 32 mm NB with 2.6 mm thickness of GI pipe. The backrest frame pipe and connecting links shall be made up of 25 mm NB with 2.6 mm thickness of GI pipe. The leg support pipe shall be made up of 32 mm NB and 2.6 mm thickness of GI pipe. The foundation pipe with anchored 500 mm deep GI pipe supporting with MS angle 25x25x4. The open ends of all pipes, as well as bearings, bushes, and bases, shall be fitted with fibre-reinforced plastic (FRP) closing caps having a minimum thickness of 2 mm to provide a smooth finish and additional protection. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance in outdoor conditions. Bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements.Paint finish- Power coated, UV resistantPaint coating thickness (min) – 80 micrometer Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 7 | Providing and fixing of Double Twister( One standing and One Sitting) Size / Dimensions Length -1400 millimeterWidth- 680 millimeterHeight – 900 millimeter Maximum weight - 100 kilogramMaterial:- All the pipes shall be Galvanized Iron (GI) and ISI marked to ensure quality, strength, and durability. The main central pipe shall be made of 100 mm NB GI pipe with a thickness of 4.5 mm. The standing/sitting twister frame pipe shall be 32 mm NB GI pipe with a thickness of 4 mm, while the rotating disk support pipe at the bottom shall be 80 mm NB GI pipe with a thickness of 3.2 mm. The handle frame pipe shall be 25 mm NB GI pipe with a thickness of 3.2 mm. The foundation pipes shall consist of GI pipes anchored 750 mm deep and supported with mild steel (MS) angles of 25×25×4 mm, having a nominal bore of 100 mm. The MS foundation plate shall have a minimum thickness of 10 mm. The movement mechanism shall be equipped with roller bearings that are self-lubricating and sealed to provide protection against rain, dust, and other environmental elements. All nuts and bolts used for assembly shall be made of galvanized iron (GI) to ensure durability and corrosion resistance. The footrest shall be made of aluminum casting for enhanced strength and stability. The open ends of all pipes, as well as bearings, bushes, and bases, shall be fitted with fiber-reinforced plastic (FRP) closing caps having a minimum thickness of 2 mm to provide a smooth finish and additional protection. All plastic components shall be UV-stabilized and weather-resistant to ensure long-lasting performance in outdoor conditions. Bearings are self-lubricating and sealed to protect against rain, dust, and other environmental elements.Paint finish- Power coated, UV resistantPaint coating thickness (min) – 80 micrometer Complete in all respects, including installation of equipment in a cement concrete block of size 5’ x 5’ x 1¼’, to the entire satisfaction of the Engineer-in-Charge. |
| 8 | Providing and Fixing of Two sided RotatorSize:- Length – 1.7 mWidth – 0.48 mHeight - 1.31 mMain pipe :- 114 mm X3mmConnected Pipe (Round):- 60mmX3mm, 33mmX3mmConnected Pipe (Rectangel):- 60X40X3 mmMaterial: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanizedPaint: All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge.Functions: The Two Sided Rotator features two positions combining the standing and sitting rotators. The Twisting motion stretches the obliques and abdominal muscles and serves to align the spins and lower back. This exercise can be done with up to two people at a time, one in a sealed position, one in a standing position. |
| 9 | Providing and Fixing of Hip TwisterSize:-Length – 1.31 mWidth - 0. 35 mHeight – 2.40 m Main pipe :- 88 mm X3mmConnected Pipe:- 48mmX3mm, 32mmX3mmMaterial: Pre Galvanized Mild SteelPaint: All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge.Functions: The Hip Twister Consists of a swivel stand which rotates as the arms and shoulders are held square in the overhead holds. Standing with the spine straight, rotate slowly to the stretch position, alternating directions. While rotating right, the left internal and external oblique are stretched, and to a lesser extent, the abdominal and extensor muscles. Reversing direction works the same muscles on the other side. This is not a power exercise, so it might take several minutes of easy repetitions to achieve the best results |
| 10 | Providing and Fixing of Integrated Fitness SizeWidth – 2.608 mtrHeight – 2.45 mtrMain pipe :- 88 mm X3mmConnected Pipe:- 48mmX3mm, 32mmX3mm, 25mmX3mmMaterial: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized.Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge.Function – Integrated Fitness Apparatus is designed for to promote fun and fitness. It consists of multiple exercise challenges requiring the practice of balancing, climbing, strength and agility. The equipment requires resilient surfacing material underneath and covering a safety zone around the equipment. Consult the applicable playground safety guidelines. |
| 11 | Providing and Fixing Pull Up Bars/ Horizontal BarsTo perform a pull-up or chin-up, hold onto the bar, use the arms to pull up until the chin is level with or above the bar. Lower again and repeat according to your capability. Pull-ups / Chin-ups can be done with two hand grips, forward or reverse, each strengthening different muscles. The forward bar grip (backs of hands facing you) places more emphasis on the trapezius and muscles of the back, whereas the reverse bar grip (or underhand grip) is narrower and places focus on the biceps. The pull-up bars can also host many more exercises, including shoulder and arm stretching, improving the grip, the hanging leg lift which strengthens the abdominal muscles. Additionally, simply hanging by the arms to stretch the lower back and align the spine is a great benefit to the lower back.Introduce yourself to all exercises gradually, avoiding undue stress. Slowly build the number of repetitions. Most people find chin-ups very difficult, especially those with higher body weight. As necessary, use the ground to help boost upward motion.Size Length – 2.4 mtrPost diameter– 0.115 mtrHeight – 2.4 mtrMain pipe :- 114 mm X3mmConnected Pipe:- 32mmX3mmMaterial: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanizedPaint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge.Function - The Pull Up Bars / Horizontal Bars are a military fitness training favorite ! Chin-ups are one of the best tests of a person's strength to weight ratio -- a primary indicator of upper body strength. |
| 12 | Providing and Fixing of Waist stretcher Size:- Length – 1.60 mtrWidth – 0.50 mtrHeight – 1.15 mtrMain pipe :- 88 mm X3mmConnected Pipe (Round):- 48mmX3mmConnected Pipe (Rectangle):- 60X40X3 mm & 40X20X3 mmMaterial: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanizedPaint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge.FUNCTIONS: The Waist Stretcher provides support while the muscles and tendons of the back and abdominal area are stretched. Lean backwards against the equipment, holding the side bars for support. Carefully increase the backward level of stretch. Relax into the stretched position.Also, lean across the apparatus forwards to gently stretch the lower back and decompress the spine |
| 13 | Providing & fixing of Pommel Horse apparatusThe resistance is controlled by the vertical force provided by the legs. The feet are planted on the ground. The more the feet are underneath the body the more support can be provided.Like the dips, push from a position with the elbows bent to a straight armed position. Focus on the extension of the triceps.The bars can also be used for angled push-ups and for abdominal exercises where the legs and feet are lifted from the ground to form an \\"L\\" position.Size:- Length – 2.16 mtrWidth – 0.75 mtrHeight – 1.00 mtrMain pipe :- 88 mm X3mmConnected Pipe (Round):- 48mmX3mm, 32mmX3mmConnected Pipe (Rectangle):- 60X40X3 mmMaterial: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanizedPaint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge.FUNCTIONS: The Pommel Horse apparatus features three exercise positions with bars which allow assisted dips to be performed. Dips on the Parallel Bars are very difficult for most people, so this apparatus is designed to preserve the value of the important triceps and shoulder exercise for those who need less resistance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender