Water Resources and Irrigation Government Departments Closing in 6 days TDR #56897596

Tender For Restoration And Rain Damages To Water Supply Scheme Pinni In Gp Pinni In Tehsil Bhuntar Distt Kullu (Sh:- Providing, Fabrication, Installation And Errection Of Steel Zinc Aluminium Storage Tank Of 30,000 Ltr Capacity At Pinni) Under Pdna E

Issued by Government Departments · Kullu, Himachal Pradesh
Tender Value
7.10 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
6 days left
EMD
14500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Restoration And Rain Damages To Water Supply Scheme Pinni In Gp Pinni In Tehsil Bhuntar Distt Kullu (Sh:- Providing, Fabrication, Installation And Errection Of Steel Zinc Aluminium Storage Tank Of 30,000 Ltr Capacity At Pinni) Under Pdna Estimated Cost= 7,10,129 Earnest Money=14,500 Time= 2 Months

BOQ

Name of Work:- Restoration and rain damages to WSS Pinni in GP Pinni in Tehsil Bhuntar Distt Kullu (SH:- Providing, fabrication, installation and errection of Steel Zinc Aluminium storage tank of 30,000 ltr capacity at Pinni) Under PDNA Estimated Cost= 7,10,129 Earnest Money=14,500 Time= 2 Months
Sl. No. Item Description
1Cutting in earth work in all kinds of soil in all leads and lifts such a spade work , pick work , jumper work Saturated/Unsaturated soil blasting work in soft/ hard rock chiseling/wedging out rock where blasting is prohibited in all leads and lifts stacking the useful material available from cutting work and handing over the useful material to the department free of cost as per direction of the Engineer in charge with in all leads and lifts.
2Excavation in foundations, trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling in hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of each deposited layer by ramming and watering and then disposing of all surplus excavated earth foundations etc., consolidating as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost as per direction of Engineer-in-charge with in all leads and lifts.
3Providing and laying cement concrete 1:4:8( 1cement:4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth.
4Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in :
5Foundations, footings, bases of columns and the like and mass concrete.
6Providing & laying tor steel reinforcement for RCC work including straightening, cutting, bending, placing in position & binding all complete upto or above plinth level of mild steel & medium tensile steel bars all complete as specified & directed by the Engineer-in-charge.
7Centring & shuttering including strutting, propping etc. & removal of form for foundations, footings, bases of columns etc. for mass concrete complete in all respect within all leads & lifts as per the direction & to the entire satisfaction of the engineer-in-charge.
8Supplying and filling in plinth with sand under floors, including watering, ramming,consolidating and dressing complete.
9Providing and fixing double flanged Cast steel sluice valve Class-I IS: 780-1984 of Kirloskar/Leader/Pelican make 40 mm dia for the pipe line capable to withstanding normal seat pressure including cutting, welding, providing and fixing rubber/asbestos sheet of maximum thickness 3mm as per IS: 2712-1979 and providing and fixing MS nuts and bolts in required number including carriage of material in all leads and lifts.
10Providing, supplying and fixing of ISI marked GI union IS 1879:2010 (third revision ) with in all leads and lifts as per the entire satisfaction of Engineer in charge.
11Providing and fixing Zinc Aluminium Steel Drinking Water Storage tank rising conical proof with HDG roof trusses and Lockable Access hatch including all fittings including 1 No. higher heavy duty cage Ladder GI 1 No Nylon rope and aluminium step access ladder hatch on roof outlet and over flow nozzles level indicator of material of provide by STAC and warranty of 10 Years including fixing of three laps under the roof 65 mm Dia inlet over flow and scour pipe and 65 mm dia and outlet welding all accessories with sluice valve in each point including all leads and lift with entire satisfaction of engineer in charge. Zn-Al Tank Capacity:- 30,000 ltr Dia - 3.60 mtr Height:- 3.03 mtrROOF SPECIFICATION:-Roof Type: Self Supported Dome Type Bulk Density Kg/Cum.: 1000Kq/m^3 Sesmic Zone :- Zone IV Roof Angle: 8 Degree 30 Wind Speed:- 180km / Hr Roof Structure: Hot Dipped GalvanizedTECHNICAL SPECIFICATIONS OF SHEETWall Sheet Yield Strength: 300MPA Wall Sheet Tensile Strength :- 340 MPA Elongation:- 18% Sheet Corrugation Space :- 75mm Depth:- 18mm Thickness: 0.8mm Each Corrugated Sheet Make of Sheet:- TATA Bluescope Sheet Galvanize Coating: Zinc Alume ZA 150 MOC of Sheet :- ZincalumeTECHNICAL SPECIFICATION OF LINERWeight/ Sqm. (CSM): 760 gsm Anti-Algae Stabilized: Yes Both Side PVC Food Grade :- Yes Thickness (mm):- 0.8mmWater Proofness:- 200 PSI Standred Colour :- Grey Base Febric: High Teenacity Polyster Filament Yarn Temprature:--10 to +60 Degree Celcius PH Range :- 3 to 13 Tested:- 2Kg/cm2 for any leaks Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56897596
AUTHORITY Government Departments
TENDER VALUE 7.10 Lakhs
LAST DATE 17-08-2026
Authority
Authority Name Irrigation And Public Health Department
Work Description Tender for Restoration And Rain Damages To Water Supply Scheme Pinni In Gp Pinni In Tehsil Bhuntar Distt Kullu (Sh:- Providing, Fabrication, Installation And Errection Of Steel Zinc Aluminium Storage Tank Of 30,000 Ltr Capacity At Pinni) Under Pdna Estimated Cost= 7,10,129 Earnest Money=14,500 Time= 2 Months
Basic Detail
Tender No 5218-67 Pinni
Bidding Type Tender
Location
City Kullu
State Himachal Pradesh
Key Dates
Publish Date 07 Aug 2026
Submission Date 17 Aug 2026
Open Date 18 Aug 2026
Finance
Tender Value 7.10 Lakhs
Tender Fee 350
EMD 14500
Exemption Not Available
Document List
FORMEIGHT.pdf
FORMSIX.pdf
Tendernotice_1 (11).pdf
TERMANDCONDITION.pdf
b55283ed-6070-498b-9b33-4b7112421672.html
BOQ_208844.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Aug 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
pdf

FORMEIGHT.pdf

pdf

FORMSIX.pdf

pdf

Tendernotice_1 (11).pdf

pdf

TERMANDCONDITION.pdf

html

b55283ed-6070-498b-9b33-4b7112421672.html

xls

BOQ_208844.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders