Tender For Provision Of Flag Staff, Walls And Allied Services At 8 Wg At Af Stn Ad Ur
Tender Value
43.65 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
14 days left
EMD
87300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Flag Staff, Walls And Allied Services At 8 Wg At Af Stn Ad Ur
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTION |
| 2 | Excavation in tranches n.exc 1.5 mtr wide and n.exc 1.5 m deep in trenches n.exc 1.5m wide on soft soil and getting out complete all as specified and directed. |
| 3 | Returning, including spreading, levelling, watering and well ramming in not exceeding 25 cm thick complete all as specified and as directed. |
| 4 | M&L for hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 5 | M&L for 75mm thick PCC type C-1 1:3:6 (40mm graded aggregate ) as in plinth protection, all as specified and as directed. |
| 6 | M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in cm 1:4 complete all as specified and directed. |
| 7 | M& L for Walling of squared rubble, regular coursed,well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed. |
| 8 | M&L for Flush pointing to squared rubble masonry, coursed or uncoursed in cement mortar 1:3 complete all as specified and directed. |
| 9 | M&L for 40 mm thick Damp proof course using PCC 1:2:4 (using 12.5 mm graded aggregate) mixed with WPC as per manufacturer instrucion to horizontal or vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and directed. WPC shall be measured and paid seperately. |
| 10 | M&L for machine cut dholpur stone solid block (size and colour will be approved by Engr in Charge) with smooth facework on both sides (i.e.) front and rear side), straight corners set in CM 1:4 and jointed in cement and stone dust mortor 1:3, recess with an admixtrue of white cement and dholpur stone dust in 1:1 complete all as specified and as directed. |
| 11 | M & L for Stainless Steel work of Grade-304 as in vertical post of any type and size (upto 150mm dia) including special shaped washers, channels, plates horizontal/ vertical also ornamental works like designer railing chain, lattoo any type and size as approved by GE and as reqd at site made of hollow tubes or in any other shape as per requirement at site, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary nuts and bolts dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. (Note :- No extra payment shall be made to the contractor for ornamental works of this item). |
| 12 | S & F Machine carved solid red stone pillar and ashoka emblem of following sizes (In case of single pillar is not available small blocks shall be used and will be grouted together as specified to make a monolithic pillar). Pillar and Ashoka emblem shall be grouted together to make a solid joint complete all as specified and directed by Engr - in - Charge (a) 1.20 Mtr Dia and 4.00 Mtr High(b) Ashoka Emblem of 0.90 bottom dia and 1.20 Mtr HighNote : Architectural Design and shape will be desicided by GE. Contractor to get all design and shape approved from GE before placing order. |
| 13 | M&L for RCC M.25 Design mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 14 | M&L for RCC M.25 Design mix as in column , pillar etc complete all as specified and directed. |
| 15 | M&L for form work as in curved surface rough finished surfaces of concrete to sides of concrete foundation footings & bases of column, raft & raft beams and soffits (if any) of foundation ,plinth beams and similar works etc complete all as specifide and as directed. |
| 16 | M&L for form work as in curved surface rough finished surfaces of concrete to sides of concrete foundation footings & bases of column, raft & raft beams and soffits (if any) of foundation ,plinth beams and similar works etc complete all as specifide and as directed. |
| 17 | M&L for TMT bars 10mm dia and over cut to length bent to shope reqd incl cranking, bending, spirally for hooping for column hooking ends incl binding with and incl mild steel wire (annealled) not less than 0.90mm dia or securing with clips comlete all as specified and directed. |
| 18 | M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shope reqd incl cranking, bending, spirally for hooping for column hooking ends incl binding with and incl mild steel wire (annealled) not less than 0.90mm dia or securing with clips comlete all as specified and directed. |
| 19 | E/M PORTION |
| 20 | Supply and lay dry river sand including spreading, levelling, punning for cushioning with a layer 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cable in trench/duct complete all as specified and as directed.Note: For measurement purpose only punned thickness (overall 18 cm) shall be considred for measurement and payment. |
| 21 | Supply and lay locally availabel, sub class 'B' Bricks (old size), laid flat and perpendicular to the direction of cable adjacent to each other in trenches over the cable for protection complete all as specified and as directed. |
| 22 | M&L for boring of holes under roof, pavement, hardstanding by trenchless technology using ultrasound technique and necessary machine including HDPE pipe of 63mm dia suitable for 0.4mpa working pressure complete all as directed. |
| 23 | S&F LED strip (profile light), power consumption not more than 5 Watt/Mtr, IP-67 suitable for outdoor use, lemen efficacy not less that 1500 lumens/mtr, warm white colour complete all as specified and directed. |
| 24 | Supply and laying in trenches, LT underground cable, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area 6 Sqmm, 4 core multistranded including cable connecting lugs, glands,jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and as directed. |
| 25 | S&F sheet metal enclouser (DB) double door single pole and netural 8 way, 240 volt with 200 Amps rated bus bar complete all as specified and as directed. |
| 26 | S&F MCB Triple pole and Neutral, 415 volts, 32 Amps, 'C' Curve, 10 KA, including disconnecting, taking down old/unserviceable, MCB Triple pole and Neutral complete all as specified and as directed |
| 27 | S&F 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 28 | M&L for Submain wiring alongwith PVC insulated unsheadhed multi stranderd copper conductor cable of size 2x2.5 sqmm+1x2.5 sqmm earth wire FRLS in and including non metalic concealed PVC conduit medium grade suitable dia as per SSR specification. |
| 29 | S&F outdoor waterproof (IP-65/66) long distance straight beam spot light (warm white colour) 10 Watt, 230 Volt complete all as specified and directed. |
| 30 | S&F in analog time switch with battery backup, 3 pole module, 24 hours programmable every 20 min, backup of 100 hrs, current capacity 32 Amps, with 1 change over complete with connection testing and commissioning including enlosure box all as specified and directed.Make:- Indi Asian model 3 mod DIN Daily, Cat No TA 926453 or its Techno commercial equivalent. |
| 31 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender