Tender For Special Repairs To Servant Quarters Including Internal Electrification In Circle (Block No 1 To 5) At Dssc Wellington
Tender Value
44.95 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
5 days left
EMD
89900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Servant Quarters Including Internal Electrification In Circle (Block No 1 To 5) At Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed. |
| 2 | Demolition of Concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | Dismantling floor, hearth or wall tiling of any description and any thickness incl cement mortar bedding (but not backing), rubbish off the premises complete all as specified and as directed. |
| 4 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling of chajjs/ roof projection etc finished even without using extra cement complete all as specified and directed. |
| 5 | M&L Rendering 15 mm thick in vertical in CM 1:4 finished even without using extra cement on concrete or brick surfaces complete all as specified and as directed. |
| 6 | M&L Rendering 10 mm thick in vertical surface in CM 1:4 finished even without using extra cement on stone complete all as specified and as directed. |
| 7 | M&L for non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 8 | M&L for non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in skirtings to match with above item set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster bed in CM 1:4 complete all as specified and as directed. |
| 9 | M&L for coloured glazed ceramic tiles in vertical surfaces of size 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as set in 10mm thick CM 1:4 complete all as specified and as directed. |
| 10 | M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 11 | M&L for Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate as in floors for levelling course complete all as specified and as directed. |
| 12 | M&L for providing and laying water proofing treatment to sunken floor portion of WC ,Bathroom etc,by applying first layer of slurry of cement @0.488 kg/Sqm mixed with Dr fixit or Equivalent Acrylic based polymer modified cementitious (PMC) composite compound @ 0.253kg/sqm and second layer of slurry of cement 0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126kg /sqm including fixing of spout pipe complete all as specified and as directed. |
| 13 | M & L 20mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for roof slab/ floor complete all as specified and as directed. (Note:-liquid water proofing compound are measure seperately) |
| 14 | M & L 15 mm thick cement screed in cement mortar 1:4 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for vertical surfaces complete all as specified and as directed. (Note:-liquid water proofing compound are measure seperately) |
| 15 | M&L PCC 1:4:8 type D2 with 40mm graded stone aggregate as in sunken floor/toilet floor /kitchen floor / Mahhole concrete finished the surfaces even and fair to receive top layer all as specified and as directed. |
| 16 | M&L cement concrete 40mm thick type B1, 1:2:4 using 20mm graded stone aggregate as in flooring using liquid water proofing compound of approved make complete all as specified and as directed. (Note:-liquid water proofing compound are measure seperately) |
| 17 | M&L 75mm thick Plain Cement Concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in floors, plinth protection etc. finished even & fair complete as specified and as directed. |
| 18 | M&L for Machine cut cudappah stone slab 20-25 mm thick laid over cement screed bed in CM 1:3 20mm mm thick and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of cudappah stone including cutting and polishing complete all as specified and as directed. |
| 19 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking platforms etc for even and smooth finish complete all as specified and as directed. |
| 20 | Supply only liquid water proofing compound of approved make complete all as specified and as directed. |
| 21 | Taking down door/ window chowkats or frame with shutter (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and as directed. |
| 22 | Taking down door/window chowkats or frame with shutter (without taking off shutters from the frames) exc. 1.5 Sqm & n. exc. 4.00 Sqm each complete all as specified and as directed |
| 23 | Supply & Fixing 2nd class hard wood plain solid ,straight chowkhats and frames wrought framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 24 | Supply and fix Glazed and skeleton shutters, of second class hard wood of thickness 30 mm open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); etc complete all as specified and as directed. |
| 25 | Supply and fix factory made 30mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type one face is covered with decorative face veneer with lipping/frame to match and fitted to chowkats etc., complete all as specified and as directed. |
| 26 | S&F Solid PVC Door Frame of size 50mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be painted to match with prelam sheet complete as specified and as directed. |
| 27 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 28 | S&F 125mm, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 29 | S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed. |
| 30 | S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete as specified and as directed. |
| 31 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed. |
| 32 | S&F 125mm, butt hinges medium weight complete as specified and as directed |
| 33 | S&F sheet glass ordinary quality 4.0 mm thick in square. N. exc. 0.50 sqm in each pane and glazing with oil putty complete all as specified and as directed. |
| 34 | S&F sheet glass ordinary quality 4.0 mm thick in square. exc. 0.50 sqm in each pane and glazing with oil putty complete all as specified and as directed. |
| 35 | Supply & Fixing MS work as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and as directed. |
| 36 | M&L for tarring back of chowkat, area tarred exc 0.10 sqm but n.exc 0.5 sqm each complete all as specified and as directed. |
| 37 | All as per item 36 above here in before but treating small articles such as hold fast etc tarred area n. exc 0.10 sqm each |
| 38 | S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 39 | S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 40 | Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 41 | Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 42 | Refixing of old GI steel tubes and connections after cleaning of 15 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 43 | Refixing of old GI steel tubes and connections after cleaning of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 44 | Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall complete all as specified and as directed. |
| 45 | S&F sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and as directed. |
| 46 | S&F in repair Stainless steel kitchen plate rack of 24mm X 36mm X 10mm fixed to wall with clamping screws by assembling all the plates and vertival rods to receive utensils complete as specified and as directed. |
| 47 | S&F new outlet 75mm PVC (SWR) floor trap/ multi trap with stainless steel grating and new wall crossing and filling with PCC 1:2:4 with waterproofing compound incl matching with existed tile and joining with outer pipe line with solvent all as specified and directed . |
| 48 | S&F in repair 100mm dia PVC floor multi trap with and grating complete all as specified and as directed. |
| 49 | S&F Wash basins, Vitreous China 450 x 300 mm (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe with Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed including PVC connectors of 450 mm complete all as specified and as directed. |
| 50 | Supply and fix in repairs vitreous china wash down water closet squatting pan, Orissa pattern of size 580x440mm with integral foot rest , colour white with and including P trap, lime concrete bedding and making necessary connection to soil pipes and flushing cistern etc.,complete all as specified and as directed. |
| 51 | Supply and fix PVC valve less, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets, PVC flush pipe, over flow pipe etc., including taking down the exiting one complete all as specified and as directed. |
| 52 | Supply and fix in repairs Bib tap 20mm standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and as directed. |
| 53 | Supply and fix 15mm dia Angular valve with wall flange all as specified. fixed in repairs complete all as specified and as directed. |
| 54 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 55 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 56 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 57 | S & F PVC (SWR) bends any radious 110 mm bore provided etc all as specified and as directed. |
| 58 | S & F PVC (SWR) bends any radious 75mm bore provided complete all as specified and as directed. |
| 59 | S & F PVC (SWR)110mm bore branch piece single(single T) equal or Unequal provided with access door complete all as specified and as directed. |
| 60 | S & F PVC (SWR)75 mm bore branch piece single(single T) equal or Unequal provided with access door complete all as specified and as directed. |
| 61 | S & F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed. |
| 62 | S & F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed. |
| 63 | M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid blocks 10cm width and setting in mortar(1:6) complete as specified and as directed. |
| 64 | M&Lfor Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid blocks exc 10cm width and setting in mortar(1:6) complete as specified and as directed. |
| 65 | Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar complete as specified and as directed. |
| 66 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 67 | M/L for preparing new surface of steel over 10 cm girth or width and appling two coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and as directed. |
| 68 | M& L for applying three coats of white wash on walls including preparation of newly plastered surfaces of wall complete all as specified and as directed. |
| 69 | M&L for complete removal of existing treatment on surfaces of wall and applying three coats of white wash complete all as specified and as directed. |
| 70 | M&L for complete removal of existing treatment on surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 71 | M& L for applying three coats of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed. |
| 72 | S&F Rotational moulded polyethylene three layer water storage tanks of 500L capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 73 | Dismantling water tanks exc 250 L and n.exe 500 Land removing to store complete all as specified and as directed. |
| 74 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 75 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.. complete all as specified and directed . |
| 76 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed . |
| 77 | Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed |
| 78 | M&L for point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed cable 1100 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth ) in and including PVC conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one light point / fan / call bell point controlled by one modular switch 6 A one way Note : Location of light points , 6 Amps socket point and light fitting may be decided by Engr-in-charge as per site / user requriement. |
| 79 | All as described in Sl Item No 78 herein before but 3 pin socket out let 6 Amps on independent board |
| 80 | M&L for point wiring complete all all as specified with 1100 Volts grade 4 sqmm single core PVC insulated FRLS 1000 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth ) in and including stove enamelled steel conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one three pin modular switch socket 16 Amps outlet on independent board |
| 81 | S & F Socket 6A/16A - 2/3 pin combined 2 module, all as specified and directed. |
| 82 | S & F Socket, 6A - 2/3 pin combined 2 module, all as specified and directed. |
| 83 | M&L Modular switch 1 way 16A, 1 module all as specified and directed. |
| 84 | M&L Modular switch 1 way 6A, 1 module all as specified and directed. |
| 85 | S&F Modular type Bell switch single pole 6 Amps one way, one module all as specified and as directed. |
| 86 | S&F Call Bell, AC, ding dong type 230 Volt complete all as specified and directed. |
| 87 | S&F ceiling rose surface mount PVC/Polycarbonate, isolated body with face bakelite two/three terminals complete all as specified and directed. |
| 88 | S&F modular white cover plate with frame, 2 module complete all as specified and directed. |
| 89 | S&F modular white cover plate with frame, 3 module complete all as specified and directed. |
| 90 | Supply and fixing LED lights fitting 1x 20W, 220V, AC , (4 ft.) High performance electronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 91 | Supply and fixing LED lights fitting 1x 10W, 220V, AC , (2 ft.) High performance electronic driver , operating temperature 10° C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 lm/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 92 | S&F decorative bulk head edge lit LED luminaire 10W with min 120 lumens/watt output IP >= 65,IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 120 lumens/watt output made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed . |
| 93 | S&F in repair LED street light /security light luminaries fitting 1X30 watt LED with min 120 lumens/watt output including GI bracket made out of GI pipe light grade 25 mm dia 1.20 m long bent to shape with suitable size mild steel clamps of size 50 X 6mm with nut, bolt, & washers as required at site for fixing of street light on LT poles / wall including making connection with PVC insulated 3 single core of 1.5 sqmm size multistranded copper conductor cable complete all as specified and directed. Please Enable Macros to View BoQ information |
| 94 | S&F in repair LED street light /security light luminaries fitting 1X30 watt LED with min 120 lumens/watt output including GI bracket made out of GI pipe light grade 25 mm dia 1.20 m long bent to shape with suitable size mild steel clamps of size 50 X 6mm with nut, bolt, & washers as required at site for fixing of street light on LT poles / wall including making connection with PVC insulated 3 single core of 1.5 sqmm size multistranded copper conductor cable complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender