Tender For Repair/Maint To Chitragupta Colony And Certain Area Under Age B/R (Central) Of Ge (North) Pune.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
5 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Chitragupta Colony And Certain Area Under Age B/R (Central) Of Ge (North) Pune.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed |
| 2 | All as per item No 01 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed |
| 3 | Taking down shutters of any description not exc. 1.00 sq. m each complete all as specified and directed |
| 4 | All as per item No 03 above but exc 1.0 sq. m but n exc 2.0 sqm each complete all as specified and directed |
| 5 | S&F Aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 6 | S&F Aluminium Powder coated (Thickness or powder coating not less than 50 micron) window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21,100mm long (2 No.) suitable handle (1No.) complete all as specified and as directed. |
| 7 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/rubber beading in square n exc 0.5 sqm in each, complete all as specified and as directed. |
| 8 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/rubber beading in square n exc 0.5 sqm in each extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side ,complete all as specified and as directed. |
| 9 | S&F for powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 150 mm handles 2 Nos in each shutter, 200 mm tower bolt 01 No in each shutters , 100 mm 03 Nos stainless steel hinges in each shutter, anodised aluminum snap beading screws etc complete all as specified and as directed. |
| 10 | S&F 4.8 mm thick Sheet glass, selected quality, in squares exc. 0.5 sq. m each pane glass, each pane fixed with aluminum frame work complete all as specified and as directed. |
| 11 | S&F in 2-3 mm thick ACP (Aluminium composite panel) Sheet of selected quality, fixed with aluminum frame work in aluminium doors including aluminium beading and neoprene rubber complete all as specified and as directed. |
| 12 | S&F in repair 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed |
| 13 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 14 | S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 50 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed. |
| 15 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 70 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed. |
| 16 | S&F for second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt I, section 8, clause 8.24 (a) supplied and fitted to chowkats including two coat of synthetic enamal paint over one coat of pink primer all as specified and directed. |
| 17 | S&F for 30 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed. |
| 18 | S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick PVC lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm. |
| 19 | S&F 2nd class hardwood 30 mm thick Glazed and skeleton windows shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 20 | S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 21 | S&F 150 mm brass handles, cast type,polished bright fixed with screws complete all as specifed and directed by Engr-in-Charge |
| 22 | S&F 200 mm brass tower bolts, cast type,polished bright fixed with screws complete all as specifed and directed by Engr-in-Charge |
| 23 | S&F 100 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed complete all as specifed and directed by Engr-in-Charge |
| 24 | S&F 4mm thick frost sheet glass ordinary quality in any type of frames and glazing with beading in square n. exc. 0.5 Sqm in each pane complete all as specifed and directed |
| 25 | M&L for preparation of new wood or wood base surfaces and applying malamine polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed. |
| 26 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed. |
| 27 | S &F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed. |
| 28 | S&F Stainless steel butt hinges medium weight 100mm complete all as specified and as directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm |
| 29 | S&F in repair 300mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 30 | S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete all as specified and directed. |
| 31 | S&F 250 mm long Stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and including a mini of 6 bolts and nuts, four on bolt plate and two on staple plate (selected quality as approved ) complete all as specified and as directed. |
| 32 | S&F stainless steel tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 33 | S&F stainless steel handle of 150 mm (selected quality as approved) long fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 34 | S&F in repair for floor door stopper of brass body and tongue not less than 140mm long, anodised with hard drawn steel spring all as specified and as directed. |
| 35 | S&F in repair drapery curtain rod of stainless steel 20mm dia complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and as directed. |
| 36 | S&F in repair bracket for curtain rod of stainless steel 20mm dia fixed with rawl plug and steel screw complete all as specified and directed |
| 37 | S&F in repair stainless steel hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 38 | S&F 18/19mm thick ply wood for insulation purposes fixed fixed with to timber framed work inl taking down with existing one complete all as specified and as directed. |
| 39 | S&F for HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size as in cupboards/shelves/cabinets and similar work etc including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 40 | S & F continuous (piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed. |
| 41 | S&F stainless steel handle of 75 mm size (modular selected quality of design as approved) fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 42 | S&F magnet catch for cupboard shutters fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 43 | S&F in repair stainless steel mortice lock,vertical type, size 100mm with 4 levers fixed to door complete all as specified and as directed. |
| 44 | S&F in repair brass body sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a mini of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long(selected quality as approved ) all as specified. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 46 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 incl complete all as specified and as directed. |
| 47 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.Note:- Design/pattern of tiles as approved by Engr-in-charge |
| 48 | -Ditto- all as per item no. 47 above but skitings/dado on vertical surfaces including 10 mm thick backing coat of cement plaster in CM 1:4 complete all as specified and as directed. |
| 49 | M&L for glazed ceramic coloured tiles of size 300x450x7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM1:4 including highlighter/border/pattern as approved by Engr-in-charge complete all as directed. |
| 50 | M&L for glazed ceramic coloured tiles of size 600x300x7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM1:4 including highlighter/border/pattern as approved by Engr-in-charge complete all as specified and as directed. |
| 51 | M&L coloured vitrified double charged tiles 8-10mm thick (square/ rectangular) area of each tile n.exc 0.36 sqm as in floor laid in any pattern etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 of any description complete all as specified. Note:- Design/pattern of tiles as approved by Engr-in-charge |
| 52 | -Ditto- all as per item no. 51 item above but skitings/dado on vertical surfaces including 10mm thick backing coat f cement plaster in CM 1:4 complete all as directed. |
| 53 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub base complete all as specified and as directed |
| 54 | M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. |
| 55 | Labour only for paver blocks laid over sand cushioning including dismantling of existing paver blocks of any size and shape complete all as specified & as directed. |
| 56 | M&L for crushed sand for cushioning under paver blocks complete all as specified and as directed. |
| 57 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including of existing as directed |
| 58 | M&L for machine cut 20-25mm thick polished cudappah stone slab as in shelves, partitions, cooking platfoRM below granite stone and like including necessary jointing and pointing in cement mortar and making good to disturbed surface including dismantling of existing stone slab complete all as specified and directed |
| 59 | M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB platform and like set in cement mortar (1:4) including pointing in white or coloured cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling of existing stone slab complete all as specified and as directed. |
| 60 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and directed |
| 61 | M&L for 25mm thick 2nd Class Hardwood planks (Boarding) of required size or , Cross sectional area not less than 50 Sqcm in flooring complete as per manufacturers instruction. |
| 62 | Dismantling & Refixing of 25mm thick 2nd Class Hardwood planks (Boarding) of required size or as approved size, Cross sectional area not less than 50 Sqcm in flooring complete as per manufacturers instruction |
| 63 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0 m height of Bldg complete all as specified and as directed. |
| 64 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 12.0m height of Bldg with using @ 2% WPC on cement complete all as specified and as directed. |
| 65 | M&L for rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement upto 12.0mtr height of bldg complete all as specified and directed |
| 66 | M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar complete all as specified and directed. |
| 67 | M&L for pre-cast cement concrete block masonry with solid blocks exc10 cm in width, type C-1,1:3:6 (using 20mm graded stone aggregate) and setting in cement mortar 1:6 including demolition of existing complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 68 | M&L for pre-cast cement concrete block masonry with solid blocks exc10 cm in width, type C-1,1:3:6 (using 20mm graded stone aggregate) and setting in cement mortar 1:6 including demolition of existing complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender