Tender For Requirement Of Spares For Hydac Make Hydraulic System (Boiler And Turbine Area) Installed At 2X660 Mw Csctpp,Chhabra

Sharing tender

Tender for Requirement Of Spares For Hydac Make Hydraulic System (Boiler And Turbine Area) Installed At 2X660 Mw Csctpp,Chhabra , Accumulator : It Consists Of Shell (37 Ltr) (Material:-34Crmo4), High Flow, Design Pr.: 330 Bar, Test Pr.: 495 Bar (Only For Shell), Operating Temp.:-10 To 80 °C, Max. Flow Rate:-40 Lps, Bladder 32L(Bladder Material:-Nbr*7/8-14/Vg5 P460nh), Gas Valve Insert, Retaining Nut, Valve Guard, Oil Valve Body, Poppet, Clamping Sleeve, Spring, Anti Extrusion Ring With Valve Seal, Vent Screw, Mounting Flange, Lock Nut, Seal Cap, Valve Protection Cap &O-Ring (O-Ring - 69Mmx3.53Mm Nbr 80 Shore A) Sb330hbn-32F1/112-330S-Aa00204 , Bladder : Bladder 32L,(Material:-Nbr*7/8-14/Vg5 P460nh) (Vg5 P460nh) , Duplex Pressure Line Filter Housing For Mill Hydraulic System(Change Over Type):- Filter Type:- Dfdk :- Filter Material, Bn/Hc, Beta Micron (Bn4hc), Size Of Filter Or Element:-110, Operating Pressure:-315 Bar, Fatigue Strength:-At Nominal Pressure 10ᶝ Cycles From 0 To Nominal Pressure,Temperature Range -10°C To +100 °C (-30°C To-10 °C : Pmax=157.5Bar) , Material Of Filter Head En-Gjs-400-15, Material Of Filter Bowl:-Steel ,Type And Size Of Connection:- G¾, Type Of Clogging Indicator:- Steel Blanking Plug In Indicator Port (Differential Pressure Measurement Up To 420 Bar Operating Pressure), Pressure Setting Of The Clogging Indicator 8 Bar, Type Code:- Model With One-Piece Filter Bowls, Housing Consist Of A Filter Head With Screw-In Filter Bowls, Ball Change-Over Valve, Connection For A Clogging Indicator Drain Screw With Pressure Relief, Pressure Equalization Line (Dfdkbn/Hc110qac10a1.1 ) , Nitrogen Charging Kit (Fpu-1-40F5g2a3k/H) , Gear Pump , Check Valve , Oil Heater , Pressure Relief Valve , Seal Kit Bladder Sa 16A-200F7/112U-16A-Dn 100 , Gas Valve Suitable For Sa 16A-200F7/112U-16A-Dn 100