Tender For Landscaping And Chowks Development In Dharamshala
Tender Value
1.96 Crore
Estimated cost
Bid Submission
01 Sep 2026
10 days left
EMD
3.92 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Landscaping And Chowks Development In Dharamshala
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Aug-2026 | DATE EXTENSION | Date | 01-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, including getting out the excavated soil/ordinary rock and disposal of surplus excavated soils upto all lead and lift as per direction of Engineer In Charge. All kinds of soil |
| 2 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge. |
| 3 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :In cement mortar |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc |
| 5 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying cement concrete mechanically mixed 1:4:8 (1 cement: 4 sand: 8 graded stone aggregate 40mm nominal size) curing complete including cost of form work in foundation and plinth including carriage of material upto all leads and lifts and as per direction of Engineer in charge.(shuttering included) |
| 8 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 9 | Providing and filling of stone solling under floors /boulder filling behind retaining walls of selected hard stone including carriage of material in all leads & lifts and as per direction of Engineer In Charge. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 11 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 12 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe of 4.5kg/cm2, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications i/c carriage of material in all leads & lifts and as per the direction of Engineer in Charge |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 gradedstone aggregate 20 mm nominal size) |
| 14 | Providing and laying heavy duty natural cobble stone 100x100x80mm laid over 25mm average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and i/c pointing and curing rubbing & polishing complete as per the design patteren and colour approved (Sub base concrete floor to be paid for separately), including carriage of material in all leads and lifts and as per direction of Engineer in Charge. |
| 15 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes |
| 16 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.Red /yellow sand stone |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 18 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade.Area of slab over 0.50 sqm |
| 19 | Providing and fixing Cast iron decorative upper ornamental railing of size 300 mm wide welding with SHS 25X25X3mm complete all as per drawing and technical Specification complete with all accessories/welding as required and as directed by Engineer-in-charge and colour & pattern as decided by DSCL |
| 20 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 21 | Providing, fabricating, supplying, transporting and installing an 8 ft (2.44 m) high realistic artistic sculpture of the Western Tragopan (Jujurana)with proportionate width maintaining the approved aspect ratio of the design (approximately 3ft to 3.5 ft maximum width), the State Bird of Himachal Pradesh, fabricated from recycled scrap metal (MS/Steel/SS scrap components), including cutting, bending, welding, grinding, realistic artistic detailing, anti-corrosion/rust-proof treatment, epoxy primer,painting, UV-resistant protective clear coat, complete with heavy-duty MS base plate, anchor bolts, transportation, erection, testing and commissioning, complete in all respects as per the approved design and directions of the Engineer-in-Charge.The item shall include integrated decorative LED architectural lighting. The contractor shall provide one (01) realistic sample model of the Western Tragopan (Jujurana) sculpture of 1 ft (300 mm) height, fabricated using the same materials, workmanship and finish as proposed for the final sculpture, for approval of the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. The cost of the sample model shall be deemed to be included in the quoted item rate and no separate payment shall be be made. |
| 22 | Providing, carving, fabricating, supplying, transporting and installing a realistic Pine Cone sculpture(Logo of Municiapl Corporation Dharamshala) of overall height 8 ft (2.44 m) with proportionate width maintaining the approved aspect ratio of the design (approximately 4 ft to 4.5 ft maximum width), carved from premium quality Yellow Sandstone, including dressing, fine carving, surface finishing, polishing, edge treatment, complete with pedestal/base, anchor fasteners, lifting, transportation, erection, alignment, fixing with approved non-shrink grout, all labour, tools, machinery and incidental works, complete in all respects as per the approved design and the directions of the Engineer-in-Charge. The item shall include integrated decorative LED architectural lighting.The contractor shall submit one (01) realistic sample model of the proposed sculpture of 1 ft (300 mm) height, prepared using the same material, detailing and finish, for approval by the Engineer-in-Charge prior to commencement of the full-size sculpture. The cost of the sample model shall be deemed to be included in the quoted item rate and no separate payment shall be made. |
| 23 | Providing, carving, fabricating, supplying, transporting and installing an 8 ft (2.44 m) high realistic artistic sculpture of a Morel Mushroom (Gucchi) carved from premium quality Yellow Sandstone, including intricate hand carving, dressing, surface finishing, polishing, edge treatment, weather-resistant protective coating, complete with stone pedestal, stainless steel dowel pins, anchor fasteners, lifting, transportation, erection, alignment, fixing with approved non-shrink grout, testing and commissioning, complete in all respects as per the approved design and the directions of the Engineer-in-Charge.The item shall include integrated decorative LED architectural lighting. The contractor shall prepare and submit one (01) realistic sample model of the proposed Morel Mushroom (Gucchi) sculpture of 1 ft (300 mm) height using the same Yellow Sandstone, workmanship and finish for approval by the Engineer-in-Charge prior to commencement of the full-size sculpture. The cost of the sample model shall be deemed to be included in the quoted item rate and no separate payment shall be made. |
| 24 | Providing, fabricating, supplying, transporting and installing a realistic artistic Himalayan Pink Rhododendron (Buransh) Tree Sculpture( State Flower of Himachal Pradesh) of overall height 8 ft (2.44 m) and maximum width 4 ft to 4.5 ft (1.20 m to 1.37 m), maintaining the approved design and aspect ratio, fabricated from recycled scrap metal (MS/Steel/SS metal components), including trunk, branches, leaves and flower clusters with intricate artistic detailing, cutting, bending, rolling, welding, grinding, anti-corrosion/rust-proof treatment, epoxy primer, weather-resistant polyurethane finish, complete with heavy-duty MS structural frame, base plate, anchor bolts,, transportation, erection, testing and commissioning, and all incidental works, complete in all respects as per the approved design and directions of the Engineer-in-Charge. The contractor shall prepare and submit one (01) realistic sample model of the proposed Rhododendron (Buransh) Tree Sculpture of 1 ft (300 mm) height, maintaining the same aspect ratio, using the same material, workmanship and finish for approval by the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. The item shall include integrated decorative LED architectural lighting.Fabrication of the final sculpture shall commence only after obtaining written approval of the sample model. The cost of the sample model shall be deemed to be included in the quoted item rate, and no separate payment shall be made. |
| 25 | Providing, fabricating, supplying, transporting and installing a realistic artistic Cricket-themed sculpture comprising an inclined Cricket Bat and Cricket Ball with stylized Himalayan mountain backdrop and \\"HPCA\\" lettering, having overall dimensions of 6 ft (1.83 m) height and 5 ft (1.52 m) width, fabricated from recycled scrap metal (MS/Steel/SS metal components) with intricate artistic detailing, including cutting, bending, rolling, welding, grinding, surface finishing, anti-corrosion/rust-proof treatment, epoxy primer and weather-resistant polyurethane finish, complete with heavy-duty MS structural frame, base plate, anchor bolts, RCC foundation, transportation, erection, testing and commissioning, and all incidental works, complete in all respects as per the approved design and directions of the Engineer-in-Charge. The item shall include integrated decorative LED architectural lighting.The contractor shall prepare and submit one (01) realistic sample model of the proposed sculpture of 1 ft (300 mm) height, maintaining the same aspect ratio, using the same material, workmanship and finish for approval by the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. Fabrication of the final sculpture shall commence only after obtaining written approval of the sample model. The cost of the sample model shall be deemed to be included in the quoted item rate, and no separate payment shall be made. |
| 26 | Providing, fabricating, supplying, transporting and installing a realistic artistic textexed surface Himachali Topi Sculpture having overall dimensions of 6 ft (1.83 m) height and 6 ft (1.83 m) diameter, fabricated from recycled scrap metal (MS/Steel/SS metal components) with heavy-duty internal structural framework, including cutting, bending, rolling, welding, grinding and intricate artistic detailing. The sculpture shall faithfully replicate the traditional Himachali Topi with a textured grey crown and a multicoloured embroidered band finished in traditional Himachali motifs using high-quality weather-resistant automotive-grade PU paints/enamel colours. The work shall include sand blasting, anti-corrosion/rust-proof treatment, zinc-rich epoxy primer, epoxy intermediate coat, UV-resistant polyurethane protective coating, surface finishing, complete with heavy-duty MS base plate, anchor bolts, transportation, erection, testing and commissioning, and all incidental works, complete in all respects as per the approved design and directions of the Engineer-in-Charge.The item shall include integrated decorative LED architectural lighting. The contractor shall prepare and submit one (01) realistic sample model of the proposed Himachali Topi Sculpture of 1 ft (300 mm) height, maintaining the same aspect ratio, material, colour scheme, workmanship and finish for approval by the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. Fabrication of the final sculpture shall commence only after obtaining written approval of the sample model. The cost of the sample model shall be deemed to be included in the quoted item rate, and no separate payment shall be made. |
| 27 | Providing, fabricating, supplying, transporting and installing a realistic artistic Himachali Traditional Musical Instruments Sculpture comprising two (02) Narshinghas and one (01) Dhol, having overall dimensions of 8 ft (2.44 m) height and 6 ft (1.83 m) maximum width, maintaining the approved design and aspect ratio, fabricated from recycled scrap metal (MS/Steel/SS metal components) with heavy-duty internal structural framework. The work shall include cutting, bending, rolling, forging, welding, grinding, realistic artistic detailing, and application of weather-resistant automotive-grade PU/enamel colours to replicate the traditional metallic finish of the Narshinghas and the wooden body, leather drumheads, ropes and decorative coloured bands of the Dhol. The item shall also include sand blasting, anti-corrosion/rust-proof treatment, zinc-rich epoxy primer, epoxy intermediate coat, UV-resistant polyurethane protective coating, complete with heavy-duty MS base frame, base plate, anchor bolts, transportation, erection, testing and commissioning, and all incidental works, complete in all respects as per the approved design and directions of the Engineer-in-Charge. The item shall include integrated decorative LED architectural lighting.The contractor shall prepare and submit one (01) realistic sample model of the proposed sculpture of 1 ft (300 mm) height, maintaining the same aspect ratio, material, colour scheme, workmanship and finish, for approval by the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. Fabrication of the final sculpture shall commence only after obtaining written approval of the sample model. The cost of the sample model shall be deemed to be included in the quoted item rate and no separate payment shall be made. |
| 28 | Providing, fabricating, supplying, transporting and installing a realistic artistic \\"Namaste\\" Sculpture depicting folded hands, having overall dimensions of 8 ft (2.44 m) height and 5 ft (1.52 m) maximum width, maintaining the approved design and aspect ratio, fabricated from recycled scrap metal (MS/Steel/SS metal components) with heavy-duty internal structural framework. The work shall include cutting, bending, rolling, forging, welding, grinding, intricate artistic detailing using recycled scrap metal components, sand blasting, anti-corrosion/rust-proof treatment, zinc-rich epoxy primer, epoxy intermediate coat and UV-resistant polyurethane protective clear coat to retain the natural metallic appearance of the scrap metal. The sculpture shall be complete with heavy-duty MS base frame, base plate, anchor bolts, transportation, erection, testing and commissioning, and all incidental works, complete in all respects as per the approved design and directions of the Engineer-in-Charge. The item shall include integrated decorative LED architectural lighting.The contractor shall prepare and submit one (01) realistic sample model of the proposed \\"Namaste\\" Sculpture of 1 ft (300 mm) height, maintaining the same aspect ratio, material, workmanship and finish, for approval by the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. Fabrication of the final sculpture shall commence only after obtaining written approval of the sample model. The cost of the sample model shall be deemed to be included in the quoted item rate and no separate payment shall be made. |
| 29 | Providing, fabricating, supplying, transporting and installing a realistic artistic \\"Book and Pen\\" Knowledge Sculpture, comprising an open book, stacked books and a fountain pen, having overall dimensions of 8 ft (2.44 m) height and 6 ft (1.83 m) maximum width, maintaining the approved design and aspect ratio, fabricated from recycled scrap metal (MS/Steel/SS metal components) with heavy-duty internal structural framework. The work shall include cutting, bending, rolling, laser cutting, forging, welding, grinding and intricate artistic detailing to realistically depict the books, pages, fountain pen and inscriptions. The sculpture shall be finished with sand blasting, anti-corrosion/rust-proof treatment, zinc-rich epoxy primer, epoxy intermediate coat and weather-resistant automotive-grade polyurethane (PU) paints to achieve an antique bronze/golden metallic finish with contrasting black detailing and UV-resistant clear protective coating. The item shall include integrated decorative LED architectural lighting, heavy-duty MS base frame, base plate, anchor bolts, transportation, erection, testing and commissioning, and all incidental works, complete in all respects as per the approved design and directions of the Engineer-in-Charge. The item shall include integrated decorative LED architectural lighting.The contractor shall prepare and submit one (01) realistic sample model of the proposed \\"Book and Pen\\" sculpture of 1 ft (300 mm) height, maintaining the same aspect ratio, material, colour scheme, workmanship and finish, for approval by the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. Fabrication of the final sculpture shall commence only after obtaining written approval of the sample model. The cost of the sample model shall be deemed to be included in the quoted item rate and no separate payment shall be made |
| 30 | Providing, fabricating, supplying, transporting and installing a realistic artistic Himalayan Snow Leopard Sculpture, having overall dimensions of 6 ft (1.83 m) height and approximately 8 ft (2.44 m) maximum length with proportionate width maintaining the approved design and aspect ratio, fabricated from recycled scrap metal (MS/Steel/SS metal components) with heavy-duty internal structural frameworkalong with 2 ft height stone shaped pedestal. The work shall include cutting, bending, rolling, forging, welding, grinding and intricate artistic detailing using recycled scrap metal components to realistically depict the Himalayan Snow Leopard, including facial features, fur texture, body contours, paws and curled tail. The sculpture shall be mounted on an artistically fabricated rock-themed metal pedestal integrated with Himalayan mountain motifs. The work shall include sand blasting, anti-corrosion/rust-proof treatment, zinc-rich epoxy primer, epoxy intermediate coat and UV-resistant polyurethane protective clear coat to preserve the natural metallic finish of the scrap metal. The item shall be complete with heavy-duty MS base frame, base plate, anchor bolts, transportation, erection, testing and commissioning, and all incidental works, complete in all respects as per the approved design and directions of the Engineer-in-Charge.The item shall include integrated decorative LED architectural lighting. The contractor shall prepare and submit one (01) realistic sample model of the proposed Himalayan Snow Leopard Sculpture of 1 ft (300 mm) height, maintaining the same aspect ratio, material, workmanship and finish, for approval by the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. Fabrication of the final sculpture shall commence only after obtaining written approval of the sample model. The cost of the sample model shall be deemed to be included in the quoted item rate and no separate payment shall be made. |
| 31 | Providing, fabricating, supplying, transporting and installing a realistic artistic \\"Kangri Dham\\" themed sculpture comprising a traditional Himachali cooking cauldron (Charoti/Boti) with decorative lid, traditional cooking utensils, serving vessels and stylized flame, having overall dimensions of 6 ft (1.83 m) height and 6 ft (1.83 m) maximum width, maintaining the approved design and aspect ratio, fabricated from recycled scrap metal (MS/Steel/SS metal components) with heavy-duty internal structural framework. The work shall include cutting, bending, rolling, forging, laser cutting, welding, grinding and intricate artistic detailing to realistically depict the traditional Kangri Dham cooking setup. The sculpture shall be finished with sand blasting, anti-corrosion/rust-proof treatment, zinc-rich epoxy primer, epoxy intermediate coat and weather-resistant automotive-grade polyurethane (PU) paints to achieve an antique bronze, copper and black metallic finish with UV-resistant clear protective coating. The item shall include integrated decorative LED architectural lighting, heavy-duty MS base frame, base plate, anchor bolts, transportation, erection, testing and commissioning, and all incidental works, complete in all respects as per the approved design and directions of the Engineer-in-Charge. The contractor shall prepare and submit one (01) realistic sample model of the proposed Kangri Dham sculpture of 1 ft (300 mm) height, maintaining the same aspect ratio, material, colour scheme, workmanship and finish, for approval by the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. Fabrication of the final sculpture shall commence only after obtaining written approval of the sample model. The cost of the sample model shall be deemed to be included in the quoted item rate, and no separate payment shall be made. |
| 32 | Providing, fabricating, supplying, transporting and installing a realistic artistic \\"Birds of Dhauladhar\\" Sculpture comprising six (06) indigenous Himalayan bird species, namely Western Tragopan (Jujurana), Himalayan Monal, Himalayan Griffon Vulture, Lammergeier (Bearded Vulture), Chukar Partridge and White-capped Redstart, artistically perched on a naturalistic Himalayan rock formation, having overall dimensions of 5 ft (1.52 m) height and 6 ft (1.83 m) maximum length with proportionate width maintaining the approved design and aspect ratio, fabricated from recycled scrap metal (MS/Steel/SS metal components) with heavy-duty internal structural framework. The work shall include cutting, bending, rolling, forging, laser cutting, welding, grinding and intricate artistic detailing to realistically depict the anatomy, plumage, facial features and natural postures of each bird species, together with a rock-textured base and engraved information plaque. The sculpture shall be finished with sand blasting, anti-corrosion/rust-proof treatment, zinc-rich epoxy primer, epoxy intermediate coat and weather-resistant automotive-grade polyurethane (PU) paints in natural bird colours, followed by UV-resistant clear protective coating. The item shall include integrated decorative LED architectural lighting.The item shall include heavy-duty MS base frame, base plate, anchor bolts, transportation, erection, testing and commissioning, and all incidental works, complete in all respects as per the approved design and directions of the Engineer-in-Charge. The contractor shall prepare and submit one (01) realistic sample model of the proposed sculpture of 1 ft (300 mm) height, maintaining the same aspect ratio, material, colour scheme, workmanship and finish, for approval by the Engineer-in-Charge prior to commencement of fabrication of the full-size sculpture. Fabrication of the final sculpture shall commence only after obtaining written approval of the sample model. The cost of the sample model shall be deemed to be included in the quoted item rate and no separate payment shall be made. |
| 33 | Providing, fabricating, supplying, transporting and fixing an informative/interpretation plaque of size 600 × 450 mm (24\\" × 18\\"), fabricated from 16 Gauge (1.6 mm thick) Grade SS-304 Stainless Steel sheet with laser-engraved/chemical-etched text, graphics, QR code (if required), and high-resolution UV-printed/colour-filled illustrations of the approved design. The plaque shall have a matt/satin finish with anti-graffiti and weather-resistant protective coating, rounded edges, and concealed stainless steel stiffeners at the rear. The work shall include stainless steel stand/frame or wall mounting arrangement (as approved), SS-304 anchor fasteners, foundation/fixing hardware, transportation, installation, alignment, and all incidental works complete in all respects as per the approved drawings and directions of the Engineer-in-Charge. The content, layout, language (Hindi/English), photographs, artwork and QR code shall be approved by the Engineer-in-Charge before fabrication. |
| 34 | Providing, supplying and fixing precast RCC bollards of 150 mm diameter and 650 mm overall height, of approved shape and design, manufactured with M30 grade reinforced cement concrete. The bollards shall be installed by embedding 275 mm below finished ground level in a PCC foundation of size 300 mm × 300 mm × 300 mm in M15 grade cement concrete (1:2:4), leaving 375 mm exposed above ground level. The exposed portion shall be finished with two coats of exterior-grade weather-resistant paint in approved colour, including painting of DMC logo and fixing of high-intensity retro-reflective sheeting/reflectors of approved size, colour and design. The item shall include excavation, laying of PCC foundation, positioning and alignment of bollards, backfilling, curing, transportation, loading, unloading, all leads and lifts, labour, tools, plants and all incidental works, complete in all respects as per the approved drawings, technical specifications and the directions of the Engineer-in-Charge. |
| 35 | Providing, supplying and fixing 0.50 mm thick colour-coated pre-painted galvanised iron (PPGI) profile sheets, manufactured from galvanized steel conforming to IS 277 with a minimum zinc coating of 120 GSM and minimum yield strength of 240 MPa. The sheets shall have a factory-applied paint system comprising a minimum 5–7 micron polyester/modified polyester top coat and suitable back coat, fixed with self-drilling/self-tapping screws complete with EPDM washers, side and end laps, ridge pieces, flashings, trims, sealants and all necessary accessories. The work shall include cutting, drilling, hoisting, handling, loading, unloading, carriage of materials, all leads and lifts, labour, tools and plants, complete in all respects as per the approved drawings and directions of the Engineer-in-Charge. The colour, profile, finish and design pattern of the profile sheets shall be as approved by the Engineer-in-Charge. |
| 36 | Providing, supplying and fixing 0.50 mm thick colour-coated pre-painted galvanised iron (PPGI) liner sheets for ceiling cladding, including cutting to required sizes, drilling, fastening, lapping and fixing to the supporting structural steel framework with self-drilling/self-tapping screws complete with EPDM washers, clips and accessories. The work shall include all necessary welding/fixing with secondary steel members, edge trims, flashings, sealants, carriage of materials, handling, loading, unloading, all leads and lifts, labour, tools, plants and machinery, complete in all respects as per the approved drawings and the directions of the Engineer-in-Charge. The colour, profile and design pattern of the liner sheets shall be as approved by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender