Tender For Addition Alteration To The Compound Wall (P-27) Of H-2 Plot Of Icgs Ratnagiri
Tender Value
40 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
12 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ratnagiri → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition Alteration To The Compound Wall (P-27) Of H-2 Plot Of Icgs Ratnagiri
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the dust debris etc. to a distance not exceeding 250 metres from site and disposing the same complete all as specified and as directed. |
| 3 | Dismantling posts or struts (wood, steel or R.C.C.) embedded in brick masonry or concrete of any section, any description, including taking out embedded portion and making good disturbed vicinity of the post all as per specified and directed. |
| 4 | Dismantling of stone/ PCC block/ brick work masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed. |
| 5 | Material and Labour for PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed. |
| 6 | Material and Labour for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels up to 1.50 metres clear span, cills, steps, seismic and other similar bands, copings, kneelers, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work complete all as specified |
| 7 | Material and Labour for Form work to sides and soffits of floor or roof RCC beam sides of lintel beam flat rough finish surfaces to receive the plaster, complete all as specified and as directed. |
| 8 | Material and Labour for Form work to sides of concrete pillars, posts, struts, piers, columns and stanchion etc. rough finish surfaces complete all as specified and as directed. |
| 9 | Material and Labour for broken glass coping on top of wall in cement mortar 1:3 all as specified and directed. |
| 10 | Material and Labour for Machine cut laterite stone masonry exceeding 10 cm in width square rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 11 | Supply and Fixing Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Grade E-165 all as specified and directed |
| 12 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed |
| 13 | Material and Labour for 15 mm thick rendering in two coats of 10 and 5 mm on stone masonry wall surfaces in cement mortar 1:4 finished fair and even all as specified and as directed. |
| 14 | Supply and Fixing Barbed razor type concertina fencing coil 9 SWG Stainless steel spring tensile wire of UTS 145 to 150 N/Sqm, dia of coil when un-stretched shall be 610mm having minimum of coil (GI Strip) 1.625 Kg/Rm, Stainless steel razor ribbon type of size 0.50 mm thickness, 19mm wide before wrapping on central core wire fixed with 1.66mm thick stainless steel clips (minimum 25 nos/Rm) and special nut and bolts to hold two coil together and extra rows parallel/wire of 10 gauge complete all as specified and directed. |
| 15 | Supply and Fixing stainless steel razor wire with core wire dia 2.5-3 mm and with dual razors at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed.Note:- Each line of wire to be measured |
| 16 | Material and Labour for complete removal of existing treatment by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil or greasy spots including rubbing down steel surfaces or iron work of any description not otherwise described over 10 cm width or girth and applying two coats of Epoxy paints over a coat of epoxy primer over made surface of steel complete all as specified and as directed. |
| 17 | Material and Labour for Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10 cm and applying two coats of Epoxy paints over a coat of epoxy primer over made surface of steel complete all as specified and as directed. |
| 18 | Material & Labour for preparing new plastered surfaces of walls, applying Two or more coats (up to required shade) of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of including required shade (Company Depot Tinted with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ prepared surfaces complete all as specified and directed.Note: - Primer and emulsion to be carried out through air less spray machine (Mechanical means). |
| 19 | Material and Labour for Complete removal of existing treatment by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil or greasy spots including washing rubbing down and stopping of distempered/ lime wash and painted surfaces, applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior sqm paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new / prepared surfaces complete all as specified and directed. Note - Primer and emulsion to be carried out through air less spray machine (Mechanical means) |
| 20 | Contract sum shall be arrived after deducting the credit schedule. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender