Tender For Supply Of 25M Flag Mast. Mast Shaft Shall Be In Two Sections, Hot Dip Galvanised And Suitable For Wind Velocity 250Km/Hr. Top- 200Mm, Bottom- 630Mm, Plate Thickness- Top/Bottom-5Mm/6Mm, Cross Section Of Mast- 20 Side Polygon, Size Of Opening An

Sharing tender

Tender For Supply Of 25M Flag Mast. Mast Shaft Shall Be In Two Sections, Hot Dip Galvanised And Suitable For Wind Velocity 250Km/Hr. Top- 200Mm, Bottom- 630Mm, Plate Thickness- Top/Bottom-5Mm/6Mm, Cross Section Of Mast- 20 Side Polygon, Size Of Opening And Door At Base- 1200 X 250 Mm, Diameter Of Base Plate840 Mm, Thickness Of Base Plate- 30Mm,The Shaft Shall Be Pu Painted With A Coating Of Etch Primer, Primer And Pu Paint,Supply Of System For Raising Lowering Of Flag. It Shall Have Double Drum Winch, 6 Mm Dia Galvanised Wire Rope And Integral Power Tool For The Raising And Lowering Of Flag. Suitable Control Panel Shall Be Provided For Reversing Operation Of Power Tool Motor With 3Cx2.5 Sqmm Copper Armoured Cable,Supply Of National Tri Color Flag Of Size 10Feet X 20 Feet.,Supply Of Foundation Bolts-16 Sets, Pcd Of Foundation Bolts- 830Mm, 30Mm Dia, 850Mm Long. The Foundation Bolt Manufactured From Special Steel Along With Nuts, Washers, Anchor Plates And Templates.,